arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 26d Gender: Male Location: Perth Posted 14/11/13 12:18 AM Share Posted 14/11/13 12:18 AM Cheers for the reply, didnt get PM. Got a 1 inch drive rattle gun which has 3/4 adapter. The ebay sites say its 35mm. I measured it and I think its 35mm. Would be sweet if you could hook me up with a few sockets maybe its 1 3/8 or could be 36mm. I was going to just rattle it back on. My torque wrench only goes to 150nm and it needs 300. If I can load some gear I will beer you up. I can pickup. Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 1m 29d Gender: Male Location: Perth Posted 14/11/13 12:29 AM Share Posted 14/11/13 12:29 AM PM'd you again, let me know if it doesnt come through Link to comment Share on other sites More sharing options...
IH8TOADS Silver Donating Members 3,618 Member For: 19y 4m 14d Gender: Male Location: OZ Posted 14/11/13 04:36 AM Share Posted 14/11/13 04:36 AM I'm pretty sure I used a 36mm. I torqued the first ford assembly to spec and it failed after a while. I got a mate to help with the second one (same drivers side bearing) and he tightened the f**k out of it and no issues yet! He used to service ford taxi's at the airport so trust his experience. 1 Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 26d Gender: Male Location: Perth Posted 14/11/13 05:03 AM Share Posted 14/11/13 05:03 AM I reckon with the 1 inch drive rattle gun I have, if I do it up tight the whole car may spin around. 2 Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 16y 11m 28d Gender: Male Location: Probably above atmospheric pressure Posted 14/11/13 05:12 AM Share Posted 14/11/13 05:12 AM I watched one of the lads at XFT tighten mine the first time they failed...just about lifted himself off the ground to do that nut to 300Nm hahaha. Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 1m 29d Gender: Male Location: Perth Posted 14/11/13 05:23 AM Share Posted 14/11/13 05:23 AM Puny chicken winged lightwieghts. 300nm is only 220ftlb's Thats a one handed jobLife doesn't start till around 1500nm 2 Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 16y 11m 28d Gender: Male Location: Probably above atmospheric pressure Posted 14/11/13 05:35 AM Share Posted 14/11/13 05:35 AM (edited) LOL how long is the torque wrench that you need to make 1500Nm stick? Edited 14/11/13 05:36 AM by -SteveR- Link to comment Share on other sites More sharing options...
Lennox Member 2,586 Member For: 11y 8m 26d Gender: Male Location: Perth Posted 14/11/13 06:06 AM Share Posted 14/11/13 06:06 AM Torque wrench battle at next maintenance day. Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 1m 29d Gender: Male Location: Perth Posted 14/11/13 06:18 AM Share Posted 14/11/13 06:18 AM I have a 1" drive torque multiplier, I'll take you all on! Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 26d Gender: Male Location: Perth Posted 14/11/13 06:30 AM Share Posted 14/11/13 06:30 AM LOL how long is the torque wrench that you need to make 1500Nm stick?Nice wench EERRR I mean wrench. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now