AzMahoony Hench, but no longer shredded or tanned. Member 3,343 Member For: 17y 7m 19d Gender: Male Location: Canning Vale, W.A Posted 05/08/14 11:15 AM Share Posted 05/08/14 11:15 AM ahhh mate your cars gonna piss in 280rwkw, is it a MK1 or 2? I was making 318 with the same mods except I had a gutted cat. (BFII) Link to comment Share on other sites More sharing options...
PTR_NITRO_FG Donating Members 3,214 Member For: 11y 5m 22d Gender: Male Location: NOR Perth Posted 05/08/14 11:35 AM Share Posted 05/08/14 11:35 AM It's a BF btw.Oh yeah...my bad...you're prob right cause don't know much about b series At least if you make more it will be a pleasant surprise lolJust wait for pads to bed in then re bleed brakes again.This made a Hugh difference in pedal feel for me, and is now spot on.Also what brake fluid you use?Cheers Mick! That's a relief...it actually started gripping a little better on the way home, so I'm sure you're right how long after til new flush? Cause they did a full flush apparently...but I will re-do and hopefully be even better..And I just went with their stupid recommendation for fluid (so unknown but prob cheap stuff)...even though I knew I should have gone something decent...but apparently according to them "all dot 4 fluid is basically the same" lol At least when I do another flush I'm only wasting cheaper stuff (more than likely anyways). I was thinking I should just stick to nulon...if their oil is good...hopefully their other products are too? Or should I just go super stuff? Like the castrol one or penrite or something? What did you use? Link to comment Share on other sites More sharing options...
RB Snake Donating Members 327 Member For: 10y 10m 25d Gender: Male Location: Perth SOR Posted 05/08/14 11:57 AM Share Posted 05/08/14 11:57 AM ahhh mate your cars gonna piss in 280rwkw, is it a MK1 or 2? I was making 318 with the same mods except I had a gutted cat. (BFII)It's a BFII 2008 model. So it has the typhoon bottom end and whatever else they improved with it. Good to know you made over 300, I would have thought they need to mod the turbo at that level. 1 Link to comment Share on other sites More sharing options...
PTR_NITRO_FG Donating Members 3,214 Member For: 11y 5m 22d Gender: Male Location: NOR Perth Posted 05/08/14 12:22 PM Share Posted 05/08/14 12:22 PM Aren't gt3582 good for close to 400rwkw? Only rear port mod required once dump is done? 2 Link to comment Share on other sites More sharing options...
XtRmn8 570Nm @1800rpm Donating Members 2,441 Member For: 21y 1m 26d Gender: Male Location: Perth, WA Posted 05/08/14 12:56 PM Share Posted 05/08/14 12:56 PM It's a BFII 2008 model. So it has the typhoon bottom end and whatever else they improved with it. Good to know you made over 300, I would have thought they need to mod the turbo at that level.The only reason they said 280rwkw is because your valve springs and/or stock actuator will probably hold you back from making any more. Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 16y 11m 23d Gender: Male Location: Probably above atmospheric pressure Posted 05/08/14 01:42 PM Share Posted 05/08/14 01:42 PM Just a comment that my brakes backing plate was clearly audible squealing, like a sharp piece of metal chalk being dragged across an iron blackboard Link to comment Share on other sites More sharing options...
PTR_NITRO_FG Donating Members 3,214 Member For: 11y 5m 22d Gender: Male Location: NOR Perth Posted 05/08/14 10:59 PM Share Posted 05/08/14 10:59 PM Thanks Steve!Yeah...the noise is like a very fast ticking...pretty bs if all RDA's do it (even new design ones).Cause on the other forum...in a build thread they were commenting that their RDA's are making "insect" noises lol and I was just hoping it was old rotors or something...I tried to get a recording last night along the freeway...I think you cam just hear it when volume is cranked up...I will try to upload itShould I create an imgur account or photobucket or something? Or can I just upload straight onto this website via full version? Link to comment Share on other sites More sharing options...
masda74 To Loud Gold Donating Members 4,112 Member For: 12y 11m 17d Gender: Male Location: WA, Perth Posted 06/08/14 01:20 AM Share Posted 06/08/14 01:20 AM Steve, was that you at skippers last night at about 5:30pm? Why run away from me dammit............... 1 Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 16y 11m 23d Gender: Male Location: Probably above atmospheric pressure Posted 06/08/14 05:05 AM Share Posted 06/08/14 05:05 AM Ha sure was!! I was looking for the intercooler in the front of the car but thought you were NA as yours must be black. Also noticed the 50th wheels that I like so much...didn't pay attention to the driver though hahahaWas hoping to see how well the sunburst FG would keep with me around the roundabout but I think you turned off Link to comment Share on other sites More sharing options...
masda74 To Loud Gold Donating Members 4,112 Member For: 12y 11m 17d Gender: Male Location: WA, Perth Posted 06/08/14 05:45 AM Share Posted 06/08/14 05:45 AM I am pretty sure that I don't have the 50th anniversary wheels. I could be wrong. I wanted to keep up, but the daughter was in the car as well. So was my best mate. Can't risk their lives like that.Didn't you see the lights flashing a few times you noggin. What, did you think I was a cop??The intercooler is black. there is a reason for it. it is called a SLEEPER. Yes I turned off as I took a side road to avoid the lights.I would have turned left at the lights and you turned right.Anyways, a belated HELLO!!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now