Bf Xr6t 6 Speed Auto

[BALLBREAKER]

  Xtreme F6 said:

I did a BF XR6T auto today for APC in Myaree, It was for an Older Gent who didnt want to increase boost past 8 psi at any point in the rev range.

Car had an APC dump, cat and twin 2.5 inch exhaust, F6 CAI and a K&N filter. It made 226 rwkw's before tune and was running 6 psi boost..

Running only 8 PSI was a weird request but one I did anyways. Was able to hold 8 psi from begining to 4500 rpm and then it went down to 6.5 all the way through to 6000 rpm... WOuld have been nice to be able to crank it up a little more but under request this was the max power asked for so I kept to that.

Attached graph.

←

Hi simmon,Why is the BF making so much power 246 WITH 8PSI id be very happy with that kind of boost,, great work as allways ,,that's still less boost than a stock BA F6. why can you explain .My car made 215 rwkw with 1800 ks. Is it the dual vvt if it is can uyou flash BF programe into a BF F6,,have tryed this yet? CHEERS BB

[Xtreme F6]

  BALLBREAKER said:

  Xtreme F6 said:

I did a BF XR6T auto today for APC in Myaree, It was for an Older Gent who didnt want to increase boost past 8 psi at any point in the rev range.

Car had an APC dump, cat and twin 2.5 inch exhaust, F6 CAI and a K&N filter. It made 226 rwkw's before tune and was running 6 psi boost..

Running only 8 PSI was a weird request but one I did anyways. Was able to hold 8 psi from begining to 4500 rpm and then it went down to 6.5 all the way through to 6000 rpm... WOuld have been nice to be able to crank it up a little more but under request this was the max power asked for so I kept to that.

Attached graph.

←

Hi simmon,Why is the BF making so much power 246 WITH 8PSI id be very happy with that kind of boost,, great work as allways ,,that's still less boost than a stock BA F6. why can you explain .My car made 215 rwkw with 1800 ks. Is it the dual vvt if it is can uyou flash BF programe into a BF F6,,have tryed this yet? CHEERS BB

←

Mate its a combination of things, Cams yes, unfortunatley the reason why the BF has been able to use the VCT is because of its PCM It uses a different one compared to the BA, so you cant just flash in the BF one :(.

again thanks guys

[BALLBREAKER]

  Xtreme F6 said:

  BALLBREAKER said:

  Xtreme F6 said:

I did a BF XR6T auto today for APC in Myaree, It was for an Older Gent who didnt want to increase boost past 8 psi at any point in the rev range.

Car had an APC dump, cat and twin 2.5 inch exhaust, F6 CAI and a K&N filter. It made 226 rwkw's before tune and was running 6 psi boost..

Running only 8 PSI was a weird request but one I did anyways. Was able to hold 8 psi from begining to 4500 rpm and then it went down to 6.5 all the way through to 6000 rpm... WOuld have been nice to be able to crank it up a little more but under request this was the max power asked for so I kept to that.

Attached graph.

←

Hi simmon,Why is the BF making so much power 246 WITH 8PSI id be very happy with that kind of boost,, great work as allways ,,that's still less boost than a stock BA F6. why can you explain .My car made 215 rwkw with 1800 ks. Is it the dual vvt if it is can uyou flash BF programe into a BF F6,,have tryed this yet? CHEERS BB

←

Mate its a combination of things, Cams yes, unfortunatley the reason why the BF has been able to use the VCT is because of its PCM It uses a different one compared to the BA, so you cant just flash in the BF one :(.

again thanks guys

←

thaks Simmon,keep up the hard work mate .CHEERS BB