Jump to content

Recommended Posts

  • Member
  • Member For: 19y 11m 28d

Has anyone got quad tips on their xr6t ute if so have u got any pics of it?? I just made the spoiler done the cutouts myself and the plastic welding myself I just wanna c how good it will look with 4 exhaust tips or 1 either side? thanks.

Link to comment
https://www.fordxr6turbo.com/forum/topic/21267-exhaust-question-for-utes/
Share on other sites

  • Member
  • Member For: 22y 3m 17d
  • Location: Newcastle

bobcatsrus, auto web concepts sell them for $385 in pursuit ute style (number plate in middle), personally reakon these look very very sweet. http://www.awcinfo.com/secureshop/category.php?cat_id=87

  • Member
  • Member For: 22y 3m 17d
  • Location: Newcastle
  Swanga said:
Heres what they looked like on my xr8

<{POST_SNAPBACK}>

Hey, mate have to say that's looks sweet.

Just wondering how you did it thou, as I would like to eventually do the same to my XR6T by splitting off exhaust into two.

But looking under my ute, noticed that the wheel is clamped up under the rear left, which I figured would be in the way for the left hand exhaust.

If you could provide a quick explanation (and a underbody pic if you have one) that would be awesome.

Cheers,

Ford Grunt

  • Benzene
  • Member
  • Member For: 20y 11m 19d
  • Gender: Male
  • Location: Out West

You can do it 2 ways, one way is to get rid of the spare and run twin pipes from the centre muffler into 2 resinators, or the way I did it was run a pipe out of the rear resonator in between the spare and the bumper then obviously out the 2nd cut out. So basically instead on running your twin tips out one hole one pipe gets used for the original hole and the other for the 2nd set of tips.

  • Member
  • Member For: 22y 3m 17d
  • Location: Newcastle
  Swanga said:
You can do it 2 ways, one way is to get rid of the spare and run twin pipes from the centre muffler into 2 resinators, or the way I did it was run a pipe out of the rear resonator in between the spare and the bumper then obviously out the 2nd cut out. So basically instead on running your twin tips out one hole one pipe gets used for the original hole and the other for the 2nd set of tips.

<{POST_SNAPBACK}>

I like the sound of the way you ended up doing it. Do it think it affected performance for the better or worse (or no noticiable difference)?

Cheers mate thanks for explaining it out :fool:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'