Is Running 12.2sec 400m Good ?

[blueboost]

Hi, I have about 275rwk's, and a stall, 10-11 psi, and m/t street radials, and ran 11.7 @114mph, standed auto, with line presure lifted in auto, no c/v problems yet, give you an idea what yours could run when set up,

[Guest xrtwpn]

  Goldbullet said:

  xarh6turbo said:

  AdamXR6T said:

Link why didn't you put the MT's on?

<{POST_SNAPBACK}>

I think cause he couldnt get them over his brakes

<{POST_SNAPBACK}>

I can fit them over my Brembo's

<{POST_SNAPBACK}>

yeah Dave but Potentially your car doesnt need mt street and Potentially you will do a 8 second 1/4 mile when your done with your car and Potentially you will have 800rwkw

Best on congrat you now before you do anything at all

You have a whole lot of Potential there

[Goldbullet]

  xarh6turbo said:

  Goldbullet said:

  xarh6turbo said:

  AdamXR6T said:

Link why didn't you put the MT's on?

<{POST_SNAPBACK}>

I think cause he couldnt get them over his brakes

<{POST_SNAPBACK}>

I can fit them over my Brembo's

<{POST_SNAPBACK}>

yeah Dave but Potentially your car doesnt need mt street and Potentially you will do a 8 second 1/4 mile when your done with your car and Potentially you will have 800rwkw

Best on congrat you now before you do anything at all

<{POST_SNAPBACK}>

I would like to thank you Adam for all of your potential thank's, although I havent achieved anything yet for real, potentially I will as do a lot of people who race thier car's.

Dave.

P.S. I should change to my potential signature too lol.

[JP300]

My Tuner is Jim from Tunehouse in Sydney. The guy knows his stuff ! Every mod was tested on the dyno, we ran them at WSID with real results!

[IceMyButt]

Adam,

Didnt get the MT's on because I went for a 9" rim and the inside of the rim was rubbing on a bolt coming off one of the supension trailing arms We are looking at options to fix the problem - ie. grind the bugger off or turn it around.

The rims fit over the standard brakes alright, but I will probably chuck a 10ml spacer in there as well.

When I get my new Brembos on hopefully everything will still fit

[rushed6]

  jp300+ said:

Guys,

I am new to the forum ... I have had some mods done to my car but I am not sure how my car is going compared to some of the other cars out there.

I ran a 12.2sec 400m, 2.1 60footer and 116mph run at WSID.  That was the first run and snapped an axel in 2nd gear on my second run.  Had to be towed home!

The car has a Haltech Inteceptor, Injectors, Exhaust and an AVO Intercooler kit installed.  Running 15psi on street tyres and BP Ultimate.

How does this compare with some of the other cars & kits out there?

<{POST_SNAPBACK}>

11.23 is better but who is counting

[rboksic]

John,

Looks like Jim is a cappa reseller .

So you going for the edit now?

www.tunehouse.com.au/index.html

Rob

[ZAP]

I am suprised your stock Auto has not died yet

I would get that upgraded before you do anything else or it will go next.

Has anyone tested the new upgraded CV's from Nizpro yet ?

Also good time for your first run

[F6 UTE]

Me, stock tyres and manual are holding back a low 12.. enough of the excuses though, nice time..

Snapping an axle, you must have really hooked up the tyres for that eh!

I assume it's a ute??

Edited 17/11/05 11:01 AM by F6 UTE

[rboksic]

He has a sedan.

Rob