Lennox Member 2,586 Member For: 11y 8m 28d Gender: Male Location: Perth Posted 16/01/14 01:29 PM Share Posted 16/01/14 01:29 PM What'd you get before tune, have you been? My best is 13.03 I must get into the 12s stock!!! 1 Link to comment Share on other sites More sharing options...
masda74 To Loud Gold Donating Members 4,112 Member For: 12y 11m 23d Gender: Male Location: WA, Perth Posted 16/01/14 01:36 PM Share Posted 16/01/14 01:36 PM Nah mate, never went down with the xr6t. Have no interest in going down to the motorplex. I know that if I do go, murphy's law will dictate that something will break and I will have to get towed home.I went down to the motorplex back in the day with my cbr954 and did a pb of 11.04s.My wife works on wednesday and fridays, which rules out any chance of making WAW. Link to comment Share on other sites More sharing options...
.Stripes. All stock bar the k&n panel filter Silver Donating Members 8,061 Member For: 12y 8m 10d Gender: Male Location: Perth Posted 16/01/14 01:46 PM Share Posted 16/01/14 01:46 PM (edited) I was wondering what Steve was on about until I read the above post lol.IF Dowen was doing 11 sec passes, imagine what my car would be doing now, especially after the tune.I wish my car could do 11's :-( or at least stop costing me money for now...that would be fine too! Edited 16/01/14 01:46 PM by dowen Link to comment Share on other sites More sharing options...
masda74 To Loud Gold Donating Members 4,112 Member For: 12y 11m 23d Gender: Male Location: WA, Perth Posted 17/01/14 12:41 AM Share Posted 17/01/14 12:41 AM Well give us an update now that you have spent some coinage on the car.How is that Clutch going mofo? still running it in or have you kicked it a few times already?How does it feel? Link to comment Share on other sites More sharing options...
AzMahoony Hench, but no longer shredded or tanned. Member 3,343 Member For: 17y 7m 26d Gender: Male Location: Canning Vale, W.A Posted 17/01/14 12:50 AM Share Posted 17/01/14 12:50 AM (edited) You blokes can stick your manuals and your diff blowouts up your arse. Edited 17/01/14 12:51 AM by turboboink Link to comment Share on other sites More sharing options...
.Stripes. All stock bar the k&n panel filter Silver Donating Members 8,061 Member For: 12y 8m 10d Gender: Male Location: Perth Posted 17/01/14 12:53 AM Share Posted 17/01/14 12:53 AM (edited) Have to run it in for 600-800kms Tim reckoned. Feels good, initially felt heavy but I'd say that's more because my old clutch had gone light and the release point is much closer to the floor with this clutch. Easy to live with and has plenty of bite. No clutch kicks yet.Turns out that clunk when you put it into gear is still there, Tim reckons it's coming from the actual diff, says it's play where the halfshafts fit up. It only started doing that after I'd done some burnouts after having the truetrac fitted...It does still have the run-in oil still in it though, so Tim is suggesting we might try putting in some Redline Shockproof heavy gear oil to see if it makes it any quieter... Edited 17/01/14 12:54 AM by dowen Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m Gender: Male Location: Perth Posted 17/01/14 12:56 AM Share Posted 17/01/14 12:56 AM I could say something along the lines of I told you so but I won't... Did you go for the opt 5? Link to comment Share on other sites More sharing options...
.Stripes. All stock bar the k&n panel filter Silver Donating Members 8,061 Member For: 12y 8m 10d Gender: Male Location: Perth Posted 17/01/14 01:06 AM Share Posted 17/01/14 01:06 AM (edited) Haha I knew that was coming from you Luke! You were right. I find it interesting that after I had the diff rebuilt with the truetrac it was quiet, but then started doing it after I'd done a few burnouts (on private property, of course)...could I have f#cked something in the diff by being too hard on it too early? Or possibly just the crappy oil they used for the run-in period...which is still in there?After having a good chat with Tim Slako about it I ended up sticking with the option 3+ in the end. As you said, both are great clutches and Tim was convinced the option 5 would be overkill for my application, as well as needing a couple weeks or so to have one built. Plus I'm going snowboarding in Japan in 2 weeks, so the extra money will help with that. Edited 17/01/14 01:06 AM by dowen Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m Gender: Male Location: Perth Posted 17/01/14 01:10 AM Share Posted 17/01/14 01:10 AM Dollar to Doughnuts in a lowered manual car axle CV's would be my first point of call for drive line clunk.LH inner specifically. It on the pointy end of the shortest axle so copes the biggest alignment change when lowering the car.IMHO order to chance down the clunkLH Inner CVRH Inner CVLH Outer CVRH Outer CvDiff input CV Link to comment Share on other sites More sharing options...
IH8TOADS Silver Donating Members 3,618 Member For: 19y 4m 15d Gender: Male Location: OZ Posted 17/01/14 01:18 AM Share Posted 17/01/14 01:18 AM Tim did the Truetrac and the 1400hp shafts in my sedan also. I have has the thud into gear from day dot with the new diff also and it won't be burnout related. He told me he put redline 140 weight in straight up and never mentioned a run in oilI'm heading to Hakuba on the 16th Feb and then Niseko a week after that....what's your travel plans Dowen? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now