pepe Member 41 Member For: 20y 11m 9d Posted 25/08/05 05:31 AM Share Posted 25/08/05 05:31 AM Hi, Just wondering if anyone has installed a non aps/ pwr intercooler in there t.Ive notice that there are heaps on the market around the $300 mark.Are these efficent and reliable Link to comment Share on other sites More sharing options...
2fardown Member 526 Member For: 19y 6m 17d Gender: Male Location: Brisbane Posted 25/08/05 05:45 AM Share Posted 25/08/05 05:45 AM Add to that the cost of pipe work and your $300 intercooler turns into around $900. ie. the cost of a PWR or similiar direct bolt in replacement. Link to comment Share on other sites More sharing options...
F6 RAPID Formerly Turbo6 Donating Members 2,332 Member For: 21y 10m 21d Location: North Brisbane Posted 25/08/05 08:30 AM Share Posted 25/08/05 08:30 AM You get what you pay for......... Link to comment Share on other sites More sharing options...
dingah2 Crusty aviator Member 846 Member For: 20y 5m 9d Gender: Male Location: ACT Posted 25/08/05 12:44 PM Share Posted 25/08/05 12:44 PM At that price you might as well go the phoon I/c and save on additional plumbing.Dingah Link to comment Share on other sites More sharing options...
F6 UTE - Track Bound EVO III - Member 3,367 Member For: 19y 11m 13d Gender: Male Location: Strapped in and holding on Posted 25/08/05 01:43 PM Share Posted 25/08/05 01:43 PM Spend the $300 on a hooker, you'll get more satisfaction.......... Link to comment Share on other sites More sharing options...
bjc Donating Members 2,823 Member For: 21y 2m 25d Gender: Male Location: Townsville Posted 25/08/05 05:36 PM Share Posted 25/08/05 05:36 PM Go Dynowogs or Street Tuners, for under a grand that's pretty good.I am going to go Dynowogs only because I dont want to grind the chassis as I am installing it myself.If Street Tuner posts up 3 runs back to back on the dyno with heat soak comparison like Dynowog did I may reconsider.Brett. Link to comment Share on other sites More sharing options...
Dannopower Donating Members 421 Member For: 19y 5m 22d Gender: Male Location: Canberra ACT Posted 25/08/05 08:05 PM Share Posted 25/08/05 08:05 PM (edited) $300? gee, I'd be terribly worried about slapping a $300 cooler in my pride and joy.Actually, this is just the thread I was looking for. I know it has been done before, but we weren't all always here before! I'm looking into doing mine sometime. I would definately want a silver colour, and well engineered.Has anyone tried using the latest PWR cooler? They look brilliantly made, just not sure on the results though or price?As far as a Phoon cooler, it seems to me a new one is so expensive when compared to a direct replacement aftermarket one with better results and flow. The only way I would consider a phoon cooler is if it was at the right price (not $1400) Even then, the idea of a second hand cooler for $800 or so, doesnt sit too well when you get the other options new for the $1000. The phoon coolers are pretty well made though.Im just not sure which way to go, as some I have seen have cumbersome pipe attachments on the ends, Others are just way too much for street use involving hacking away half the car, and others are an absolute bugger to fit.Any suggestions? Edited 25/08/05 08:07 PM by Dannopower Link to comment Share on other sites More sharing options...
Guest Guests Posted 25/08/05 10:15 PM Share Posted 25/08/05 10:15 PM Go Dynowogs or Street Tuners, for under a grand that's pretty good.I am going to go Dynowogs only because I dont want to grind the chassis as I am installing it myself.If Street Tuner posts up 3 runs back to back on the dyno with heat soak comparison like Dynowog did I may reconsider.Brett.<{POST_SNAPBACK}>brett yes I did these test's over a std cooler and with the jap cored bar and plate cooler the test were so good due to size and efficiancy of the core!!!I would say that tuner's, rajab's (another good one), monza's (soon to be released and designed by me), pwr's and mine are all within 20% of each other!!!!! Link to comment Share on other sites More sharing options...
Dannopower Donating Members 421 Member For: 19y 5m 22d Gender: Male Location: Canberra ACT Posted 25/08/05 10:22 PM Share Posted 25/08/05 10:22 PM Go Dynowogs or Street Tuners, for under a grand that's pretty good.I am going to go Dynowogs only because I dont want to grind the chassis as I am installing it myself.If Street Tuner posts up 3 runs back to back on the dyno with heat soak comparison like Dynowog did I may reconsider.Brett.brett yes I did these test's over a std cooler and with the jap cored bar and plate cooler the test were so good due to size and efficiancy of the core!!!I would say that tuner's, rajab's (another good one), monza's (soon to be released and designed by me), pwr's and mine are all within 20% of each other!!!!!20%?? Are you referring to Flow?, Effectiveness? Build Quality or Cost? Link to comment Share on other sites More sharing options...
Falchoon I see red Member 5,758 Member For: 21y 11m 12d Location: nowhere in particular Posted 27/08/05 05:42 AM Share Posted 27/08/05 05:42 AM Has anyone tried using the latest PWR cooler? They look brilliantly made, just not sure on the results though or price?<{POST_SNAPBACK}>Saleen fitted a PWR IC to his car recently. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now