Jump to content

WA Spotted & Chit Chat Thread


cunners

Recommended Posts

  • Donating Members
  • Member For: 11y 6m 3d
  • Gender: Male
  • Location: NOR Perth

Thought BOV stays in same place and you run longer supplied hose from intake elbow to BOV?

qgyyhiyhvqt9i4t3.jpg

Just rip the whole thing out and block holes with chair stoppers.....not needed apparently and get better flutter noise lol

Link to comment
Share on other sites

  • Donating Members
  • Member For: 11y 6m 3d
  • Gender: Male
  • Location: NOR Perth

Roger that. Obviously could just ask manufacturer, but doubt it will be cheap. I have NFI, but looks like standard hose from any auto shop (but I'll shut up and let someone smart confirm).

Think I have a Plaz one somewhere at home....I could maybe measure and give you dimensions? I'd sell you mine, but I'll probably need it later if I resell my kit in the future

Link to comment
Share on other sites

  • Sandtrap Motorsport
  • Donating Members
  • Member For: 16y 4d
  • Gender: Male
  • Location: Perth

righto, making a simple task painful to read.

go to Couplers during your travels, purchase the non-high-pressure rated hose (less layers, easier to put on) ... it's like sub $8.95 a metre if I recall

  • Like 2
Link to comment
Share on other sites

  • Get It To Wheelspin Uncontrolably Then Give It Another 5 Pounds
  • Cruise Control
  • Member For: 14y 1m 7d
  • Gender: Male
  • Location: Work

I have no BOV and only get flutter if I put my foot into it. Normal driving you would think mine is a n/a..... Infact, compared to everyone else on here mine seems like a n/a

You fitted that cooler yet Steve? Or to busy putting the house back together

  • Like 1
Link to comment
Share on other sites

  • Member
  • Member For: 11y 9m 2d
  • Gender: Male
  • Location: Perth

Too busy resting his balls on all your houses surfaces apparently?

Do the cooler together it'd be a *beep* to do alone, gotta hold up that big radiator support bar while you drill it etc

  • Like 1
Link to comment
Share on other sites

  • Moar Powar Babeh
  • Lifetime Members
  • Member For: 19y 2m 5d
  • Gender: Male
  • Location: Perth

Can anyone suggest what to use for BOV recirc line after changing to turbo side intake? The 25mm ID line that goes back to the intake pipe from BOV. Obviously it needs to be a fair bit longer than the stock rubber thing. Any help on where to get would also be great.

I've got a heap of surplus 25mm I'd silicone hose (blue hence surplus) or some 25mm id black rubber hose if that'll help?

Can throw it in the boot if your passing the airport in your travels tomorrow or Friday.

Link to comment
Share on other sites

  • Member
  • Member For: 11y 7m 7d

I've got a heap of surplus 25mm I'd silicone hose (blue hence surplus) or some 25mm id black rubber hose if that'll help?

Can throw it in the boot if your passing the airport in your travels tomorrow or Friday.

Done, black rubber is good.....old man spec LOL.

I'll PM you later.

Cheers.

Link to comment
Share on other sites

  • Manual mode ________________________ All day, erryday
  • Donating Members
  • Member For: 17y 4d
  • Gender: Male
  • Location: Probably above atmospheric pressure

I am thinking about finally blocking my BOV off after 7 years, after driving your stock F6 ute on that furniture run. Flutters easy as on stock boost! Mine's not stock, so could be a bit much though compared to yours though, which is stock.

Stock.

  • Like 2
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'