Z2TT Member 714 Member For: 12y 6m 18d Posted 22/03/15 02:06 PM Share Posted 22/03/15 02:06 PM (edited) Hi Guys does anybody know a workshop that is able to do custom length hydrualic hoses with all different types of fittings and fit them to a car, I need some power steering and oil cooler hoses custom made and fitted.Where should I go. Edited 22/03/15 02:12 PM by Z2TT Link to comment Share on other sites More sharing options...
kjoy064 Member 276 Member For: 17y 9m 1d Gender: Male Location: WA Posted 23/03/15 12:19 AM Share Posted 23/03/15 12:19 AM Well finished the car yesterday and after spending 9 hours on her including a proper clean on the wheels, under guards, suspension and brakes we're looking much better and was worth every bit of effort that's for sure. Service on Saturday and complete the inside. 4 Link to comment Share on other sites More sharing options...
AzMahoony Hench, but no longer shredded or tanned. Member 3,343 Member For: 17y 8m 16d Gender: Male Location: Canning Vale, W.A Posted 23/03/15 12:48 AM Share Posted 23/03/15 12:48 AM *drools* Link to comment Share on other sites More sharing options...
Krazy Kyle Get It To Wheelspin Uncontrolably Then Give It Another 5 Pounds Cruise Control 2,697 Member For: 14y 1m 23d Gender: Male Location: Work Posted 23/03/15 02:30 AM Share Posted 23/03/15 02:30 AM speaking of cleaning wheels.... You have that cleaning gear Mick? or does Brennan still have it? and the catch cans..... ive got all of April off so should organise a catch up. Plus ive still got that intake kit you can have. Link to comment Share on other sites More sharing options...
PTR_NITRO_FG Donating Members 3,214 Member For: 11y 6m 19d Gender: Male Location: NOR Perth Posted 23/03/15 02:40 AM Share Posted 23/03/15 02:40 AM Got my ADO8r rears put on this morning....thanks again to tukangbaso for mentioning the hook up!Only done 15kms so far, and can still spin the tyres pretty easily, but I'm assuming they will need a few hundred kms to get them 'worn in' and hopefully grip will be improvedVery honest and awesome dudes at Wheels & More Osborne Park (they don't like using that name but apparently need to be part of a franchise to obtain the distribution rights for Yokohama tyres)....they also fixed the f*ck up Fraud made when installing my Whiteline sway bars...will probably give them my business when I finally install the billys + kings....then suspension setup should be awesomesauce lol Link to comment Share on other sites More sharing options...
Lennox Member 2,586 Member For: 11y 9m 18d Gender: Male Location: Perth Posted 23/03/15 03:09 AM Share Posted 23/03/15 03:09 AM Let us know how they go in the rain, need something more grippy for mineAre they proper semi slicks? They need to be warmed up before they grip properly don't they? Link to comment Share on other sites More sharing options...
masda74 To Loud Gold Donating Members 4,112 Member For: 13y 14d Gender: Male Location: WA, Perth Posted 23/03/15 03:17 AM Share Posted 23/03/15 03:17 AM do a few burn outs to scrub them in.also take some pics of the treadwear. Link to comment Share on other sites More sharing options...
Krazy Kyle Get It To Wheelspin Uncontrolably Then Give It Another 5 Pounds Cruise Control 2,697 Member For: 14y 1m 23d Gender: Male Location: Work Posted 23/03/15 04:04 AM Share Posted 23/03/15 04:04 AM Only done 15kms so far, and can still spin the tyres pretty easily, but I'm assuming they will need a few hundred kms to get them 'worn in' and hopefully grip will be improvedInformation on breaking in tyresTires are comprised of many layers of rubber, steel and fabric. Due to these different components, your new tires require a break-in period to ensure that they deliver their normal ride quality and maximum performance. As tires are cured, a release lubricant is applied to prevent them from sticking in their mold. Some of the lubricant stays on the surface of your tires, reducing traction until it is worn away. Five hundred miles of easy acceleration, cornering and braking will allow the mold release lubricant to wear off, allowing the other tire components to begin working together. It is also important to note that your old tires probably had very little tread depth remaining when you felt it was time to replace them. As any autocrosser or racer who has tread rubber shaved off of his tires will tell you, low tread depth tires respond more quickly. Don't be surprised if your new tires are a little slower to respond (even if you use the exact same tire as before). Their new, full depth brings with it a little more tread squirm until they wear down.just a heads up for those interested 1 Link to comment Share on other sites More sharing options...
PTR_NITRO_FG Donating Members 3,214 Member For: 11y 6m 19d Gender: Male Location: NOR Perth Posted 23/03/15 04:15 AM Share Posted 23/03/15 04:15 AM (edited) Let us know how they go in the rain, need something more grippy for mineAre they proper semi slicks? They need to be warmed up before they grip properly don't they?Yeah that has always been my concern. The Goodyear EF1A2 are ridiculously good in the wet....but not expecting these to be anywhere near them. But when speaking to the boss dude, he rekons they are still good in the wet. Although each persons interpretation of 'good' can differ significantly lolAnd they are not a proper semi slick. They are advertised as road tyres that can be used at the track....(so somewhere in between road and track tyres). 180 treadwear ....so if I can get 10-15,000kms I'll be happy with that (another seller said he had customers get 20,000kms+ but no doubt those cars were not heavy cars like ours). do a few burn outs to scrub them in.also take some pics of the treadwear.LOL....nah, I'm gunna try and let it do its thing naturally. I'm sure they will get better after a few hundred kms. Treadwear pattern is this: (same rims even except mine are a gunmetal grey type of colour) Information on breaking in tyresjust a heads up for those interestedThanks for the tip! I might follow these directions and try not to go too hardcore in the beginning lol Edited 23/03/15 04:18 AM by PTR_NITRO_FG Link to comment Share on other sites More sharing options...
Krazy Kyle Get It To Wheelspin Uncontrolably Then Give It Another 5 Pounds Cruise Control 2,697 Member For: 14y 1m 23d Gender: Male Location: Work Posted 23/03/15 04:46 AM Share Posted 23/03/15 04:46 AM if I could find some 19" rims id be giving these a shot on the fronthttp://www.ebay.com.au/itm/245-40-19-2454019-98Y-PIRELLI-PZERO-SILVER-ULTRA-HIGH-PERFORMANCE-TYRES-NEW-/321686861599?pt=LH_DefaultDomain_15&hash=item4ae607f71f Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now