Grug Member 1,318 Member For: 16y 4m 1d Posted 01/12/10 07:56 PM Share Posted 01/12/10 07:56 PM I think Process west has the biggest cooler that bolts onto stock piping? Link to comment Share on other sites More sharing options...
xr6t_menace Member 167 Member For: 15y 5m 20d Gender: Male Location: Yangebup, WA Posted 02/12/10 04:37 AM Share Posted 02/12/10 04:37 AM If you enjoy peak power for one run and then much less immediately after, go a monza as they are dirt cheap.If you want better power, easier and more repeatable (back to back runs) then get a better brand second hand from the forum. I saw the same Nizpro cooler I use for sale for $500, the pipes for $250 or something. You can get cheaper and maybe even a better brand that bolts straight in to stock piping.is this from experience? and id love to keep the stock pipes as im not chasing massive power so no need to be replacing them what do u all think? process west stage 1 ? or is there other options Link to comment Share on other sites More sharing options...
Dirty32 Legendary member!! Donating Members 1,739 Member For: 17y 10m 7d Gender: Male Location: Dianella, West Oz Posted 02/12/10 05:54 AM Share Posted 02/12/10 05:54 AM Its from many peoples experiences mate...The Monza is just not an efficient / repeatable cooler.Its ok for one run, but heat soak will soon start sinking in.Do it once - do it right!More than enough of us have learnt first hand to do things right the first time now. You waste too much money upgrading the same parts all of the time if you dont! Link to comment Share on other sites More sharing options...
Grug Member 1,318 Member For: 16y 4m 1d Posted 02/12/10 07:23 AM Share Posted 02/12/10 07:23 AM I bought a PW Stage 1 only to upgrade like 2 months later. Link to comment Share on other sites More sharing options...
xr6t_menace Member 167 Member For: 15y 5m 20d Gender: Male Location: Yangebup, WA Posted 02/12/10 11:09 AM Share Posted 02/12/10 11:09 AM yer ok monza is out then haha good job I asked 1st wats an f6 stock cooler get ya to ? 280rwkw I bought a PW Stage 1 only to upgrade like 2 months later.watd your pw stg1 cost grug an wered u go xft? Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 5d Gender: Male Location: Probably above atmospheric pressure Posted 02/12/10 11:41 AM Share Posted 02/12/10 11:41 AM Spotto [1R SPEC] on Roe Hwy, Ego I think. Came up behind fast so I gave it a bit, let him (possibly a her driving) swap lanes and then found a Mike look alike (sort of) had been following them! Mercury Silver XR, shaved boot, all black dual exhaust tips about 3" or so. Tint and some small sticker on the side window in that hektik street graffiti font type that stef's "show some" sticker was in, you all know what I'm talking about Car looked good and gave a small flutter as he passed. Link to comment Share on other sites More sharing options...
Grug Member 1,318 Member For: 16y 4m 1d Posted 03/12/10 09:20 PM Share Posted 03/12/10 09:20 PM (edited) yer ok monza is out then haha good job I asked 1st wats an f6 stock cooler get ya to ? 280rwkw watd your pw stg1 cost grug an wered u go xft?$1200 fitted, I've still got it lying around if you want to buy it off me And yeh went through XFT. Edited 03/12/10 09:21 PM by Grug Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 1m 2d Gender: Male Location: Perth Posted 04/12/10 01:21 AM Share Posted 04/12/10 01:21 AM is this from experience? and id love to keep the stock pipes as im not chasing massive power so no need to be replacing them what do u all think? process west stage 1 ? or is there other optionsDont bother with the monza, just grab Grugs process west stage 1. That will work well at around 300 Link to comment Share on other sites More sharing options...
XtRmn8 570Nm @1800rpm Donating Members 2,441 Member For: 21y 2m 8d Gender: Male Location: Perth, WA Posted 04/12/10 04:09 AM Share Posted 04/12/10 04:09 AM f s I x, I have a full Plazmaman stage 1 pipe kit to suit the cooler.$1200 fitted, I've still got it lying around if you want to buy it off me And yeh went through XFT.Grug, did you just run the Stage 1 cooler or did you also have the replacement pipe kit? Link to comment Share on other sites More sharing options...
Grug Member 1,318 Member For: 16y 4m 1d Posted 04/12/10 07:28 AM Share Posted 04/12/10 07:28 AM I ran just the kit, no replacement pipes. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now