puffnstuff Member 287 Member For: 22y 29d Posted 19/05/05 10:04 PM Share Posted 19/05/05 10:04 PM Hi chasps... OK - MissT has just been in for her 30K service. All sweet. They fixed the exhaust rattle, tightened the front submember that was (apparently) loose and reflashed the PCM (even though I expressly asked them not too!).Now they claim the front pads and rotors are worn below spec and must be replaced !!! after 30K !! are the rotors made of cheese ??? I ask you.They ask $750ea for front rotors and $305 per set for pads - all OEM. total $1994ish. YIKES !!!So I think to myself....'self' sure I can do this a little cheaper than that.Today I surf PBR - Harrop - and any one else who comes up under google !Any one on the forum care to offer some suggestions ?Remember I'm South Australia based so any clever ideas that involve driving the car interstate will be daintily side stepped out of expediency...cheers to the forum Link to comment Share on other sites More sharing options...
ktford FORD FORD FORD Donating Members 9,390 Member For: 21y 8m 13d Gender: Male Location: Victoria Point In Brissy's eastern side Posted 19/05/05 10:11 PM Share Posted 19/05/05 10:11 PM Contact bcr01 for additional options Link to comment Share on other sites More sharing options...
Chris xr6 Member 376 Member For: 20y 8m 1d Location: Shire Posted 19/05/05 10:29 PM Share Posted 19/05/05 10:29 PM DBA 4000 rotors for you car part number 42104 will cost around $200.00 per corner probably less and look to ferodo for pads preferably DS2500 expect the same cost $200.00 per axleDBA 4000 Catalogue Link to comment Share on other sites More sharing options...
Cro Flower Power Lifetime Members 6,114 Member For: 22y 1m 20d Gender: Male Location: Sydney Posted 19/05/05 11:47 PM Share Posted 19/05/05 11:47 PM The DBA's would be more expensive for your car PuffnStuff as you got the premium brakes or at least I think you do.I'm up to 42,500 on mine and I'll probably get a note saying my rotors need replacing at the 45k service (although the groove is still there).I can save you money on the pads if you want. I have some genuine Ford Premium brake pads, the same ones they are going to give you. They have 1mm missing (they come with 7mm) as they've done 5,000 kms (mostly hwy).Shouldn't cost too much to freight them down to Adelaide, and I'll let em go for $150 + freight (negotiable) if you're interested.that's half the price you've been quoted for just 1mm worn. Link to comment Share on other sites More sharing options...
F6 RAPID Formerly Turbo6 Donating Members 2,332 Member For: 21y 10m 23d Location: North Brisbane Posted 19/05/05 11:47 PM Share Posted 19/05/05 11:47 PM Contact bcr01 for additional optionsWhat Scotty said. I put on the whole performance kit from PBR and thus far are light years ahead of the OEM brakes. The track day next weekend will soon sort them out............PM bcr01 for supply. Link to comment Share on other sites More sharing options...
Lord Cyric Just sit back and enjoy the ride...! Donating Members 1,121 Member For: 21y 3m 6d Gender: Male Location: Sydney, NSW Posted 19/05/05 11:48 PM Share Posted 19/05/05 11:48 PM Contact bcr01 for additional optionsDitch the crapfest that are the standard brakes and put in a a set of PBRs. Cost me $1750 including delivery plus about $300 to install at my local Midas shop (with brand new Super DOT4 fluid). Link to comment Share on other sites More sharing options...
puffnstuff Member 287 Member For: 22y 29d Posted 20/05/05 01:01 AM Author Share Posted 20/05/05 01:01 AM Just checking before I surf some more...Thanks CRO for the offer. Give me another day or so to pursue some upgraded bits and bobs. If it all works out too expensive I may just take you up on your offer and throw them on with the original disks. Not a perfect solution as I like MissT to be just 'so'.thanks all for the responses so far... Link to comment Share on other sites More sharing options...
Chris xr6 Member 376 Member For: 20y 8m 1d Location: Shire Posted 20/05/05 06:52 AM Share Posted 20/05/05 06:52 AM DBA 4000 rotors for you car part number 42104 will cost around $200.00 per corner probably lessDBA 4000 Catalogue<{POST_SNAPBACK}>Not for Premium Brakes! That would be for the Standard T Brakes.I can supply Pads and Rotors for both Premium and Standard Brakes<{POST_SNAPBACK}>I have been quoted $223 from repco for those discs last time I was looking around Link to comment Share on other sites More sharing options...
ENVY-T CNUTOX Donating Members 3,098 Member For: 21y 10m 25d Gender: Male Location: Not sure? Posted 20/05/05 07:49 AM Share Posted 20/05/05 07:49 AM I was quoted 660 fitted price for dba slotted rotors, 325mm x 32mm with bendix ultimate performance pads. It was if I remember about 220 a corner for the rotors and about 180 for the pads. Link to comment Share on other sites More sharing options...
built2redline Member 187 Member For: 19y 6m 25d Location: sh*tney Posted 20/05/05 08:39 AM Share Posted 20/05/05 08:39 AM I picked up DBA slotted rotors for the XR6t and Bendix Ultimate Brake padsrotors $155/side..pads $150/both sides... discounted from $205total $460 for the front upgradeinstallation $0any monkey with a wrench can do it Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now