LazyBrennan Donating Members 683 Member For: 13y 8m 19d Gender: Male Location: Baldivis, Wait Ages. Posted 04/05/15 01:00 PM Share Posted 04/05/15 01:00 PM ^^^ XFT?How did you guess ? Link to comment Share on other sites More sharing options...
LazyBrennan Donating Members 683 Member For: 13y 8m 19d Gender: Male Location: Baldivis, Wait Ages. Posted 04/05/15 01:04 PM Share Posted 04/05/15 01:04 PM The most time consuming part is removing the collets and reinstalling them. They either fall in first time or take 10mins ea. Make sure you use some quality rag to cover the oil drain holes in the head so none escape. I'd strongly suggest you get a 1/4 drive battery powered impact driver to remove and install the tool retainer bolts and a rechargeable rattle gun or ratchet to run the press tool bolts down. Saves bulk time. Don't use a heavy air powered gun or you'll mash out the tool.Thanks for that mate! Will defiantly keep that in mind. I have a spare block all together on stands at home so I'll have to practise. I need a new air compressor. I can't imagine needing much air? Link to comment Share on other sites More sharing options...
TaHa Member 948 Member For: 16y 6m 19d Gender: Male Posted 04/05/15 03:59 PM Share Posted 04/05/15 03:59 PM Anyone know a shop with good prices on nolathane gear? Link to comment Share on other sites More sharing options...
GeGe6 Donating Members 1,978 Member For: 12y 5m 4d Gender: Male Location: Perth, SOR Posted 04/05/15 10:21 PM Share Posted 04/05/15 10:21 PM Car Mods Australia has 20% off whiteline regularly.Not sure how it stacks up in the end. Might be worth a try. Link to comment Share on other sites More sharing options...
GeGe6 Donating Members 1,978 Member For: 12y 5m 4d Gender: Male Location: Perth, SOR Posted 04/05/15 11:28 PM Share Posted 04/05/15 11:28 PM Car Mods Australia has 20% off whiteline regularly.Not sure how it stacks up in the end. Might be worth a try. Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 18d Gender: Male Location: Perth Posted 05/05/15 12:39 AM Share Posted 05/05/15 12:39 AM I have a good contact for super pro if you wanted to go that way Link to comment Share on other sites More sharing options...
TaHa Member 948 Member For: 16y 6m 19d Gender: Male Posted 05/05/15 02:38 AM Share Posted 05/05/15 02:38 AM (edited) It would be good to get a price from them also Luke. The reason I wanted nolathane is that they have the part that has the bushes already in it. (Complete new lower trail arm and front control arm)I need to get new: rear lower trail arm bushesFront control arm inner bushes LH and RHNew ball joint to front LHDo thet have control arm and the trail arms ready as a kit to install or just bushes? I dont have a 12 ton jack or what ever is required so that's the only thing holding me back from doing it Edited 05/05/15 02:49 AM by TaHa Link to comment Share on other sites More sharing options...
m1rkz Member 114 Member For: 12y 4d Gender: Male Location: Perth Posted 05/05/15 04:43 AM Share Posted 05/05/15 04:43 AM I gotta change out my washer fluid. Smells like complete ass. I think when xft topped it up either the chemical they put in has mixed poorly with what was in there or ita just water that has since gone poorly. Link to comment Share on other sites More sharing options...
GeGe6 Donating Members 1,978 Member For: 12y 5m 4d Gender: Male Location: Perth, SOR Posted 05/05/15 07:53 AM Share Posted 05/05/15 07:53 AM Just seen a classic.A car turning off Freeway North bound onto canning bridge towards Burswood.Did a 90 deg turn into bus station lane, smashing head on with a bus. 2 Link to comment Share on other sites More sharing options...
m1rkz Member 114 Member For: 12y 4d Gender: Male Location: Perth Posted 05/05/15 08:41 AM Share Posted 05/05/15 08:41 AM Lol nice one.Just spoke to an exhaust place regarding the centre muffler removal thing I was on about a while back. He was telling me that if u go cat back it wont require a tune or anything, again I thought it would do... can anyone confirm ? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now