Headsex Donating Members 2,528 Member For: 19y 4m 9d Gender: Male Location: Melb Posted 07/03/12 10:14 AM Share Posted 07/03/12 10:14 AM (edited) P.S I was just reading on another forum themanwhocannotbenamed has a 4spd powerglide ??? and is racing very shortly...AFF! Something like powerglide internals in his BTR or something?? Farked if I know...Did they take 2 gears out of his 4speedFrom a xr6 tornado to a 4spd powerglide.. Why does he always put 2 different things together..He is retarded. Bayswater automatics are still doing his box, and throughout his various power levels, he ALWAYS manages to burn out his c1 clutch (the clutch that applies in 3rd gear, and stays on for 4th). Its funny that even with less power than other cars, he still manages to burns it out.What Phil is attempting to do is machine the c1 drum and with some custom wizardry put in a powerglide hub, and powerglide frictions.The goal of this is to fit 7 or 8 frictions, over the original 5 (or 6), which already have a larger surface area than the normal BTR.Result being approx 40% more capacity, and it will tollerate slippage more (like a ZF does in comparison)Downside .... I can see a snapped intermediate shaft in the near future...As for the word powerglide making it sound bulletproof, pffft. its only got powerglide spec frictions, on a powerglide hub..Does it increase the strength? No.Does it increase the slip capacity of 3rd gear, and the slipping its currently being given.. Yes.Im sure playing with the tuneup, torque figures, shift ramps, and shift presures would fix his problem... But you'd have to know whats going on to fix that.Hey FKMF6,are you the original owner of the white BF F6 from a couple years back?Yes he is Edited 07/03/12 10:15 AM by Headsex 3 Link to comment Share on other sites More sharing options...
MexicanBatman G666E Turbo!!! Member 1,008 Member For: 14y 11m 3d Gender: Male Posted 07/03/12 10:50 AM Share Posted 07/03/12 10:50 AM When Chuck Norris tightens my intercooler clamps, I'll be able to run 900psi boost and smash anything, but till then ill just have to stay on the low tune, cos I don't wanna pop hoses off... 1 Link to comment Share on other sites More sharing options...
Shyfrd Turboless Donating Members 5,992 Member For: 13y 9m 22d Gender: Male Location: Geelong, Victoria Posted 07/03/12 10:50 AM Share Posted 07/03/12 10:50 AM (edited) haha headsex got the answers for everything LOL tra1nr. I think henz's story about his mate doing something similar would fit well with that pic hahabatman, sounds like a case of too much power for intercooler hahaha Edited 07/03/12 10:51 AM by Shyfrd Link to comment Share on other sites More sharing options...
etrocket Member 1,382 Member For: 14y 8m 20d Gender: Male Posted 07/03/12 11:05 AM Share Posted 07/03/12 11:05 AM Batman sounds like Dre - must have 10 different tunes lol 1 Link to comment Share on other sites More sharing options...
FRF6 Member 8 Member For: 12y 9m 13d Posted 07/03/12 11:31 AM Share Posted 07/03/12 11:31 AM R35 Link to comment Share on other sites More sharing options...
freeze_dk I am dissatisfied with my current employment situation Donating Members 8,610 Member For: 18y 2m 21d Gender: Male Posted 07/03/12 11:32 AM Share Posted 07/03/12 11:32 AM Pics Link to comment Share on other sites More sharing options...
FRF6 Member 8 Member For: 12y 9m 13d Posted 07/03/12 11:33 AM Share Posted 07/03/12 11:33 AM What do you have frf6?R35 Link to comment Share on other sites More sharing options...
JETFPV Donating Members 672 Member For: 17y 1m 14d Gender: Male Posted 07/03/12 11:39 AM Share Posted 07/03/12 11:39 AM JETFPV what are u doing with the rear end on the Capri?Complete new rear end basically mate...It is getting fully engineered for all this and the engine conversion so it is fairly costly, but minitub's and rear leaf spring's moved in board, brand new 9 inch moly housing or possibly a sheetmetal housing (undecided yet), strange or romac full floater's, strange or romac floating 35 spline billet axles, brand new ventilated disc brake rear kit with inbuilt handbrake, strange nodular iron centre, 35 spline moser true track centre, strange double adjustable alloy shocker's, braided brake line's, handbrake etc made to suit, 15x10's either Alumastar's which I have already or possibly Convo's again in 15x10, slick size will be 28x11.5x15's and for street 325/50/15 ET Street's...Beleive it or not im also having ABS fitted while it's in there which run's no booster, just a master on firewall and a little pump under the dash... 1 Link to comment Share on other sites More sharing options...
FRF6 Member 8 Member For: 12y 9m 13d Posted 07/03/12 11:39 AM Share Posted 07/03/12 11:39 AM from the lights yeah, no roll ons daytona style bullsh*tLighs rollings u name it no chance is your car????? Link to comment Share on other sites More sharing options...
FKMF6 Member 26 Member For: 16y 3m 16d Gender: Male Location: melbourne Posted 07/03/12 11:40 AM Share Posted 07/03/12 11:40 AM Hey FKMF6,are you the original owner of the white BF F6 from a couple years back?yeah mate 3yr ago now Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now