Jump to content

WA Spotted & Chit Chat Thread


cunners

Recommended Posts

  • Donating Members
  • Member For: 15y 11m 6d
  • Gender: Male
  • Location: Pertthh W.A

Though on 20+ psi you will see a gain?

And what rwkw will the bigger wheel and front cover run out compared to the stock one.

Link to comment
Share on other sites

  • Member
  • Member For: 16y 3m 13d

Got done for 25 over the limit tonight (Going to fight it, I dont think I was doing 25 over the limit and when I asked them to show me they claimed they already wiped it), then at mates house, start car, idle chatting for 5 minutes, warning light comes on, turn car straight off, open bonnet and coolant is completely gone... Grass underneath the car soaked in coolant. f*ck.

Link to comment
Share on other sites

  • Silver Donating Members
  • Member For: 19y 4m 3d
  • Gender: Male
  • Location: OZ

Though on 20+ psi you will see a gain?

And what rwkw will the bigger wheel and front cover run out compared to the stock one.

I'm not sure when the bigger wheel runs out of puff as I've never pushed one. It will go harder at the top end, but you dot use that area on the street as much.

If I was going to run above 22 - 23 psi id do it properly and get a decent turbo and manifold. A GT4202 with a split pulse manifold outspools the GT3566r on the stock mani. under 22psi id just use the stock unit.....but that's only my opinion, quite a few people like the 66mm wheel.

  • Like 1
Link to comment
Share on other sites

  • Donating Members
  • Member For: 13y 7m 20d
  • Gender: Male
  • Location: Baldivis, Wait Ages.

Got done for 25 over the limit tonight (Going to fight it, I dont think I was doing 25 over the limit and when I asked them to show me they claimed they already wiped it), then at mates house, start car, idle chatting for 5 minutes, warning light comes on, turn car straight off, open bonnet and coolant is completely gone... Grass underneath the car soaked in coolant. f*ck.

You cant win hey hahaha

Link to comment
Share on other sites

  • Will do skids for food
  • Silver Donating Members
  • Member For: 13y 6d
  • Gender: Male
  • Location: Perth SOR

Got done for 25 over the limit tonight (Going to fight it, I dont think I was doing 25 over the limit and when I asked them to show me they claimed they already wiped it)

I used a Barrister a while back to get me off a potential license losing charge.

Not cheap but hey, you get what you pay for.

I can dig out his details if you want.

Link to comment
Share on other sites

  • Manual mode ________________________ All day, erryday
  • Donating Members
  • Member For: 16y 11m 17d
  • Gender: Male
  • Location: Probably above atmospheric pressure

You cant win hey hahaha

Plus one...could you see if any hoses had split or come off? You've got the worst luck man! :( Day cruise on Sunday too...

Link to comment
Share on other sites

  • Donating Members
  • Member For: 21y 10m 18d
  • Gender: Male
  • Location: Perth, WA

Cant see any splits, might be in unreachable position.

Pressure test the system, it could be anywhere.

The radiators are not too great on our cars either, and if you have the sightest corrosion, it doesn't take a lot to make a hole in the element, and can be damn hard to see too.

  • Like 1
Link to comment
Share on other sites

  • Donkey Dick
  • Member
  • Member For: 14y 7m 23d
  • Gender: Male

Who knows of a dyno that can be hired, want to do a power run to check my car

Whilst Ben's suggestion is a good one, the following workshop can give an un-biased run as they have nothing to do with tuning turbo falcons Aiden. Mitch will give a no bullsh*t printout & you will know exactly where you stand :spoton:

http://www.waperf.com/contact.html

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'