Jump to content

Engine Gave Out At Under 50k


mpvella

Recommended Posts

  • Member
  • Member For: 19y 11m 24d

I just found out that they didnt send out the turbo after the engine rebuild. mob said to. The "service technician" decided against it. I had to call the service manager and he agreed with me/them and sent out the turbo!

What happens to all those poor smoes who dont follow up and ask for numbers and make enquires themselves????

If I didnt the turbo would have been put back in as is with a high chance of having metal in it and going through tthis whole thing again? Ford never ceases to amaze me!

Link to comment
Share on other sites

  • Replies 31
  • Created
  • Last Reply

Top Posters In This Topic

  • Member
  • Member For: 19y 11m 24d
I have a series 1, xr6t with just under 50K on the clock and is a regular family car (no mods).

<{POST_SNAPBACK}>

Are you the original owner?

Have you had the car from new?

Where abouts you located?

tom

<{POST_SNAPBACK}>

yeh!

Yeh!

Sydney

Link to comment
Share on other sites

  • Moderating Team
  • Member For: 21y 9m 8d
  • Gender: Male
  • Location: Sydney

Something still smells off here......

If the engine let go with such ferocity as you have described (rod, top end as well), they wouldnt be getting it rebuilt, they would have ordered you a new long motor.

At least a new short because the bottom end would be stuffed after a rod departed.......

If metal has been sent through the whole engine, like you said, a new long would have been the only solution.

*sniff sniff* You smell that? :spit:

Link to comment
Share on other sites

  • Complete Bastard
  • Donating Members
  • Member For: 20y 11m 4d
  • Gender: Male
  • Location: Sydney
I was told about $16 grand for a new one by the service guy at ford, he obviously doesnt know what he is talking about! I was amazed, because I sourced an engine fully loaded that will handle up to 40 psi boost for around $4500.

40psi boost hey! Didn't happen to be a diesel did it?

and the Ford guy doesn't know what he is talking about.....

Not hanging sh*te on you and I don't doubt your story however, if you are going to give MOFO a hard time about their poor service and lousy facts, do just a little homework first.

Standard XR6T boost is about 6psi. Many guys run a lot higher however..... 40psi.... I don't even run that much pressure in my tyres!

Oh, and by the way, if your service comes from MOFO just north of the bridge in Sydney.... yep.... I believe every word you say :stirthepot:

Link to comment
Share on other sites

  • Flaccid Member
  • Donating Members
  • Member For: 21y 5m 18d
  • Gender: Male
  • Location: NOONAMAH, go figure.....
Quad cam 5.5lt twin turbo v12 Mercedes Benz long engine... $65,000... 350kw 1000Nm......STOCK.

huh?

Link to comment
Share on other sites

  • Member
  • Member For: 19y 2m 8d

I would be sending a fax to Ford's :shutit: "Customer Care" centre in Melbourne.

Just make sure you have all of your facts. When I complained about them "forgetting" to put the traction control on the car when it was built, (long story - dont ask :shutit: ) I managed to get the next 4 services free. Do the sums on that one.

Link to comment
Share on other sites

  • Moderating Team
  • Member For: 21y 9m 8d
  • Gender: Male
  • Location: Sydney
Quad cam 5.5lt twin turbo v12 Mercedes Benz long engine... $65,000... 350kw 1000Nm......STOCK.

<{POST_SNAPBACK}>

huh?

<{POST_SNAPBACK}>

I was thinking the same?

your point is:?

Link to comment
Share on other sites

  • god bless my kids
  • Member
  • Member For: 20y 6m 14d
  • Gender: Male
  • Location: claremont meadows, sydney

io would guess the service dept is castle hills

when I complaint to costumerdont care about problems with above I was granted 15oo dollar in mechandise

Edited by xrturb
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.



×
  • Create New...
'