Jump to content

WA Spotted & Chit Chat Thread


cunners

Recommended Posts

  • Manual mode ________________________ All day, erryday
  • Donating Members
  • Member For: 16y 10m
  • Gender: Male
  • Location: Probably above atmospheric pressure

What's a catch can worth anyway? It stops excess oil in the intake system right, I assume it gets there from the recirculation of a bit of air?

Edit - just reading it's from the blow by oil mist venting through that little PCV tube back to the intake. Is that the same one which snapped on my car ages ago? I seem to recall mixing that up with the PCV tube though.

Edited by -SteveR-
Link to comment
Share on other sites

  • Get It To Wheelspin Uncontrolably Then Give It Another 5 Pounds
  • Cruise Control
  • Member For: 13y 11m 3d
  • Gender: Male
  • Location: Work

:spotted: a bunch of f6's and XR6T's going past airport hahahahaha

was fun ppls. Thanks Steve. shame about the random cyclone giving us sh*tty weather. was a good chance to test the new rubber though. till next time I guess..

Link to comment
Share on other sites

  • Manual mode ________________________ All day, erryday
  • Donating Members
  • Member For: 16y 10m
  • Gender: Male
  • Location: Probably above atmospheric pressure

lol!! Terrible luck man :( Keen to see what testing reveals.

I hosed mine down, gave it a wipe with the soapy hand cloth and dried. Couldn't leave it filthy like that!!

Wouldn't mind some gate myself but I need other things done like rear bushes. My turbo is barely holding the gases as it is, makes some odd noises at times due to the wastegate spring only barely holding it shut I think!

Link to comment
Share on other sites

  • Member
  • Member For: 17y 9m
  • Gender: Male
  • Location: PERTH WA

Would it be the crank case ventilation, with the limited mods that he has? I've never heard of the dipstick popping out before. Is this a problem you've come across before Luke?

You haven't overfilled the oil have you Grug......

Link to comment
Share on other sites

  • Moar Powar Babeh
  • Lifetime Members
  • Member For: 19y 1d
  • Gender: Male
  • Location: Perth

Would it be the crank case ventilation, with the limited mods that he has? I've never heard of the dipstick popping out before. Is this a problem you've come across before Luke?

You haven't overfilled the oil have you Grug......

Theres a 1way valve installed in between the plenum and rocker cover. it's ment too allow crankcase gases too be drawn into the plenum under vacuum/ cruise conditions and close off under boost too prevent crankcase over pressure. if this has failed the crankcase becomes pressurised under boost and the pressure can pop out the dip stick, it also pressurises the turbo oil drain and can cause issues with lubrication/seals as the oil cannot drain out of the turbo quickly enough

Link to comment
Share on other sites

  • Manual mode ________________________ All day, erryday
  • Donating Members
  • Member For: 16y 10m
  • Gender: Male
  • Location: Probably above atmospheric pressure

Spotted NOTHING BUT BLOODY SUN today in the hills.

I say re run the map in 3 weeks or whenever rosters permit. How is February 19th for people?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'