Ase Upgrade Intercooler

[Street Tuner]

Saleen, our straight fit intercooler is the best intercooler. Why? Because its the only one with any research and development behind it. Contact all those selling them for a data sheet, and see what you get.

[bjc]

F#ck it, add me to the list of buyers please. And make mine Black thanks.

I am in Townsville so how much for delivery?

And whats the go now as far a paying up.

Thanks, Brett.

[Romulus]

And here's me thinking this is a Street Tuner topic posted in the CAPA section about an intercooler he's marketing......

What's next, a post about Supercheap intercoolers?

[Street Tuner]

[back to the intercooler.....

Our core is manufactured in South Australia by ADRAD. It is a tube and fin core, which any of you can watch being extruded if you happened to get a site pass for their factory and wanted to spend the time. End tanks are pressed with a special tool for the XR6 turbo, which is why they are sleek, one piece things, rather than welded together 'cake tin' style tanks like some others on the market. The result is less pressure drop, which in turn creates more power. None of this is rocket science. Its just good product engineering versus cheap product engineering.

Edited 18/06/05 11:17 PM by bcl

[boomer01]

Hi,

Again I'm no Oracle on the subject...With regards to intercoolers what is more advantageous, Tube & Fin or Bar & Plate?

Regards,

Tom.

[bcl]

Hi,

Again I'm no Oracle on the subject...With regards to intercoolers what is more advantageous, Tube & Fin or Bar & Plate?

Regards,

Tom.

<{POST_SNAPBACK}>

Tom,

Do some research, and we had threads on this elsewhere.

This whole thread is being tidied up.

If you want to discuss other products do it in another thread, and not in this CAPA forum.

Brian

[boomer01]

Hi,

Again I'm no Oracle on the subject...With regards to intercoolers what is more advantageous, Tube & Fin or Bar & Plate?

Regards,

Tom.

<{POST_SNAPBACK}>

Tom,

Do some research, and we had threads on this elsewhere.

This whole thread is being tidied up.

If you want to discuss other products do it in another thread, and not in this CAPA forum.

Brian

<{POST_SNAPBACK}>

Will do.

Cheers,

Tom.

[bjc]

I can't decide? Both sound extremely good for direct fitments.

I will wait for a week or so before choosing, hopefully a few will have been fitted by both parties so keep us informed fellas.

Brett.

[Romulus]

Some more pics of the intercooler....

Haven't been able to dyno the car yet as the clutch has let go - I'm having to potter the car around with the stock program until it arrives next week. I've ordered the SMB 4" dump pipe and SMB 4" cat, so I'll have that fitted shortly then dyno the car with the 6 psi program, 10psi program and the 15psi program.

[saleen]

M6. Is the intercooler crooked? It kinda looks funny. I hope you get good results out of it.