gotxr6t Member 56 Member For: 19y 3m 1d Location: Sunshine Coast Posted 20/04/06 08:12 AM Share Posted 20/04/06 08:12 AM been a while since been on forum, came crawling back when I need help!!!!!!!!Got gauges ages ago and today finally thought that it is about time to put them in. Guess what I hate auto elecy work!!!!!!!!!! After losing the t piece for about 45 mins, (many words yelled and tools throwen.) Finished in engine bay then proceded to start on inside. How the hell do the plugs for the icc come undone. I have tried for ages and ages I pushed I poked and now I have thumbs that hurt like hell. I had the instructions on icc removal and install, but I just cant get plug no 1 to some out. HELP!!!!!!!!!!! Link to comment Share on other sites More sharing options...
Guest Guests Posted 20/04/06 08:31 AM Share Posted 20/04/06 08:31 AM Give this a crack mate,ICC RemovalAnything else? Darren Link to comment Share on other sites More sharing options...
urslow Resident golf buggy drift champion Donating Members 815 Member For: 19y 29d Location: Lismore NSW Posted 20/04/06 08:47 AM Share Posted 20/04/06 08:47 AM I didnt remove the ICC just pulled the top loose a bit then fed the wires to the back of the TC plug for illum and the cigga lighter for power.Dave Link to comment Share on other sites More sharing options...
gotxr6t Member 56 Member For: 19y 3m 1d Location: Sunshine Coast Posted 20/04/06 11:18 AM Author Share Posted 20/04/06 11:18 AM Thanks Darren but I have got those instructions already, it says where the wire clips are, but pushing on the lug and pulling down it just wont come out (stage 5 in instructions).Sorry urslow but what does TC stand for?Thanks for your input. Link to comment Share on other sites More sharing options...
XR68UZ XR68UZ Donating Members 732 Member For: 18y 10m 8d Location: Sydney Posted 20/04/06 11:21 AM Share Posted 20/04/06 11:21 AM traction control I assume Link to comment Share on other sites More sharing options...
ZAP No boost, no bottle, just my foot on the throttle! Lifetime Members 7,935 Member For: 20y 9m 3d Gender: Male Location: Sydney Posted 20/04/06 11:24 AM Share Posted 20/04/06 11:24 AM TC=Traction Control buttonYou do not need to remove the ICC to put gauges in. You can feed any wires or hoses from the top down. If you feed from the right and guide the wire towards the back of the car, the wires will be come down behind the foglight switch.I suggest you use some semi rigid wire chaser to get the hoses or wires to the top of the dash. I have a special wire chaser, but heavy gauge wire can do the same job.Good luck Link to comment Share on other sites More sharing options...
gotxr6t Member 56 Member For: 19y 3m 1d Location: Sunshine Coast Posted 20/04/06 12:25 PM Author Share Posted 20/04/06 12:25 PM Dont have tc (ute). and I have already ran wires through the bung on the passenger side, thanks every one for you input, the joys shall continue tomorrow. Link to comment Share on other sites More sharing options...
cobrav8 Member 1,969 Member For: 19y 7m 24d Gender: Male Location: New Zealand Posted 20/04/06 08:15 PM Share Posted 20/04/06 08:15 PM I ran my lines through the firewall like you, and removed the side panels besdie the ICC and ran the wires up there up to the top - didnt need to move the ICC at all. Link to comment Share on other sites More sharing options...
GOLDIE My new toy Lifetime Members 5,344 Member For: 21y 6m 26d Gender: Male Location: stanthorpe wine capital of qld. Posted 20/04/06 08:22 PM Share Posted 20/04/06 08:22 PM Taped to the wires going to the power socket is the light wires if you have a cig lighter I use these for the lights in the gauges and as has been said the mpower from the power socket wiring.Ian Link to comment Share on other sites More sharing options...
Kaine HgAg soldier Member 253 Member For: 21y 4m 4d Gender: Male Posted 21/04/06 11:00 AM Share Posted 21/04/06 11:00 AM how hard is it to get power from the cig lighter, can you access it by just taking the side panels off? I'm going to install mine tomorrow and I need a 12v source for the oil pressure gauge. should I be buying 'special' wire for the engine bay so it doesnt melt? Kaine Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now