#96 Member 281 Member For: 11y 11m 29d Posted 29/03/13 02:37 AM Share Posted 29/03/13 02:37 AM nice work man! starting to pedal that thing pretty quick from when I seen ya there.Noticed this when unloading the wheels and nitto NT05Rs I used on Wednesday night.At least I know they were sticking to the track !Need more tyre pressure I think. Was at 23psi. Will go back to 30 next time.12.3 @110mph with a 1.86 - 60ftimage.jpgalso, P100. can the ecu even adjust enough to put in the extra fueling that is required/demanded by an ethanol blend? yes, its 10%, but its something.I cant see the point in it as RON /= power. RON = knock resistance. usless, without more comp or boost. Link to comment Share on other sites More sharing options...
XtRmn8 570Nm @1800rpm Donating Members 2,441 Member For: 21y 2m 1d Gender: Male Location: Perth, WA Posted 29/03/13 03:52 AM Share Posted 29/03/13 03:52 AM Hahaha very true!!So United P100 is in, new tune loaded... Happy days.Noticeable difference compared to a 98RON tune? Link to comment Share on other sites More sharing options...
IH8TOADS Silver Donating Members 3,618 Member For: 19y 4m 15d Gender: Male Location: OZ Posted 29/03/13 07:19 AM Share Posted 29/03/13 07:19 AM nice work man! starting to pedal that thing pretty quick from when I seen ya there.also, P100. can the ecu even adjust enough to put in the extra fueling that is required/demanded by an ethanol blend? yes, its 10%, but its something.I cant see the point in it as RON /= power. RON = knock resistance. usless, without more comp or boost.Stock car yes. Tuned no. More Ron, more timing, more power! Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m Gender: Male Location: Perth Posted 29/03/13 07:55 AM Share Posted 29/03/13 07:55 AM Noticed this when unloading the wheels and nitto NT05Rs I used on Wednesday night.At least I know they were sticking to the track !Need more tyre pressure I think. Was at 23psi. Will go back to 30 next time.12.3 @110mph with a 1.86 - 60ftimage.jpgBA 17's where notirious for doing this when we first starting pushing decent power through them with sticky tyres. Drill and tap some beadlocking screws Phil? Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 16y 11m 30d Gender: Male Location: Probably above atmospheric pressure Posted 29/03/13 08:45 AM Share Posted 29/03/13 08:45 AM It's come down to these sets of XXR18x8.5 +30 front and 18x9.5 +38 rear. I'm leaning towards this a bit more, but I can't rotate wheels at all if using KU31s (directional tread). Rims are also 11.5kg/11.2kgor these in more tyre rotation friendly 18x8.75 +20 all round. 9.6kg. Have seen this pattern many times before though on XR6Ts. Link to comment Share on other sites More sharing options...
Krazy Kyle Get It To Wheelspin Uncontrolably Then Give It Another 5 Pounds Cruise Control 2,697 Member For: 14y 1m 2d Gender: Male Location: Work Posted 29/03/13 11:22 AM Share Posted 29/03/13 11:22 AM Putting in some serious thought on this in the forums a Steve . No wonder u been stock for so long. I'd go the top ones. Really big on the weight as well I've noticed. Although got me thinking about my wheels.... Although going back to 18's (that also clear brembos) just makes me think the wheels will look small in the arches of the FGAnd yeah, seems bead locks are a good thing if u spend a bit of time on the strip Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 16y 11m 30d Gender: Male Location: Probably above atmospheric pressure Posted 29/03/13 01:54 PM Share Posted 29/03/13 01:54 PM I don't want to regret the purchase, I don't have the cash to waste. I'm trusting in the quality of the rims being guaranteed by the VIA certification they carry (only know what that is after reading Rota quality arguments).Yeah I read Tocchi once write that he thought 18's were perfect on B series, lucky for me. FGs are cavernous especially the ute rears.Stock rims are like 14 or 15kg so really the only way to go is up...or is that down. Aiboart mentioned that steering response is noticeably affected by rim weight, I think also load on the knuckle/bearings should be reduced which is also a win.Yeah I like the top ones too. Prefer fatter spokes to the web style even if I gain 2kg. Link to comment Share on other sites More sharing options...
XtRmn8 570Nm @1800rpm Donating Members 2,441 Member For: 21y 2m 1d Gender: Male Location: Perth, WA Posted 29/03/13 02:15 PM Share Posted 29/03/13 02:15 PM Steve, I went from a set of BF XR8 18" to GMAX Kazei in 19x8.5" all round on the old ute and the difference was very noticeable in steering feel. The GMAX wheels were very light compared to the factory BF 18s, from memory it was something like 16kg vs 10-11kg.From memory they were either +30 or +32 so filled the guards out nicely as well. Also very similar in design to the second picture. 1 Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 16y 11m 30d Gender: Male Location: Probably above atmospheric pressure Posted 29/03/13 03:51 PM Share Posted 29/03/13 03:51 PM I've folded to my inner sensible and will get 4x 9" rims in +27 as discussed in Rota wheel thread. They are a grand and in stock here in WA, whereas the similar rims from XXR are out of stock and will stop me rotating them front to back.Pretty much copies of the original SSR rims I shopped first up too, just an inch wider and larger Link to comment Share on other sites More sharing options...
Grug Member 1,318 Member For: 16y 3m 25d Posted 31/03/13 10:05 PM Share Posted 31/03/13 10:05 PM So, car is currently falling apart...Still having the headlight problem, car goes in for service soon so will talk to service manager.Bumper must have got caught on a curb or something (I don't recall doing it, might have been parents), grey insert of bumper ripped out.Headliner just randomly started to hang down where it meets the windscreen, what the f*ck? Anyone know a good place to get it re-glued that wont charge an arm and a leg?Oh, and another rust spot has appeared on the rear quarter panel on the other side of the fuel cap.f*cking fords. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now