Jump to content

Recommended Posts

  • Member
  • Member For: 20y 8m 27d
  • Gender: Male
  • Location: Newcastle NSW

Hi all,

Just finished installing some injectors and re gapping the plugs on a mates ute, I had previously put in the Typhoon CAI and an xede, he Hi-flowed the exhaust and now has the Bosch squirters in there.

He is as happy as a pig in Poo, a nice gentle 11psi tune,( Same tune as what chopper ran a 12.5 on the other night), 270 rwkw on pump BP 98 ultimate.

What gets me is the guy is 70 years old, he loves it, took of with a nice chirp, spinning into second as he merges into the traffic, 70 years old and still a HP freak.

I should mention he also has a 52 ft cruiser that runs two 900hp detroits, tops out at 36knot, this guy loves GO.

So if your in Newcastle, see a really clean white turbo ute with a little grey haired gent behind the wheel, Look out, he may just embaress you. :spoton:

  • Member
  • Member For: 19y 11m 11d
  • Location: Newcastle NSW

Good to hear from someone her in Newcastle. I have had my T for 4 weeks, already have added Typhoon CAI, Filter, Removed ctr Muffler and 18" wheels.

I don't really won't to change anything menchanical ie: injectors, but would like 240rwkw. Is this achieable. If so using/doing what and where.

No one in Newcastle that I have contacted seem interested!

  • Member
  • Member For: 19y 10m 8d

Ill be sure to look out for this car when I drive down to Newcastle next. I'll be driving down pretty much soon as I get my car on the road and running how I want it to. Got a girly I need to visit hehe

  • Member
  • Member For: 21y 10m 6d
  • Gender: Male
  • Location: Newcastle
  LightningXR6T said:
Good to hear from someone her in Newcastle. I have had my T for 4 weeks, already have added Typhoon CAI, Filter, Removed ctr Muffler and 18" wheels.

I don't really won't to change anything menchanical ie: injectors, but would like 240rwkw. Is this achieable. If so using/doing what and where.

No one in Newcastle that I have contacted seem interested!

<{POST_SNAPBACK}>

There's a few people here from Newcastle including me.

There isn't many places in Newcastle I believe that have enough experience with the T to work on them. Fitting upgraded parts etc is fine but when it comes to tuning I'd take it to Sydney.

  • Member
  • Member For: 21y 1m 4d
  • Gender: Male
  • Location: Newcastle

Nice werk on the ute....

Good to see a few fellow novacastrians on the forum....

ute sounds like its gonna have a bit of go...

That makes a few decent powered T's in the area...

Damn I miss mine... :laughing::crybaby:

  • Donating Members
  • Member For: 21y 11m 16d
  FAT-51X said:
Nice werk on the ute....

Good to see a few fellow novacastrians on the forum....

ute sounds like its gonna have a bit of go...

That makes a few decent powered T's in the area...

Damn I miss mine...  :laughing:  :crybaby:

Nice one Eugene.

Some of your special squirters?

  • Member
  • Member For: 20y 8m 27d
  • Gender: Male
  • Location: Newcastle NSW
  SIXRT said:
  FAT-51X said:
Nice werk on the ute....

Good to see a few fellow novacastrians on the forum....

ute sounds like its gonna have a bit of go...

That makes a few decent powered T's in the area...

Damn I miss mine...  :msm:  :msm:

<{POST_SNAPBACK}>

Nice one Eugene.

Some of your special squirters?

<{POST_SNAPBACK}>

Yes they are,

He is over the moon, cant believe dry road, second gear tyre fries froma rolling 60-70kph start, soooo much torque, I now need to fit a Trans cooler so it will last for him. May set up a shift kit module as well.

  • Donating Members
  • Member For: 21y 11m 16d
  Eugene said:
  SIXRT said:
  FAT-51X said:
Nice werk on the ute....

Good to see a few fellow novacastrians on the forum....

ute sounds like its gonna have a bit of go...

That makes a few decent powered T's in the area...

Damn I miss mine...  :spoton:  :spoton:

Nice one Eugene.

Some of your special squirters?

Yes they are,

He is over the moon, cant believe dry road, second gear tyre fries froma rolling 60-70kph start, soooo much torque, I now need to fit a Trans cooler so it will last for him. May set up a shift kit module as well.

Geez,

You are getting pretty good at installing and setting up tunes for these. Any additional upgrades to yours planned?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'