discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 16y 9m 29d Gender: Male Location: Probably above atmospheric pressure Posted 21/07/10 01:52 PM Share Posted 21/07/10 01:52 PM (edited) LLLLLLOL!!!Was hoping for a good reply from someone Nice work hahaha!What's better, twin externals or one internal? Guess it doesn't matter as long as you're on the right end of the pumping edit.... insert joke about the missus having tight clearances so less fluid escapes.Hrm getting a bit late, can't hardly tell! Edited 21/07/10 01:56 PM by -SteveR- Link to comment Share on other sites More sharing options...
Tocchi Sandtrap Motorsport Donating Members 2,055 Member For: 15y 9m 29d Gender: Male Location: Perth Posted 21/07/10 03:45 PM Share Posted 21/07/10 03:45 PM as much fuel as possible, there is never over the top with fuel or oil supply Link to comment Share on other sites More sharing options...
xr6t4life Member 129 Member For: 15y 2m 7d Gender: Male Location: Perth WA Posted 22/07/10 06:18 AM Share Posted 22/07/10 06:18 AM does any one know of any turbo shops around perth that can do the wastegate porting and bigger flapper or is it cheeper to send it off to the eastern states??? Link to comment Share on other sites More sharing options...
IH8TOADS Silver Donating Members 3,618 Member For: 19y 2m 15d Gender: Male Location: OZ Posted 22/07/10 06:32 AM Share Posted 22/07/10 06:32 AM as much fuel as possible, there is never over the top with fuel or oil supplyThere is over the top supply at low fuel flow with twin 044's on the standard reg. Drilling out the reg return helps but aftermarket reg is the go. Standard reg and a few 044's see's 0.5 - 0.8 bar above what it should be at idle. Simon @ xtreme ford tuning has had input from the best eastern states porters and as such his are very good and done in-house. Most WA guys were getting them done via turbotech which are too arogant to listen to how it should be done properly. DJKICE can give you some feedback on this as he went through hell with porting! Link to comment Share on other sites More sharing options...
djkice Boost Addict Member 1,273 Member For: 16y 2m Gender: Male Location: Perth, W.A. Posted 22/07/10 08:18 AM Share Posted 22/07/10 08:18 AM Save yourself hassles and $$... get it done right the first time. Give Simon from XFT a call. Check out the forum sponsors.I had porting jobs done from the best over east and local from turbo tech etc. different sizes, angles, wastegate actuators etc tried it all.Cost me a fortune to get right. Link to comment Share on other sites More sharing options...
RIP_HSV HOON Member 1,636 Member For: 14y 6m 7d Gender: Male Location: W.A Posted 22/07/10 10:28 AM Share Posted 22/07/10 10:28 AM does any one know of any turbo shops around perth that can do the wastegate porting and bigger flapper or is it cheeper to send it off to the eastern states???MTQ best prices and quality Link to comment Share on other sites More sharing options...
xr6t ego Member 1,112 Member For: 17y 8m 29d Gender: Male Location: PERTH WA Posted 22/07/10 11:10 AM Share Posted 22/07/10 11:10 AM Simon at Xtreme Ford Tuning did mine and had the best result. Link to comment Share on other sites More sharing options...
XF Falcon <put funny sh*t here> Member 3,365 Member For: 17y 10m 14d Gender: Male Location: Perth, NOR Posted 22/07/10 11:29 AM Share Posted 22/07/10 11:29 AM Simon at XFT had to fix the f*ck ups from TurboTech. I'd recommend Simon also. Link to comment Share on other sites More sharing options...
RIP_HSV HOON Member 1,636 Member For: 14y 6m 7d Gender: Male Location: W.A Posted 22/07/10 11:38 AM Share Posted 22/07/10 11:38 AM Does anyone know where I can get a set of 90/10's in W.A? tried Pedders they dont do them... Link to comment Share on other sites More sharing options...
Guest Slash Guests Posted 22/07/10 02:33 PM Share Posted 22/07/10 02:33 PM Don't muck around with porting the BA/F housing, just buy a FG F6 housing. Has the larger wastegate hole & flapper, plus it's made with a higher nickel content than the earlier ones making it less prone to cracking.MTQ are the best to go through for a new housing Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now