benmwhite Donating Members 143 Member For: 20y 10m 25d Gender: Male Location: Toowoomba Posted 22/05/05 04:41 AM Share Posted 22/05/05 04:41 AM Hi guys - In prep for my Phase 2 installation on my ute, I have had the valve springs replaced and the auto mod done.Have to say that I am a bit disappointed though and want to hear from anyone who has had the mod done to their auto "T".I was under the impression that in "grandpa mode" (standard drive) that very little should change with smooth changes between ratios. I expected a bit of a boot between ratios for when the performance shuttle was selected... but...In Standard and Performance mode all of the shifts are really rough - to the point where my better half is asking "you paid $660 for this????" - and I have to agree - now I'm driving like a grandpa coz I dont want to break anything!Also in standard drive mode from a standing start, the engine revs spin right up as though a clutch is not engaging??? - Definitely much slower off the mark - to the point where it is embarrasing!!!Help me out please if you have had the mod done - is this normal??? Am beginning to wish I hadn't touched the thing!!! Link to comment https://www.fordxr6turbo.com/forum/topic/17783-auto-mod-experiences/ Share on other sites More sharing options...
sutty Mushroom Donating Members 799 Member For: 20y 11m 5d Gender: Male Location: THORNLANDS, QLD Posted 22/05/05 05:19 AM Share Posted 22/05/05 05:19 AM benmwhite said: Hi guys - In prep for my Phase 2 installation on my ute, I have had the valve springs replaced and the auto mod done.Have to say that I am a bit disappointed though and want to hear from anyone who has had the mod done to their auto "T".I was under the impression that in "grandpa mode" (standard drive) that very little should change with smooth changes between ratios. I expected a bit of a boot between ratios for when the performance shuttle was selected... but...In Standard and Performance mode all of the shifts are really rough - to the point where my better half is asking "you paid $660 for this????" - and I have to agree - now I'm driving like a grandpa coz I dont want to break anything!Also in standard drive mode from a standing start, the engine revs spin right up as though a clutch is not engaging??? - Definitely much slower off the mark - to the point where it is embarrasing!!!Help me out please if you have had the mod done - is this normal??? Am beginning to wish I hadn't touched the thing!!!Who did the mods to your auto? I didn't think there was anyone in QLD that does a good job on the BA auto. $660 is bloody cheap too. Nizpro want around $3000 (done through Amberly Auto Melb.). I also believe Kewish in Melbourne are very good and a fair bit cheaper - this is where I'm heading when I've saved my pennies. Link to comment https://www.fordxr6turbo.com/forum/topic/17783-auto-mod-experiences/#findComment-255564 Share on other sites More sharing options...
TTJET New Member 7 Member For: 20y 2m 5d Posted 22/05/05 05:29 AM Share Posted 22/05/05 05:29 AM is it true that there is an preassure adjustment in the auto that you can get at when you pull the pan off, as one of my friends works at an auto trans workshop and they said thet that they think that there is the same as the AU series falcons Link to comment https://www.fordxr6turbo.com/forum/topic/17783-auto-mod-experiences/#findComment-255568 Share on other sites More sharing options...
benmwhite Donating Members 143 Member For: 20y 10m 25d Gender: Male Location: Toowoomba Posted 22/05/05 05:34 AM Author Share Posted 22/05/05 05:34 AM Took it to CNJ at Underwood - nice blokes who seem to know thier stuff... thought that the prices I paid sounded about right given the numbers quoted on the APS forum... - I'll give the boys there a call tomorrow too - they might have some more info I can post..."Approximate additional costs:Valve springs (recommended for APS Phase I, II and III systems): $880 Automatic transmission upgrade (recommended for APS Phase II and III): $700 {minimum price, depending on Automatic transmission condition}Engineering certificate (recommended for keeping modifications legal): $700 "the ute has been treated softly and only has around 28,000k's on it so I thought that it would come in at the bottom end of the scale??... Link to comment https://www.fordxr6turbo.com/forum/topic/17783-auto-mod-experiences/#findComment-255569 Share on other sites More sharing options...
Buf-Phoon loitering with intent Lifetime Members 13,318 Member For: 21y 8m 1d Gender: Male Location: Zombie Birdhouse Posted 22/05/05 05:52 AM Share Posted 22/05/05 05:52 AM benmwhite said: In Standard and Performance mode all of the shifts are really rough - to the point where my better half is asking "you paid $660 for this????" - and I have to agree - now I'm driving like a grandpa coz I dont want to break anything!Also in standard drive mode from a standing start, the engine revs spin right up as though a clutch is not engaging??? - Definitely much slower off the mark - to the point where it is embarrasing!!!Help me out please if you have had the mod done - is this normal??? Am beginning to wish I hadn't touched the thing!!!<{POST_SNAPBACK}>Mate , I have basic valve body & line pressure mods, and tranny cooler hooked up to my phase 2. Also I change tranny fluid every 15000ks.So far no nasty bits in the drained fluid, though I am not hard on the car in most instances.When driving normally changes are a bit firmer than stock but still pretty smooth.But once you push the loud pedal particularly in perf mode changes are a lot harder. Sounds like to me that you need to take it back and get it checked out as the box should engage straight away Hope this helps and you get it sorted ASAP.PS if you are going to give it heaps you should consider getting the clutches and bands done. A cooler is a must to prolong the longevity of the Auto Link to comment https://www.fordxr6turbo.com/forum/topic/17783-auto-mod-experiences/#findComment-255574 Share on other sites More sharing options...
benmwhite Donating Members 143 Member For: 20y 10m 25d Gender: Male Location: Toowoomba Posted 23/05/05 01:21 AM Author Share Posted 23/05/05 01:21 AM Thanks WhiteTee - yeah got it booked back in for wednesday so will post the verdict incase anyone else has a similar issue...am sure its just something simple. - thanks for the tip on the cooler - am thinking this would be a good idea - what sort of $ would you expect to pay for this? Link to comment https://www.fordxr6turbo.com/forum/topic/17783-auto-mod-experiences/#findComment-255775 Share on other sites More sharing options...
benmwhite Donating Members 143 Member For: 20y 10m 25d Gender: Male Location: Toowoomba Posted 25/05/05 06:20 AM Author Share Posted 25/05/05 06:20 AM WhiteTee - right on the money there - looks like one of the bands was slipping so its been shimmed and things are much better for the time being - eventually it will need an overhaul - guess that will depend on how I drive it..Blokes at CNJ were really accommodating, they use a crew at Underwood who do the mods so took me around there and they took it for a spin... initially thought that it might be low on fluid but after a look could see where the band had been slipping - an additional 1.5mm tolerance to what it should be.This being said - with only around 30,000k's on it, in hindsight I should have had the bl00dy thing done under warranty prior to having the mods made, obviously the belt was already loose... so there’s the moral to the story - If you’re going to get the trans modified, suss it out first - if there is evidence of belt slip - get that sorted out under warranty first - then do your mods...nothing like hindsight..... Link to comment https://www.fordxr6turbo.com/forum/topic/17783-auto-mod-experiences/#findComment-256422 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now