Z2TT Member 714 Member For: 12y 6m 18d Posted 30/03/15 04:26 AM Share Posted 30/03/15 04:26 AM Hi Guys who in Perth does cheap tyre fitting and balancing, any small or home operators out there that you guys know? Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 20d Gender: Male Location: Probably above atmospheric pressure Posted 30/03/15 05:08 AM Share Posted 30/03/15 05:08 AM Achilles 123s are not true semis. More like semi semis.I've used RE55's (FG F6 ute, stock, skatey on them), R888's (FD RX7 - gripped well) and Pirelli P Corsa Zeros (slightly less soft, on FG XR8 - stuck like sh*t to a blanket, love them)HORY SHEETIt's TocchiYeah my 60 foot on my 11.9 was 2.09...not very good. Link to comment Share on other sites More sharing options...
Tocchi Sandtrap Motorsport Donating Members 2,055 Member For: 16y 20d Gender: Male Location: Perth Posted 30/03/15 02:11 PM Share Posted 30/03/15 02:11 PM A lazy launch at 10psi netted me a 1.23 60ft - step up your game Steve 1 Link to comment Share on other sites More sharing options...
Tocchi Sandtrap Motorsport Donating Members 2,055 Member For: 16y 20d Gender: Male Location: Perth Posted 30/03/15 02:23 PM Share Posted 30/03/15 02:23 PM (edited) Guys, you know of any BA BF XR6T factory piping & FMIC going dirt cheap?Picking up a daily BF wagon in a fortnight when I'm in Perth, and thinking I'll slap a BA/BF XR6T engine in it, run stock piping etc, and have 300hp for a cruiser. Was tempted to go FG motor but cbf dealing with the hassle of sumps & rocker change.If anybody knows of a BF turbo motor, full, up for grabs, at a decent price, let me know Would installing a BA engine into a BF cause dramas? Edited 30/03/15 02:24 PM by Tocchi Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 20d Gender: Male Location: Probably above atmospheric pressure Posted 30/03/15 03:08 PM Share Posted 30/03/15 03:08 PM (edited) You'll probably have to wait for Luke to wake up and read this BA engines are good for tens anyway! edit - not that I need to tell you that Mr 465rwkw hahaha Edited 30/03/15 03:09 PM by -Stever- Link to comment Share on other sites More sharing options...
Tocchi Sandtrap Motorsport Donating Members 2,055 Member For: 16y 20d Gender: Male Location: Perth Posted 30/03/15 08:50 PM Share Posted 30/03/15 08:50 PM * 510rwkw it was 680rwhp at 28psi with 5900rpm limiter through the glide/stall/9"/slicks Yeah I'll wait for Luke I'm unsure if BA DCVT hardware would conflict with BF DCVT software etc. Link to comment Share on other sites More sharing options...
PTR_NITRO_FG Donating Members 3,214 Member For: 11y 6m 19d Gender: Male Location: NOR Perth Posted 30/03/15 10:06 PM Share Posted 30/03/15 10:06 PM Wow.....Original Mummba right there! Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 21d Gender: Male Location: Perth Posted 31/03/15 01:35 AM Share Posted 31/03/15 01:35 AM No issues with a ba block/head in a BF....(ask me how I know) Link to comment Share on other sites More sharing options...
barnz Member 3,047 Member For: 11y 24d Gender: Male Location: Brisbane Posted 31/03/15 05:58 AM Share Posted 31/03/15 05:58 AM (edited) Coz some poor carnt on hear recently bought a 07 bf2 that ended up having a dirty old ba engine in it. The give away being the z9 filter it had.ORdidnt you swap your built ba engine into your bf phoon? Edited 31/03/15 06:01 AM by barnz Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 20d Gender: Male Location: Probably above atmospheric pressure Posted 31/03/15 06:37 AM Share Posted 31/03/15 06:37 AM * 510rwkw it was 680rwhp at 28psi with 5900rpm limiter through the glide/stall/9"/slicks Yeah I'll wait for Luke I'm unsure if BA DCVT hardware would conflict with BF DCVT software etc.Your signature sucks thenPics required of wagon skids once operational 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now