AzMahoony Hench, but no longer shredded or tanned. Member 3,343 Member For: 17y 7m 26d Gender: Male Location: Canning Vale, W.A Posted 24/07/13 02:02 AM Share Posted 24/07/13 02:02 AM Sorry guys. I should have said I have already purchased a walbro 800hp intake pump. Would that be sufficient? Link to comment Share on other sites More sharing options...
IH8TOADS Silver Donating Members 3,618 Member For: 19y 4m 15d Gender: Male Location: OZ Posted 24/07/13 02:07 AM Share Posted 24/07/13 02:07 AM Ninka's BA is a good example. He runs 21psi dropping ~17 iirc and he runs no surge and a VERY expensive engine. The later in tank swirls are a better design than the BA/BF so it can be less of an issue with just an intank Walbro. Personally I would just leave the intank and bolt on a Process West surge for piece of mind...but if you are tight on coin then a in-tank Walbro will suit most. Link to comment Share on other sites More sharing options...
F6rspec3 Member 63 Member For: 11y 4m 21d Gender: Male Posted 24/07/13 02:15 AM Share Posted 24/07/13 02:15 AM what pressure do you guys run in your tyres Link to comment Share on other sites More sharing options...
AzMahoony Hench, but no longer shredded or tanned. Member 3,343 Member For: 17y 7m 26d Gender: Male Location: Canning Vale, W.A Posted 24/07/13 02:15 AM Share Posted 24/07/13 02:15 AM Fair enough mate. I am a little tight as im trying to do the house and car at the same time.. bit silly really. Had the surge/044 setup on my BF and the whine gave me the sh*ts. Is that still an issue? Link to comment Share on other sites More sharing options...
Boganspeed Will do skids for food Silver Donating Members 1,177 Member For: 13y 18d Gender: Male Location: Perth SOR Posted 24/07/13 02:23 AM Share Posted 24/07/13 02:23 AM (edited) I have a DW300 lph in a surge tank through XFT and I'm working on the assumption that it works because I can't hear a thing and my motor hasn't melted yet.@Rspec. I run 42psi in my 20's Edited 24/07/13 02:25 AM by Boganspeed Link to comment Share on other sites More sharing options...
IH8TOADS Silver Donating Members 3,618 Member For: 19y 4m 15d Gender: Male Location: OZ Posted 24/07/13 03:56 AM Share Posted 24/07/13 03:56 AM The early Process West solid mounted 044's were very noisy Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 16y 11m 29d Gender: Male Location: Probably above atmospheric pressure Posted 24/07/13 04:35 AM Share Posted 24/07/13 04:35 AM 40psi in my ku31 17".Good methodology Phil! Link to comment Share on other sites More sharing options...
Boganspeed Will do skids for food Silver Donating Members 1,177 Member For: 13y 18d Gender: Male Location: Perth SOR Posted 24/07/13 05:02 AM Share Posted 24/07/13 05:02 AM Heh yeah. Although I am planning to change out my egt guage for fuel pressure one day.......one day. Link to comment Share on other sites More sharing options...
XtRmn8 570Nm @1800rpm Donating Members 2,441 Member For: 21y 2m 1d Gender: Male Location: Perth, WA Posted 24/07/13 05:43 AM Share Posted 24/07/13 05:43 AM 40psi as well, running factory 19" Dunlops. Link to comment Share on other sites More sharing options...
MurdoK Donating Members 719 Member For: 14y 5m 1d Gender: Male Location: Perth,WA Posted 24/07/13 05:58 AM Share Posted 24/07/13 05:58 AM (edited) Hi MurdoK, what wheels do you have on your car?I am squinting at your avatar picture Axis superhiroVery popular on every second b series t in perth as some would know Maybe a silly question but is there a trick to pulling pads out of a brembo 6 pot caliper for fg's? Edited 24/07/13 06:02 AM by MurdoK Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now