Ss Inductions Charcoal Guage Pod

[stang]

I filled up the screw holes and got a spray painter to spay it,definitely get rid of the screw holes

[fraggle]

  GOLDIE said:

  fraggle said:

Where do you get them from nobody in Tassie can get one for me and they dont even know what they look like  

You ask people about them yes we can get the one for the ss crapadoor will that fit.

Have tryed Rare spares , Repco ,Auto barn , Supercheap    ,all other riced up shops in town but nothing

HELP

<{POST_SNAPBACK}>

On there web site they list there retail supplies autobarn burnie stock them.

www.ssinductions.com.au

Ian

<{POST_SNAPBACK}>

Thanks didn't think of that

[johng001]

  stang said:

I filled up the screw holes and got a spray painter to spay it,definitely get rid of the screw holes

<{POST_SNAPBACK}>

What holds it on if fill in the holes????

[FPV TRANNY]

  johng001 said:

  stang said:

I filled up the screw holes and got a spray painter to spay it,definitely get rid of the screw holes

What holds it on if fill in the holes????

The bog he used to fill it

[Barry Blue]

  GOLDIE said:

  Barry Blue said:

  GOLDIE said:

Ours matched up great.

IAN

<{POST_SNAPBACK}>

Yeah, but has'nt yours been painted with your centre consol that fancy colour?

Clarke

<{POST_SNAPBACK}>

Now it has but when we first got it it was the same as the dash.

Ian

<{POST_SNAPBACK}>

So, which one did you have Ian, black textured, black smooth or gunmetal grey smooth?

Clarke

BTW... My local Autobarn can get them on order.

[GOLDIE]

gunmetal gray same as dash.

Ian

[stang]

  johng001 said:

  stang said:

I filled up the screw holes and got a spray painter to spay it,definitely get rid of the screw holes

What holds it on if fill in the holes????

  fpvT6 said:

  johng001 said:

  stang said:

I filled up the screw holes and got a spray painter to spay it,definitely get rid of the screw holes

What holds it on if fill in the holes????

The bog he used to fill it

Good question Johng001 and FpvT6,yee of little faith.

The way I did it was on the original facia trim you have little clips that stick out that go into yout ICC trim so I just glued some pins(I actually cut up paper clips)but you get what I mean,now that secures the front .

Then I glued a strap sort of seat belt material about 2 cm wide and 15 cm long and arradited it to the top of the underside of the pod , I then used the screw that holds the ICC trim into the dash and secured the strap to the dash.

Whalla.

[spoonage]

I'm picking up my charcoal grey one tonight, so I'll take piccies tomorrow with the gauges in. I bought Autometer Cobolt boost and AFR gauges. The AFR one is a bit of a wank, but it just is pretty and I don't want to plumb oil into the car with oil temp or anything.

[gotxr6t]

Why not buy electric guage then, sure it might cost a little bit more, but no oil lines have to enter cabin.

[spoonage]

  had08 said:

Why not buy electric guage then, sure it might cost a little bit more, but no oil lines have to enter cabin.

<{POST_SNAPBACK}>

But also the AFR one is pretty