TUFED6 New Member 21 Member For: 19y 5m 27d Location: 160km/h wheelspin Posted 21/02/06 12:59 AM Share Posted 21/02/06 12:59 AM Heads up for everyone, I noticed that the paint had started to come off in a few places on my crossover pipe. I pulled the bugger off while I was chasing a boost leak (TB hose turned out to be the culprit, had a split in it).With it sitting on the bench, I hit it with the compressor to get some dust off it, and some big chunks of the black wrinkle paint came off too.The alarming part is that it seems to be painted on the inside, and the paint inside seems to be just as crap. Really would not want any of this sh*t finding its way into your motor.I think I'll be dropping mine in the cold tank and painting it again with a pressure pack...Is this a problem on all XR6T's, I think I read a thread about this a while ago, and it was something that Ford was replacing under warranty? (mine is out of warranty)... - John Link to comment Share on other sites More sharing options...
Paradoxx Colossal Member Member 5,049 Member For: 20y 3m 3d Gender: Male Location: Perth, WA Posted 21/02/06 01:20 AM Share Posted 21/02/06 01:20 AM I have heard of this happening to a few other people too. I didnt know about the paint on the inside too.. are you sure?? It could be devastating if chunks came off it and got drawn into the engine If you manage to re-spray it get some progress pics and show us how you do it, I'm interested to see how it turns out.High temp paint required yeh? Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 4d Gender: Male Location: Perth Posted 21/02/06 01:24 AM Share Posted 21/02/06 01:24 AM (edited) I tired to get mine replaced under waranty through Mcinerny Ford in WA and Kristian is usually the man when it comes to warranty issues and he told me it would be a struggle and he was right. Ford wouldnt cover it because although its a apperance issuse they dont warrant it because the item is part of the engine and not visible when the car is normally in use.i aslo cleaned all the paint out of the inside of mine because i was concerned about the paint entering the engine. Edited 21/02/06 01:25 AM by hiddeous Link to comment Share on other sites More sharing options...
Paradoxx Colossal Member Member 5,049 Member For: 20y 3m 3d Gender: Male Location: Perth, WA Posted 21/02/06 01:31 AM Share Posted 21/02/06 01:31 AM How'd you do it?I remember seeing a while ago someone painted ot chromed their crossover pipe??I wonder how it would go with a strip and polish? *BLING* Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 4d Gender: Male Location: Perth Posted 21/02/06 01:42 AM Share Posted 21/02/06 01:42 AM Little tiny brass wire brush and a wire buff on a die grinder. there wasnt a whole lot of paint and it was already abit flaky(a bit like the owner) so i cam off quite easily......as for polished crome.... my 2c Link to comment Share on other sites More sharing options...
sutty Mushroom Donating Members 799 Member For: 20y 6m 12d Gender: Male Location: THORNLANDS, QLD Posted 21/02/06 03:13 AM Share Posted 21/02/06 03:13 AM Not everyone's cup of tea, but WGAF, I like it. Link to comment Share on other sites More sharing options...
God666 Complete Bastard Donating Members 1,123 Member For: 20y 11m 23d Gender: Male Location: Sydney Posted 21/02/06 03:51 AM Share Posted 21/02/06 03:51 AM Not everyone's cup of tea, but WGAF, I like it.Is that a stock item polished? If it is, that is a damn fine job.Too much bling for my liking however, as you say DILLIGAF Link to comment Share on other sites More sharing options...
sutty Mushroom Donating Members 799 Member For: 20y 6m 12d Gender: Male Location: THORNLANDS, QLD Posted 21/02/06 04:03 AM Share Posted 21/02/06 04:03 AM Not everyone's cup of tea, but WGAF, I like it.Is that a stock item polished? If it is, that is a damn fine job.Too much bling for my liking however, as you say DILLIGAFYep...all the crap scraped off to the casting...copper plated...chrome dipped and polished.The rest of the pipework is mandrel bent stainless. Link to comment Share on other sites More sharing options...
5INFUL MASSIVE MEMBER Member 294 Member For: 19y 5m 14d Gender: Male Location: PERTH Posted 21/02/06 04:06 AM Share Posted 21/02/06 04:06 AM Too much bling for my liking<{POST_SNAPBACK}>No such thing is there Link to comment Share on other sites More sharing options...
ms700 Moderating Team 10,170 Member For: 21y 9m 27d Gender: Male Location: Sydney Posted 21/02/06 06:00 AM Share Posted 21/02/06 06:00 AM I tired to get mine replaced under waranty through Mcinerny Ford in WA and Kristian is usually the man when it comes to warranty issues and he told me it would be a struggle and he was right. Ford wouldnt cover it because although its a apperance issuse they dont warrant it because the item is part of the engine and not visible when the car is normally in use.<{POST_SNAPBACK}>Strange how Ford work.....I just had mine replaced under Ford new car warranty....... some win, most lose.A bit of consistency would be nice! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now