Cheaty McCheats Totally not a Cop Donating Members 821 Member For: 13y 7m 27d Gender: Male Location: Melbourne Posted 01/05/12 12:23 AM Share Posted 01/05/12 12:23 AM I bet you that when the heat gets out of the cable, it'll start fine.It's parked in a 3 hour bay thankfully so I have until 11 to get it. If it doesn't start at 11, I'll get another ticket and have until 1.30, which is when I finish work. Link to comment Share on other sites More sharing options...
Grug Member 1,318 Member For: 16y 1m 23d Posted 01/05/12 08:15 AM Share Posted 01/05/12 08:15 AM Time has come, need new brakes. Ford Genuine quoted me like 3k, l0l. Ideas/opinions on good disc/pad combinations? Don't want to be spending an arm and a leg. Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 16y 9m 28d Gender: Male Location: Probably above atmospheric pressure Posted 01/05/12 08:25 AM Share Posted 01/05/12 08:25 AM Have read a thread on here somewhere about options for aftermarket discs for Brembos , check out brakes section probably in there. Link to comment Share on other sites More sharing options...
MurdoK Donating Members 719 Member For: 14y 3m Gender: Male Location: Perth,WA Posted 01/05/12 08:32 AM Share Posted 01/05/12 08:32 AM Matt @ RaceBrakesSydney Grug. I run DBA4000series rotors and QFM pads. They work well and low dust compared to standard brembo pads Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 16y 9m 28d Gender: Male Location: Probably above atmospheric pressure Posted 01/05/12 10:25 AM Share Posted 01/05/12 10:25 AM Have used QFM as my last set and liked them, decent performance, low dust. Think these Remsas bite better but they are a fair bit dustier. Link to comment Share on other sites More sharing options...
WARCHILD Member 205 Member For: 16y 16d Gender: Male Location: Kingsley, WA Posted 01/05/12 11:43 AM Share Posted 01/05/12 11:43 AM +1 Matt at Race Brakes SydneyI have the DBA5000 Rotors front and 4000 at the rear.I usually use the Ferodo DS2500 pads and they work quite well. I currently have a set of QFM A1RM pads to go on next after hearing good things. Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 16y 9m 28d Gender: Male Location: Probably above atmospheric pressure Posted 01/05/12 12:31 PM Share Posted 01/05/12 12:31 PM Ah yes I used the street friendly HPX pads from QFM, A1RM more high performing pads. Link to comment Share on other sites More sharing options...
Grug Member 1,318 Member For: 16y 1m 23d Posted 01/05/12 01:53 PM Share Posted 01/05/12 01:53 PM Matt @ RaceBrakesSydney Grug.I run DBA4000series rotors and QFM pads. They work well and low dust compared to standard brembo padsWhat cost would I be looking at? Link to comment Share on other sites More sharing options...
IH8TOADS Silver Donating Members 3,618 Member For: 19y 2m 13d Gender: Male Location: OZ Posted 01/05/12 01:56 PM Share Posted 01/05/12 01:56 PM DS2500 has been great for me. Not a fan of QFM since I got a set where the surface area of the material was less than stock. Link to comment Share on other sites More sharing options...
MurdoK Donating Members 719 Member For: 14y 3m Gender: Male Location: Perth,WA Posted 01/05/12 02:20 PM Share Posted 01/05/12 02:20 PM What cost would I be looking at?Not to sure mate but when I looked around a while back it was cheaper from him by a long shot and that included delivery. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now