Ss Induction Kit Any Good?

[cobrav8]

Good decision.

There is a thread on here somwhere (I tried searching and had no luck) that details exactly where to cut the airbox hole to fit the new intake. I did mine by looking at how it would work - and it was pretty easy, as long as you allow for the locator parts to line up with the ribs in the airbox.

SOmeone may be able to post a link to the thread with the instructions.

[stang]

Good decision.

There is a thread on here somwhere (I tried searching and had no luck) that details exactly where to cut the airbox hole to fit the new intake.  I did mine by looking at how it would work - and it was pretty easy, as long as you allow for the locator parts to line up with the ribs in the airbox.

SOmeone may be able to post a link to the thread with the instructions.

Cobrav8 and everybody else you will find Kaines thread on the Typhoon cai posted in the faq section in the modifications forum,great guy that he is he was nice enough to post itin there.(cobrtav8 this is not a go at you but an answer to our question)

I got the faq section added to the forum to help members have a place to put there mods so we wouldn`t have to go all over the forum looking for them.

But alas you can lead a horse to water but you can`t make it drink.

[cobrav8]

I thought the saying was "You can lead a horse to water, but you cant make it wear crutchless panties".

[stang]

I thought the saying was "You can lead a horse to water, but you cant make it wear crutchless panties".

is this horse male or female?

[cobrav8]

So - the link is....

http://www.fordxr6turbo.com/forum/index.ph...pic=17618&st=18

Post #29

I didnt see the FAQ section - good idea.

[Guest FatBAt]

hey mate,

I have the SS CAI. Works ok, I could notice the difference in sounds when backed off throttle when it was standard. Cheap quality plastic, and it starts to bend with the heat. Here's a pic I took recently.

<{POST_SNAPBACK}>

Apparently they come in 2 flavours. One for N/A and one for turbos. The latter is strenghtened for the extra heat. Or so I was told.

I have the crappy warped one in any case.

Cheers

[Robit28]

Piece of

I had one and it melted shut. Take it from me, spend $80 on a 2nd CAI from Ford......much better bang for buck.

Rob.

[DAVO61]

I have the one for the turbo and it is thicker and harder than the other and have had no probs with it.

[G6ET8U]

I have an SS Inductions in my car with a K&N, and I'm very happy with mine, at the one and only dyno day I've been to my car was dyno'd and made a best of 212.5rwkw (the other runs were 198rwkw and 207rwkw) and on the same day, same dyno only about 30 mins later another complete stocker XR6T including standared intake made 191rwkw, though I don't imagine that the SS alone makes the difference of 21rwkw but it has to amount something...

After I put it on I felt the car was 'freed' up a little more, it revved a bit easier and pulled harder as well...

Jack

[XRT8U]

Hey jack mines a SS induction just a little modified! All u can hear is air suncking when u accelerate meaning its working pretty well!