Jump to content

Recommended Posts

  • Member
  • Member For: 20y 9m
  • Gender: Male
  • Location: Newcastle NSW

Any lurkers here go to the National Dyno Day held around the country on Saturday just gone?

I was working then had aStaff Xmas party to attend and free beer wins every time, so I didnt go.

Any results etc.

Link to comment
https://www.fordxr6turbo.com/forum/topic/21588-national-dyno-day/
Share on other sites

  • Formerly Turbo6
  • Donating Members
  • Member For: 22y 5m 8d
  • Location: North Brisbane

Mate, Goldie and I went to the Qld one both competing in Class 4. Great Brisbane day, very, very hot and humid. The measured intake temp near my filter was 55 degrees! Also around 90% humidity so not real good for power figures - ask Ian (Goldie) how much power it sapped after he was on the exact same dyno only 24 hours earlier.................

My end result was 475 horsepower (355 RWKW's). It had a fair bit of heat soak in it also as it had done two power runs before I loaded in my "good" tune and then ran the final numbers. I was lucky enough to win my class and the Qld day outright. I was the second last car on the dyno and I thought (so did others) that I may in fact get a runners-up trophy when the last car was reversed onto the rollers - a 460 big block WITH NITROUS....... He got (I think) 455 HP on his first pull and it went downhill from there with overheating......... So, GO THE 'PHOON !!!!!!!!!!!! Special mention to Simon from Xtreme Ford tuning for that something special that is my tune. :laughing:

  • My new toy
  • Lifetime Members
  • Member For: 22y 1m 25d
  • Gender: Male
  • Location: stanthorpe wine capital of qld.

F6 rapid has it right I was winning until him and the 460 turned up but that's cool I was beaten by 2 very nice and fantastic fords owned by great guys.

I got 403 rwhp on the day but same dyno the day before I got 438 but it was alot cooler and less humid.

It was a great day at rdp and steve as always did a great effott.

Ian

PS I came thrid in class4 and it looks lookes like sixth overall for australia.

  • My new toy
  • Lifetime Members
  • Member For: 22y 1m 25d
  • Gender: Male
  • Location: stanthorpe wine capital of qld.

Forgot to mention sledgehammer in his f6 and rapid chris in his turbo ute where there.

Ian

  • Donating Members
  • Member For: 21y 7m 25d
  • Gender: Male
  • Location: Sydney NSW

Shahin my ride was at the Sydney Dyno day while I was working in Melbourne. A 1st place with 355rwkw in Class 4. Thanks to Spiro and the guys for looking after my car for the weekend and from all reports for putting on a good day and excellent Barbie.

Regards

M G

  • Donating Members
  • Member For: 21y 7m 20d
  • Location: Sydney
  Master G said:
Shahin my ride was at the Sydney Dyno day while I was working in Melbourne. A 1st place with 355rwkw in Class 4. Thanks to Spiro and the guys for looking after my car for the weekend and from all reports for putting on a good day and excellent Barbie.

Regards

M G

A great effort there Master G. 355 in an auto with a phase III kit. And these unichips supposedly can't make good power... :crybaby:

  • THE Member
  • Donating Members
  • Member For: 19y 11m 11d
  • Gender: Male
  • Location: Melbourne
  Geeseman said:
  Master G said:
Shahin my ride was at the Sydney Dyno day while I was working in Melbourne. A 1st place with 355rwkw in Class 4. Thanks to Spiro and the guys for looking after my car for the weekend and from all reports for putting on a good day and excellent Barbie.

Regards

M G

A great effort there Master G. 355 in an auto with a phase III kit. And these unichips supposedly can't make good power... :crybaby:

Did you get yours on the rollers Geeseman?

Chooka

  • Next stage, to the Pub in 10 seconds
  • Member
  • Member For: 20y 10m 2d
  • Gender: Male
  • Location: Berwick Victoria
  Eugene said:
Any lurkers here go to the National Dyno Day held around the country on Saturday just gone?

I was working then had aStaff Xmas party to attend and free beer wins every time, so I didnt go.

Any results etc.

Eugene, are you talking about FordForums National dyno day?

Rob...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'