Jump to content

WA Spotted & Chit Chat Thread


cunners

Recommended Posts

  • Member
  • Member For: 11y 11m 17d

Get a decent set of scales and make sure draw bar weight is 10/15% of the total and less than the max allowable for the towbar set. That should make it tow nicely and stop the car dragging it's bum all the way there and back

where would one find a set of scales like that!

(and how far in would I have to reach to fund them)

running dual axle, and will make sure the load is moved to level it out, but if I want to play by numbers... ?

would have to weigh trailer, with a separate scale under the jockey/hitch?

only weigh bridge I know of is in Guilford too.

re the video. yeah, pretty exciting stuff. cant wait for 90 mile straight /sarcasm.

going to shoot of a pic every 5 seconds, should come out to about 15 minutes of footage at 30fps.

Link to comment
Share on other sites

  • Get It To Wheelspin Uncontrolably Then Give It Another 5 Pounds
  • Cruise Control
  • Member For: 14y 21d
  • Gender: Male
  • Location: Work

by memory that one was 1 pic a second. I also did a 3 second time laps. think it was a bit jittery. in the process of uploading it. gives u an idea

:edit: - ok so that's taking too long. photo update instead

the 90 mile straight you speak of

IFCb4T1.jpg

this is how the 90 mile straight was spent

QJgl8L8.jpg

such straight, much boredom, wow

A1JYq25.jpg

the bit that gets close to the water

lnPZOCX.jpg

actually gets a bit fun in the adelaide hills section.

Ew0LTaO.jpg

Edited by Krazy Kyle
Link to comment
Share on other sites

  • Member
  • Member For: 11y 11m 17d

Yeah.

Trailer defeats fun like paper beats rock.

You know that rock could tear the paper apart, but rules are rules, and you have to play by them

Sad panda.

Thinking caiguna, augusta, Melbourne.

OR smash a 15 hour day to eucla/border town, then I have no idea, but relaxes day 2 and 3.

Link to comment
Share on other sites

  • Get It To Wheelspin Uncontrolably Then Give It Another 5 Pounds
  • Cruise Control
  • Member For: 14y 21d
  • Gender: Male
  • Location: Work

on my return trip I drove from Port Augusta to Perth.... 2300kms in one hit.... Roxi drove for 5 hours of it. took me 21 hours. dont do the maths.....

Edited by Krazy Kyle
Link to comment
Share on other sites

  • Manual mode ________________________ All day, erryday
  • Donating Members
  • Member For: 16y 11m 18d
  • Gender: Male
  • Location: Probably above atmospheric pressure

Augusta man, Augusta!

Link to comment
Share on other sites

  • To Loud
  • Gold Donating Members
  • Member For: 12y 11m 12d
  • Gender: Male
  • Location: WA, Perth

Anyone looking for brakes.


I don't have the cash otherwise I would have snapped this up. :rant2:



http://www.gumtree.com.au/s-ad/warnbro/brakes-suspension/brembo-front-calipers-and-brake-pads/1036950677


I am assuming that this would fit our fords....

Link to comment
Share on other sites

  • 570Nm @1800rpm
  • Donating Members
  • Member For: 21y 1m 21d
  • Gender: Male
  • Location: Perth, WA

^^^^

Having a quick look at the pictures in I am 99% confident that they are not the same front 4 piston caliper as fitted to FPVs. There are a heap of different 4 piston Brembo calipers and I would not be taking a gamble with them as they could be a waste of time an money. By the time you by the correct mounting brackets and lines these would cost a bucket load. I am sure you could make them fit with a custom make bracket but for $800 for caliper alone I would not bother.

I may have a full Brembo 4 pot and large rear PBR caliper kit with DBA T3 rotors and braided lines for sale in the not to distant future if any of you are looking for a brake kit for an FG.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'