XR06T Silver Donating Members 4,146 Member For: 19y 8m 4d Gender: Male Posted 29/03/06 01:08 PM Share Posted 29/03/06 01:08 PM the problem is it pops out of 2nd when letting the clutch out during decel..taking the plastic surround off seemed to make it a little better, blipping the throttle also helped but its still a pain in the ass.any clue as to what it may be?? Link to comment Share on other sites More sharing options...
Paradoxx Colossal Member Member 5,049 Member For: 20y 6m 2d Gender: Male Location: Perth, WA Posted 29/03/06 03:18 PM Share Posted 29/03/06 03:18 PM That would be VERY bizarre...Sounds like the selector is misaligned or something... I think a trip to the dealer is in order...................... AGAIN Link to comment Share on other sites More sharing options...
G6ET8U Playing with Sports Bikes... Silver Donating Members 1,927 Member For: 19y 3m 29d Gender: Male Location: Whistling, GTX. Posted 30/03/06 11:10 AM Share Posted 30/03/06 11:10 AM I had problems with gear selection but mine was 5th and the 'shifter block' was replaced under warranty...My shift felt VERY vague before hand, but after the warranty it felt alot more positive...If that makes sense... maybe you are experiencing something similar...Jack Link to comment Share on other sites More sharing options...
XR06T Silver Donating Members 4,146 Member For: 19y 8m 4d Gender: Male Posted 31/03/06 02:37 PM Author Share Posted 31/03/06 02:37 PM thanks for the responese guys..ps nice power figure xr6t8 U.. good luck with the t5! hope your tune isn't too brutal down low.. Link to comment Share on other sites More sharing options...
XR06T Silver Donating Members 4,146 Member For: 19y 8m 4d Gender: Male Posted 05/04/06 12:42 PM Author Share Posted 05/04/06 12:42 PM nother problem...wont slot into second or third sometimes when shifting at redline..the two issues related anyone think??how much for a t56?? Link to comment Share on other sites More sharing options...
Romulus Donating Members 1,279 Member For: 20y 1m 23d Location: Perth Posted 05/04/06 12:58 PM Share Posted 05/04/06 12:58 PM nother problem...wont slot into second or third sometimes when shifting at redline..the two issues related anyone think??how much for a t56??<{POST_SNAPBACK}>Clutch or syncro problem maybe? I'm not a mechanic, but mine does the same when shifting at hi rpm. I dropped the rev limiter to stop that from happening.Dunno if a T56 is the way to go - it depends on what your after. If you want to go drag racing then an auto would be a no brainer. If you like the control of shifting manually then a manual would be the better option.I like the manual, but my next purchase would be an auto. Link to comment Share on other sites More sharing options...
Paradoxx Colossal Member Member 5,049 Member For: 20y 6m 2d Gender: Male Location: Perth, WA Posted 05/04/06 11:52 PM Share Posted 05/04/06 11:52 PM I think our boy is a fan of drift work Kieran, shifting at high rpm will be difficult from the factory as mine was, also some gearboxes dont seem to like being shifted too quickly. Have you had a look at the oil? Get some good oil in there and see if it still happens. Any word on the not staying in gear problem? What has the dealer said? Link to comment Share on other sites More sharing options...
XR06T Silver Donating Members 4,146 Member For: 19y 8m 4d Gender: Male Posted 06/04/06 11:20 PM Author Share Posted 06/04/06 11:20 PM going into dealer today..I have tranzmax z in there so oil should be all good. only 15k old now.I think m6 might be right about the clutch, because another funny thing it does is squeak when you shift to fast..shift into 2nd and it'll chirp but all the other gears makes the clutch squeak. it sounds like one of those really ricer bov's, and is pretty loud.. does this indicate clutch problem?it makes the same noise if you shift into 2nd fast ish with the tc on too...thanks for the replys guys Link to comment Share on other sites More sharing options...
2fardown Member 526 Member For: 19y 9m 15d Gender: Male Location: Brisbane Posted 07/04/06 03:12 AM Share Posted 07/04/06 03:12 AM Had the same problem with my XH Longreach ute. Would pop out of second all the time and wouldn't shift at high rpm. This was AFTER a complete rebuild of the gearbox and a new clutch. Ended up getting a near new T5 box for $400... Problem solved.A friend of mine with an XR6 turbo ute had his T5 rebuilt by Mal Wood and it came back doing exactly that. He ended up selling the ute a month later..... Link to comment Share on other sites More sharing options...
TheJackal Member 6 Member For: 18y 10m 24d Posted 07/04/06 05:58 AM Share Posted 07/04/06 05:58 AM hey mate, got the exact prob in the t5 in my ef, I spoke to a trans place and he said its quite common with the t5, was somthing to do with a input shaft, I cant remember exactly though, I blip mine when goin down gears and it never does it. but really its part of the fun drivin a car with a t5 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now