Jump to content

WA Spotted & Chit Chat Thread


cunners

Recommended Posts

  • Member
  • Member For: 10y 9m 17d

Also im looking for a fg diff hat broken or in good condition to burrow as have a mate that's going to start building bullet alloy ones anyone able to help out message me for more details

Sent from my GT-I9305T using Tapatalk

Link to comment
Share on other sites

  • Member
  • Member For: 11y 4m 11d
  • Gender: Male

with 1 degree diff in camber can be 2 thing there align machine might had a calibration or was your car jack up aswell before it went on the machine

it only .5 to 1cm leaning out if you took your car back now you would fine it will give you a diff reading give or take 1/2 to 1/4 of a degree

Link to comment
Share on other sites

  • Moar Powar Babeh
  • Lifetime Members
  • Member For: 19y 1m 20d
  • Gender: Male
  • Location: Perth

is caster adjustable from factory?

actually, looking at those figures properly, bit of a difference in factory settings between the BF and FG (or possible because of ride height as well)....

Yep shims

Yeah shims, removing a shim front and adding it to the rear decreases the castor angle, rear to front increases it etc. Adjustments to castor don't affect the camber angle.

Link to comment
Share on other sites

  • To Loud
  • Gold Donating Members
  • Member For: 12y 11m 13d
  • Gender: Male
  • Location: WA, Perth

Krazy Kyle, how did you mount the gopro to the car? Did you get the helmut mount?

They are on special at BigW and so are the helmut mounts. What is the difference between the black and the white edition?

Link to comment
Share on other sites

  • All stock bar the k&n panel filter
  • Silver Donating Members
  • Member For: 12y 7m 30d
  • Gender: Male
  • Location: Perth

Black edition is where it's at Marco! Better frame rates at the higher resolution settings than the white edition. Plus I'm not sure if the current white editions have the built in Wi-Fi or not? Very handy feature!

Also, you can get a proper gopro suction mount that sticks to windows, motorbike tanks, car body panels etc.

Edited by dowen
Link to comment
Share on other sites

  • Get It To Wheelspin Uncontrolably Then Give It Another 5 Pounds
  • Cruise Control
  • Member For: 14y 22d
  • Gender: Male
  • Location: Work

yeah, what Dowen said. black is the best, ive got 2 silvers (hero 3 and hero 3+). white are still ok, but its really worth spending the extra few bucks on the better ones.

I only use the helmet mounts for motocross, ive got suction cup mounts for using on my car.

this was video from a cruise a few months ago... little boring but gives u an idea. 4:30 mark I mounted the camera behind the wheel, and id trust it to stay on, they suck on pretty well. ignore the wind noise, I used the wrong back cover. the sticky mounts are ok if u dont want them to come off. ever....

Link to comment
Share on other sites

  • Manual mode ________________________ All day, erryday
  • Donating Members
  • Member For: 16y 11m 19d
  • Gender: Male
  • Location: Probably above atmospheric pressure

Pics of sticky mount?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'