Need Urgent Help, How Do I Dismantle The Deck?

[kawerx]

why would you pull out the deck to do that?

what you should do is run a hi-lo converter from one of the speaker wires.

I also have a ba ute and I used one of the rear speaker chanels to do this,but I think it works better if you use 2 chanels(twice the signal)maybe.

do you have prestige sound with the tweeters or only 4 speakers.

[shockF6]

if you want line level from the icc to power your amps, your best option is to call ASL logistics in melbourne as they do this mod.

I had a look myself before taking mine to them and beleive me the $220 they charge is far cheaper than having a go and killing your $2k+ icc unit

the cheaper option is to run a line level converter, just make sure you run it on almost no gain otherwise they sound like

[rushed6]

  kawerx said:

why would you pull out the deck to do that?

what you should do is run a hi-lo converter from one of the speaker wires.

I also have a ba ute and I used one of the rear speaker chanels to do this,but I think it works better if you use 2 chanels(twice the signal)maybe.

do you have prestige sound with the tweeters or only 4 speakers.

←

best advice I done the same easier as well

[Guest]

Check this out!!!!

Any problems, PM me.

Good luck.

ICC_removal.doc