Jump to content

WA Spotted & Chit Chat Thread


cunners

Recommended Posts

  • Will do skids for food
  • Silver Donating Members
  • Member For: 13y 7d
  • Gender: Male
  • Location: Perth SOR

Squishy bushes causing toe out on braking IIRC?

I'm a real cruisey driver 99.5% of the time so I don't know it that's it.

Link to comment
Share on other sites

  • skids
  • Donating Members
  • Member For: 11y 10m 14d
  • Gender: Not Telling

Everyone was accusing me of driving hard when they saw my front tyres, the passenger side has excessive wear on the outer edge, the drivers side has excessive wear on the inner edge.

Was warned upon getting wheels aligned to get a camber put put in and yeah that never occured and yep two new front tyres coming up .

Link to comment
Share on other sites

  • Manual mode ________________________ All day, erryday
  • Donating Members
  • Member For: 16y 11m 18d
  • Gender: Male
  • Location: Probably above atmospheric pressure

Not driving it hard enough then! hahaha.

Link to comment
Share on other sites

  • skids
  • Donating Members
  • Member For: 11y 10m 14d
  • Gender: Not Telling

Not driving it hard enough then! hahaha.

Oh the sound it makes is just driving me absolutely nuts.

when I'm cornering left its super quiet then the noise from the front tyres is really loud when going straight or turning to the right :(

Link to comment
Share on other sites

  • Silver Donating Members
  • Member For: 19y 4m 4d
  • Gender: Male
  • Location: OZ

There is no real gain to be had using an external gate on the factory manifold....unless you want the screamer noise of course. I well ported internal gate can in some instances work better. I.e the older ETM 38mm external setups used a press bent screamer pipe so effectively the gate size is less than 38mm.

  • Like 1
Link to comment
Share on other sites

  • Hench, but no longer shredded or tanned.
  • Member
  • Member For: 17y 7m 14d
  • Gender: Male
  • Location: Canning Vale, W.A

There is no real gain to be had using an external gate on the factory manifold....unless you want the screamer noise of course. I well ported internal gate can in some instances work better. I.e the older ETM 38mm external setups used a press bent screamer pipe so effectively the gate size is less than 38mm.

Thanks mate. Deal fell through on the setup I was looking at anyways.

one last question. If I were to grab a gtx, can I wait untill a little further down the track to purchase the surge tank or is it highly reccomended to run one?

Link to comment
Share on other sites

  • Donating Members
  • Member For: 14y 4m 21d
  • Gender: Male
  • Location: Perth,WA

A gtx will outperform your std fuel system when cranked uup.but if you go for a real conservative tune and down the track install surge and retune then should be no probs. But paying for two tunes seems silly.

Link to comment
Share on other sites

  • Will do skids for food
  • Silver Donating Members
  • Member For: 13y 7d
  • Gender: Male
  • Location: Perth SOR

I asked XFT this question and Simon said sorta the same as Murdok.

It can also be an issue if you get heavy footed with low fuel levels.

One of their mechs also told me separately that he would be uncomfortable at anything over 370-380 in an FG without one.

The other thing is that you wouldnt want to be strapped onto a dyno and find your fuel system can't keep up and then have to rush around trying to get something in there.

I spent the money for peace of mind and the cost of a second tune would almost cost as much as a surge tank anyway.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'