Jump to content

WA Spotted & Chit Chat Thread


cunners

Recommended Posts

  • Manual mode ________________________ All day, erryday
  • Donating Members
  • Member For: 17y 18d
  • Gender: Male
  • Location: Probably above atmospheric pressure

The ATR Sport2s are awesome value, and were OK in the wet until I'd worn them out with too many skids. They've had a very hard life.

245/40/18 for like $179 fitted each.

Changing to Invos for Racewars. Need full grip in acceleration and braking as well this year now the gearbox is rebuilt and I have bigger stoppers. 1000m of WOT and 500m braking distance is the plan. At $234 each before fitting they will be worth it

"U R SOUL" Plates on a mid 2000's Jag. I giggled.

Have seen that on Reid Hwy a couple of years ago. Also giggled once I said it a couple times.

Link to comment
Share on other sites

  • New Member
  • Member For: 9y 11m 12d

I've the nexen nfera su1 reslly good in the dry only had it about a month so can't tell on wet yet. Looks like a nicr soft compound. In my opinion grips better than the federal 595 evos I had on it before but the 595s were just under 50% when I first got it. Cost $180 each from memory for 245 40 18 wasnt much more for 19s

  • Like 1
Link to comment
Share on other sites

  • Member
  • Member For: 11y 23d
  • Gender: Male
  • Location: Brisbane

Get some nexen 6000 , good grip , cheap and quiet and about 175 each fitted. I put 4 on sues BF XR6. I use west state tyres Bentley. mazzis Z1 are noisy

Or try the new nexen N fera SU 1 or what ever its called. They are suppose to be great

looks like they are pretty cheap

http://www.ebay.com.au/itm/245-35R19-93Y-Nexen-NFera-SU1-Tyres-Melbourne-National-Freight-QUIET-GRIPPY-/161616972171?pt=LH_DefaultDomain_15&hash=item25a11f498b

.....

I used them a few times when I had 19's, really rate them for same reason ad arron. Grip is really surprising for the dollar

Can get the N6000 F&B for $154. Who here has used them?

Link to comment
Share on other sites

  • Member
  • Member For: 13y 10m 12d

Hey guys, Sorry to jump in on the topic at hand but I'm in need of a bit of help from a Local Perth member.

I'm attempting to get a tail shaft made by Phil at Final Drive and we've hit a speed bump - He needs to measure my tail shaft to ensure he manufactures the new one spot on.

The issue - I live in Adelaide.

So if anyone with a 2009 FG F6 MANUAL is in WA and wants a free carton - can you get back to me either on here or email - adamonline AT adam DOT com DOT au

That would be really appreciated. All Phil needs to do is measure it - so up on a hoist for a few minutes and that's it.

It would also be preferable if someone with the same car AND a 4" nizpro system was handy - as I'm paranoid about clearance issues.

Thanks guys, I appreciate it.

(I'll be in Perth April 20th-23rd for work)

Edited by Knackers
Link to comment
Share on other sites

  • Get It To Wheelspin Uncontrolably Then Give It Another 5 Pounds
  • Cruise Control
  • Member For: 14y 1m 22d
  • Gender: Male
  • Location: Work

Brake change time

The comparison

JR9p1u2.jpg

the process

d9VkTC9.jpg

The result

m4q5YhG.jpg

pretty happy so far. no more squeal or shudder

  • Like 4
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'