stang Donating Members 1,353 Member For: 21y 23d Location: Melbourne Posted 18/10/05 11:31 AM Share Posted 18/10/05 11:31 AM Good photos and useful info Bugs, good one. Could have cleaned up the engine bay a bit before the last phot though!!!K&N fitted in mine sweet as per original, sure you are not pinching the gasket surround when putting the top on, which I have inadvertently done once?I recall a few months ago that were not into modding the engine and playing it real cool with the mods suggestions - Edit, CAI, wheels, injectors.........give Wog a call he can do you a nice I/c.Hope the family is bearing up well with the new addition.DingahCheers,DingahCleaned up the engine bay?! Mate, I hardly get time to wash the outside of the car these days, let alone the engine bay! Nah, pretty sure it's in there okay. I heard K&Ns weren't too much of a problem, but the BMCs are somewhat thicker I understand. Oh well, it's in one way or another now!Still following my old plan, no major mods at all. Exhaust will remain stock and there'll certainly be no injectors or ICs on the list. CAI and filter were the only other engine mods as the 'Phoon CAI looks pretty stock anyway and I'd hradly call a filter much of a mod. Edit is the only other engine performance mod, and once I get the Wogedit I'll be done. pretty much what I got in mind for mine,if it was phantom they may have been twins. Link to comment Share on other sites More sharing options...
dingah2 Crusty aviator Member 846 Member For: 20y 7m 24d Gender: Male Location: ACT Posted 18/10/05 11:32 AM Share Posted 18/10/05 11:32 AM We'll quote this back to you one day!Dingah Link to comment Share on other sites More sharing options...
bugster70 Donating Members 1,326 Member For: 19y 9m 9d Location: Canberra Posted 18/10/05 12:09 PM Author Share Posted 18/10/05 12:09 PM pretty much what I got in mind for mine,if it was phantom they may have been twins.May I just say what a sensible man you are and what good taste you have! We'll quote this back to you one day!DingahI think I'll be pretty safe mate. You, on the other hand, I'm not so sure about - people in glass houses and all that Mr APS I Don't Trust Edit man!! Link to comment Share on other sites More sharing options...
dingah2 Crusty aviator Member 846 Member For: 20y 7m 24d Gender: Male Location: ACT Posted 18/10/05 08:03 PM Share Posted 18/10/05 08:03 PM Spot on, therein lies the benefits of research to bridge the difference between information, knowledge and understanding....the game aint over yet could be both, might be Edit, could even return to Unichip...let the games begin.!Dingah Link to comment Share on other sites More sharing options...
turbomuz Member 209 Member For: 19y 8m 30d Location: Canberra Posted 18/10/05 10:11 PM Share Posted 18/10/05 10:11 PM Bugster,I did much the same with mine but my cuts nearly went off track because I don't have a mini-hacksaw - I had to hold the blade with my fingers so control was not as good. Luckily after the initial cut and them some sanding it fit nicely. I also had a bit of trouble getting the snorkel off so I could take the airbox out.My thanks to Kaine too as I also used his pictures and measurements. Perhaps he should copyright it and make some money!!Muz Link to comment Share on other sites More sharing options...
turbomuz Member 209 Member For: 19y 8m 30d Location: Canberra Posted 18/10/05 10:16 PM Share Posted 18/10/05 10:16 PM I was looking for this part number as well. I am gonna get one of these. Does anyone in sydney know what dealer doesnt ask for a F6 VIN number to get this part? <{POST_SNAPBACK}>Faygun,I got mine from the dealer in Arncliffe, no questions asked. They are even open on Saturday's. Cost though was $94 which seems to be a bit more than some others are paying.Muz Link to comment Share on other sites More sharing options...
faygun Member 389 Member For: 21y 7m 1d Gender: Male Location: Sydney Posted 18/10/05 11:31 PM Share Posted 18/10/05 11:31 PM I was looking for this part number as well. I am gonna get one of these. Does anyone in sydney know what dealer doesnt ask for a F6 VIN number to get this part? <{POST_SNAPBACK}>Faygun,I got mine from the dealer in Arncliffe, no questions asked. They are even open on Saturday's. Cost though was $94 which seems to be a bit more than some others are paying.Muz<{POST_SNAPBACK}>Turbomuz,I know which dealer you are talking about. The one on princess highway very close to SuperCheap auto. I ll go and check it out this sat. Thanks for that Also does anyone have the link to the instructions page for fitting the Typhoon CAI?Cheers Link to comment Share on other sites More sharing options...
sykes Member 408 Member For: 21y 5m 25d Location: Brisbane (Parkinson) Posted 19/10/05 12:22 AM Share Posted 19/10/05 12:22 AM Great stuff!Can someone post up those gutting sizes and guide as I think I will go this way also.Mick Link to comment Share on other sites More sharing options...
turbomuz Member 209 Member For: 19y 8m 30d Location: Canberra Posted 19/10/05 02:37 AM Share Posted 19/10/05 02:37 AM Turbomuz,I know which dealer you are talking about. The one on princess highway very close to SuperCheap auto. I ll go and check it out this sat. Thanks for that Cheers<{POST_SNAPBACK}>That's not it mate. You are thinking of the Rockdale dealership on Princes Hwy. You need to go a couple of kays further to Arncliffe, it's just off the Hwy at 12-28 Arncliffe Rd. Their number is 8577 4666, give em a call to make sure they have one in stock.Muz Link to comment Share on other sites More sharing options...
bugster70 Donating Members 1,326 Member For: 19y 9m 9d Location: Canberra Posted 19/10/05 03:04 AM Author Share Posted 19/10/05 03:04 AM Great stuff!Can someone post up those gutting sizes and guide as I think I will go this way also.MickSorry, I don't have time to do a big search for Kaine's original post, but I hope he doesn't me posting up a link to the pic he PM'd me...Typhoon CAI templateTrust me, these measurements are and this is all you should really need. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now