Boganspeed Will do skids for food Silver Donating Members 1,177 Member For: 13y 12d Gender: Male Location: Perth SOR Posted 02/08/14 03:52 AM Share Posted 02/08/14 03:52 AM Got a few things on today.Gotta pick up the Lucky Strike bike from the painter this arvo.Fuel tank is painted to match the rest of the paint scheme and getting cleared today so it'll go into the oven tonight and I hope to collect it first thing tomorrow so I can reassemble the bike here.I used Devcon Flexane 80 liquid urethane on the drag bike seat just now.I just need to let it go off a bit and can then reposition the seat, mix up some more and do the rest.Dodgy colour is due to a purplish flouro light (Steve)I also want to service and wash the Harley today.Finally, if I can be bothered, my ute is embarrassingly filthy So I really should give that a good clean too. Link to comment Share on other sites More sharing options...
Lennox Member 2,586 Member For: 11y 8m 21d Gender: Male Location: Perth Posted 02/08/14 04:31 AM Share Posted 02/08/14 04:31 AM Maybe they wont let me backhttp://vid1135.photobucket.com/albums/m632/arronm7/DSCF9460_zps79ae50b1.mp4U shoulda seen that guy j0sh in the last one we did. He was doing huge powerskids down the straights and they told him to park up. Hahaha 2 Link to comment Share on other sites More sharing options...
GeGe6 Donating Members 1,978 Member For: 12y 4m 9d Gender: Male Location: Perth, SOR Posted 02/08/14 08:55 AM Share Posted 02/08/14 08:55 AM 15% off slotted DBA rotors at Super cheap. Link to comment Share on other sites More sharing options...
XtRmn8 570Nm @1800rpm Donating Members 2,441 Member For: 21y 1m 26d Gender: Male Location: Perth, WA Posted 02/08/14 08:58 AM Share Posted 02/08/14 08:58 AM 15% off slotted DBA rotors at Super cheap.If Supercheap prices are anything like the were 12 months ago, it would still be cheaper buying from these guys: http://stores.ebay.com.au/Vic-Performance-Parts/_i.html?_nkw=fg&_armrs=1&_from=&_ipg= 1 Link to comment Share on other sites More sharing options...
XtRmn8 570Nm @1800rpm Donating Members 2,441 Member For: 21y 1m 26d Gender: Male Location: Perth, WA Posted 02/08/14 11:22 AM Share Posted 02/08/14 11:22 AM If any WA members are after some genuine 19" Ford wheels, I have a set of FG luxury pack wheels and tyres that I have no use for any more.Wheels are immaculate apart from one small scratch on one. Rears tyres about 25% life left and front about 50% life left so they are ok.This is them on my car about 18 months ago.... 1 Link to comment Share on other sites More sharing options...
RB Snake Donating Members 327 Member For: 10y 10m 25d Gender: Male Location: Perth SOR Posted 05/08/14 08:51 AM Share Posted 05/08/14 08:51 AM Custom dyno tuneXcal 4 flash tunerPre dyno inspectionDyno print out1000cc injectorsRe-gap spark plugsCooler thermostatSupply and fit stage 2 Process West intercooler kit, Venom hi-flow cat sectionand upgraded Walbro 255lph in-tank fuel pump Gonna get it all done in September, can you guys think of anything else that should be done? I was quoted just under 5k for this, looking for 280rwkw. 1 Link to comment Share on other sites More sharing options...
PTR_NITRO_FG Donating Members 3,214 Member For: 11y 5m 22d Gender: Male Location: NOR Perth Posted 05/08/14 09:37 AM Share Posted 05/08/14 09:37 AM ^^^ 280rwkw ???? I would want at least 300 for that package....maybe 310ish? I'm hoping to crack 300 (or 290-295) with same as above but with f6 cooler.... I love me my heatsoak Is that MT or XFT? Link to comment Share on other sites More sharing options...
PTR_NITRO_FG Donating Members 3,214 Member For: 11y 5m 22d Gender: Male Location: NOR Perth Posted 05/08/14 09:50 AM Share Posted 05/08/14 09:50 AM Also side note question for anyone with braided lines.....I just got new pads, rotors, rebuilt calipers and braided lines....when I first got them back, they felt pretty average TBH (maybe marginally better than OEM).....and today they are starting to feel a little better.But is it supposed to be a super firm brake pedal, or was that just wishful thinking? I thought it would be way less travel, but its kinda similar to OEM and feels a little spongey Its just standard turbo front and territory rears, bremtec pads and sh!tty RDA rotors (arronm....I was warned in another thread of a ticking/insect noise from RDA's, and I think I hear something at moderate speeds/freeway speeds...sort of like a buzzing and not sure if its something like SteveR with the backing plate not being trimmed enough - but its only super noticeable on freeway next to 'walls'....but here's hoping its all in my head and that it goes away - although probably with my luck it will just get louder lol) Anyways.....I'm not sure if everything will start to feel better after a while (I'm hoping this); or possibly the shonky blokes didn't bleed the system properly?Anyone without brembos have braided lines and can comment??? Cheers! 1 Link to comment Share on other sites More sharing options...
RB Snake Donating Members 327 Member For: 10y 10m 25d Gender: Male Location: Perth SOR Posted 05/08/14 11:04 AM Share Posted 05/08/14 11:04 AM That's with MT, yeah it probably should hit above 280, but to achieve 280 all of those mods are req'd anyway. It's a BF btw. And the intercooler will be in black, like on Masdas car. I want it to look stock. 1 Link to comment Share on other sites More sharing options...
GeGe6 Donating Members 1,978 Member For: 12y 4m 9d Gender: Male Location: Perth, SOR Posted 05/08/14 11:12 AM Share Posted 05/08/14 11:12 AM Also side note question for anyone with braided lines.....I just got new pads, rotors, rebuilt calipers and braided lines....when I first got them back, they felt pretty average TBH (maybe marginally better than OEM).....and today they are starting to feel a little better.But is it supposed to be a super firm brake pedal, or was that just wishful thinking? I thought it would be way less travel, but its kinda similar to OEM and feels a little spongey Its just standard turbo front and territory rears, bremtec pads and sh!tty RDA rotors (arronm....I was warned in another thread of a ticking/insect noise from RDA's, and I think I hear something at moderate speeds/freeway speeds...sort of like a buzzing and not sure if its something like SteveR with the backing plate not being trimmed enough - but its only super noticeable on freeway next to 'walls'....but here's hoping its all in my head and that it goes away - although probably with my luck it will just get louder lol) Anyways.....I'm not sure if everything will start to feel better after a while (I'm hoping this); or possibly the shonky blokes didn't bleed the system properly?Anyone without brembos have braided lines and can comment??? Cheers! Yeh Pete, same set up but fronts being 325mm.Just wait for pads to bed in then re bleed brakes again.This made a Hugh difference in pedal feel for me, and is now spot on.Also what brake fluid you use? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now