Jump to content

WA Spotted & Chit Chat Thread


cunners

Recommended Posts

  • Moar Powar Babeh
  • Lifetime Members
  • Member For: 19y 3m 2d
  • Gender: Male
  • Location: Perth

yes and or no. I couldnt get the factory 2 step exactly to my liking. Its fuel cut not spark hence no fully sik bee-r esque backfiring,

but i dont have neutral rev limit hysteresis in HPT (maybe be in SCT tho?) so the difference in “on” and “off” rpm was too high IMHO

Ie: set is too 3500rpm and it would fluctuate between 3250 and 3500, Also fuel instead of spark cut meant less spool on the limiter (best I could get @ 3800 rpm was 10lb)

The Little blue box is a spark cut setup with WOT shift ign cut so while being vicious on the Cat should give higher boost on the limiter and the WOT shift function should be good for a 10th or 2

Link to comment
Share on other sites

  • Sandtrap Motorsport
  • Donating Members
  • Member For: 16y 1m
  • Gender: Male
  • Location: Perth

fuel cut = gay.... spark cut ftw ;D

but better than nothing :)

I've got SCT going on the car this week, so ill explore the 2step options with that :) if not, it will be time to play with stuff :)

Link to comment
Share on other sites

  • Moar Powar Babeh
  • Lifetime Members
  • Member For: 19y 3m 2d
  • Gender: Male
  • Location: Perth

Matt, In order to get the most from the factory two step you will need to either mod the clutch switch position or the reverse lockout wiring.

If you dont mod the clutch switch activation point the limiter will come back on everytime you even look at the clutch pedal. If you leave this stock and mod the reverse lockout wiring so its powered by the brake light switch a 6th to 5th downshift with a small tap on the brake will open the lockout and could mean you end up trying to grab reverse

Link to comment
Share on other sites

  • Silver Donating Members
  • Member For: 19y 5m 17d
  • Gender: Male
  • Location: OZ

yes and or no. I couldnt get the factory 2 step exactly to my liking. Its fuel cut not spark hence no fully sik bee-r esque backfiring,

but I dont have neutral rev limit hysteresis in HPT (maybe be in SCT though?) so the difference in “on” and “off” rpm was too high IMHO

Ie: set is too 3500rpm and it would fluctuate between 3250 and 3500, Also fuel instead of spark cut meant less spool on the limiter (best I could get @ 3800 rpm was 10lb)

The Little blue box is a spark cut setup with WOT shift ign cut so while being vicious on the Cat should give higher boost on the limiter and the WOT shift function should be good for a 10th or 2

For others that don't know (luke does :P), you're wasting your time with using the factory style two step....it can be done but it won't work like it does with the non-DBW cars. Plus it bounces around on the limiter too much as Luke mentioned, easier just to hold it on your desired RPM. Mine never backfired though Luke?

The same problem we have with the DBW (drive by wire) falcons is experienced by the late model mustangs in the US and they use other methods such as the WOT box (they're big on 2-steps over there as all non-DBW cars can enable the factory 2-step very easily and it works flawlessly).

Link to comment
Share on other sites

  • Moar Powar Babeh
  • Lifetime Members
  • Member For: 19y 3m 2d
  • Gender: Male
  • Location: Perth

backfire? Niether has mine Toads?

My intention is to set the WOT Box up at <3k and use it as more of a launch assit than a true 2 step (I can't see a BA sedan driveline take a 5K 2 step launch :nukem:) Im more excited about the WOT shift function TBH :3gears:

Link to comment
Share on other sites

  • Totally not a Cop
  • Donating Members
  • Member For: 13y 11m
  • Gender: Male
  • Location: Melbourne

Woo cars getting fixed up, total $9000.

Looks like I'll be coming on the next cruise, providing I haven't lost my license by then. Gotta fine due on the 15th that'll put me over :(

Link to comment
Share on other sites

  • Member
  • Member For: 16y 7m 13d
  • Gender: Male

Thanks to Dean for the Brembo's at mate's rates :spoton:

Anyone else keen on 6pot fronts, 4pot fronts or 4pot rears give me a shout. Can get goooood pricing on new Brembo's for a limited time.

Hey dude, how much can you get brembos for?

Got a bf ute so I think only need front?

Link to comment
Share on other sites

  • Manual mode ________________________ All day, erryday
  • Donating Members
  • Member For: 17y 1m
  • Gender: Male
  • Location: Probably above atmospheric pressure

I reiterate, there must be a distinct presence of BRAAPBRAPPBRAPBRAPBRAAAP at the next cruise you attend Luke :) hahaha. Maybe I'll see if Torquen can come along in his olive green Silvia to satisfy my limiter desire...he's probably gotten a sticker or something by now though!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'