Dyno Day

[gtrken]

Have rechecked the data and there is a glitch. The temp should have been around 22-23 deg which allowing for correction gives it about 410-420rwhp.

Still impressive though..

All the other cars run had no problem so I have NFI

Advantage of Shootout is those glitches are avaliable and displayed on the graph.

And no, I don't know what happened as the exhaust is on the other side and even if the probe was touching the radiator it wouldn't read that high .

Weird and we are checking with Dyno Dynamics.

Sorry about that and apologise to Louie for giving him false hope.

We will happily redyno at his convenience and get a correct power figure.

Cheers

ken

[Xtreme F6]

  gtrken said:

Have rechecked the data and there is a glitch. The temp should have been around 22-23 deg which allowing for correction gives it about 410-420rwhp.

Still impressive though..

All the other cars run had no problem so I have NFI

Advantage of Shootout is those glitches are avaliable and displayed on the graph.

And no, I don't know what happened as the exhaust is on the other side and even if the probe was touching the radiator it wouldn't read that high .

Weird and we are checking with Dyno Dynamics.

Sorry about that and apologise to Louie for giving him false hope.

We will happily redyno at his convenience and get a correct power figure.

Cheers

ken

Ken, I told lewy when he rang me it wasnt real so hes already been deflated lol

dont worry mate, alot of cars being rushed through, you cant be perfect all the time

[Milz]

so wat sort of power did ZMAN (zoran) and XTRmn8 (goran) make?

[F6_Tornado]

  turbo xr said:

so wat sort of power did ZMAN (zoran) and XTRmn8 (goran) make?

<{POST_SNAPBACK}>

Try here it has the results:

http://www.fordxr6turbo.com/forum/index.ph...ndpost&p=271331

Edited 11/07/05 06:11 AM by F6_Tornado

[Romulus]

  V8_FRD said:

sh*t that gets quite steep at the start dosent it. By 3000 rpm your making about 220 RWKW which would make launching hard very fun. Thankfully it starts to flatten out though, would be a woot to drive I bet

<{POST_SNAPBACK}>

Yeah, it's a lot of fun. The car has an appetite for rear tyres now! The power flattens out due to the valve springs not coping, should have that rectified soon.

[Romulus]

  XRT UTE said:

  M6 XR6T said:

Here's my dyno sheet, showing the 10 psi and 14 psi programs.

Got to agree with Swanga's and XRT UTE's comments that you hear different opinions from people about performance shops. Find one you like and use them.

There's a few to choose from now so your choices should be easy.

<{POST_SNAPBACK}>

Can you post up the one from the Huyperdrive day, then we can compare YTRY4 from the 'other' dyno..

Cheers..

Here's our Ute's from the other place..

<{POST_SNAPBACK}>

Here it is.

Still waiting for the YTRY4 sheet from D & T.

[Milz]

so when is the next street cruise?how often do use have these sort of events?

[F6 UTE]

  M6 XR6T said:

Here it is.

Still waiting for the YTRY4 sheet from D & T.

<{POST_SNAPBACK}>

Valid point.

GTP-330, get onto your rev head mate, tell him to get the thing off the wall and post it up..

[XtRmn8]

  turbo xr said:

so wat sort of power did ZMAN (zoran) and XTRmn8 (goran) make?

My car made 182.5RWHP (NA 6 with intake as per sig). Zoran's car made 233.8RWHP, pretty sure its a dead stock auto.

[XtRmn8]

  XRT UTE said:

  M6 XR6T said:

Here it is.

Still waiting for the YTRY4 sheet from D & T.

Valid point.

GTP-330, get onto your rev head mate, tell him to get the thing off the wall and post it up..

Hot of the press.............