Jmpin Member 111 Member For: 17y 2m 25d Gender: Male Location: South Coast NSW Posted 04/03/08 08:33 AM Share Posted 04/03/08 08:33 AM I did it myself took about 1.5hrs.. part cost me $36 so it worked out ok.... stupid that I needed to buy cable and all for a handle.that's ford build quility for us hay. Link to comment Share on other sites More sharing options...
austcro Member 47 Member For: 17y 5m 24d Gender: Male Location: Canberra Posted 04/03/08 08:50 AM Share Posted 04/03/08 08:50 AM Has happened to me twice, and only when I pop the hood to show off the engine bay. Fraud have fixed it both times under warranty, though that'll be coming to an end in 12 months or so. If it fails again under warranty, I'll get it fixed again and come up with something more "permanent".Maybe it'd be worth cnc'ing something up. Link to comment Share on other sites More sharing options...
castro7 rob327 Member 227 Member For: 16y 9m 12d Gender: Male Location: Sydney NSW and Bribie Island QLD Posted 19/03/08 02:51 AM Share Posted 19/03/08 02:51 AM my bonnet release came out of its slot once when I was opening it... I slid it back in but it comes out everytime you pull it.... at the moment ive got it tucked up behind some other wiring there so it doesnt dangle near my foot while im driving.... I'll get it fixed next service...I think the heat buggered the release or the slot it sits in... because the plastic is out of shape around the edges... Link to comment Share on other sites More sharing options...
rhysy_boi Member 83 Member For: 18y 5m 11d Gender: Male Location: Perth, WA Posted 20/03/08 01:40 PM Share Posted 20/03/08 01:40 PM mines done it and the cable seems tight as now that I've set up the rubber the bonnet sits on so it's straight left and right. gonna get a panel beater/mechanic to look at it and replace the handle/cable. it's $28 trade at coventriesRhys Link to comment Share on other sites More sharing options...
dev33 Member 44 Member For: 17y 10d Gender: Male Location: Rockhampton CQ Posted 02/05/08 01:14 PM Share Posted 02/05/08 01:14 PM My bonnet release handle came out of the plastic it sits, turns out it snapped the plastic tabs in the housing. Got a new one put in this arvo set me back $170 because it is attached to the fuse box, apparently, and only available from ford. Long story short I tried it at the mechanics worked awesome got home to show the misso and I broke the bloody thing again. Hahaha gotta laugh about it not much else you can do. Going to see the mechanic tommorrow. Has anyone tried tomodify the factory fittings to make them stronger? Link to comment Share on other sites More sharing options...
Ghia Member 191 Member For: 22y 17d Gender: Male Location: Aus.Vic.Melb Posted 03/05/08 04:26 AM Share Posted 03/05/08 04:26 AM My bonnet release handle came out of the plastic it sits, turns out it snapped the plastic tabs in the housing. Got a new one put in this arvo set me back $170 because it is attached to the fuse box, apparently, and only available from ford. Long story short I tried it at the mechanics worked awesome got home to show the misso and I broke the bloody thing again. Hahaha gotta laugh about it not much else you can do. Going to see the mechanic tommorrow. Has anyone tried tomodify the factory fittings to make them stronger?Yeah, I had that exact same problem, damn tabs on the bottom of the fuse box broke - PITA Link to comment Share on other sites More sharing options...
dev33 Member 44 Member For: 17y 10d Gender: Male Location: Rockhampton CQ Posted 07/05/08 10:29 AM Share Posted 07/05/08 10:29 AM Got the holder fixed again but for free this time, thank god.My maniac had to replace the actually cable because it had broken one side on the handle and when I had tried to use itthere was to much pressure on one side and boom broke the new housing. Hopefully it'll last for a while cause that's $$$that could have been spent on a 'zorst. All good Link to comment Share on other sites More sharing options...
Erko Donating Members 1,079 Member For: 21y 2m 23d Gender: Male Location: Sydney Posted 07/05/08 11:39 AM Share Posted 07/05/08 11:39 AM lame ford engineering.my farken cable stretched! had to be replaced with a retrofit part of heavier gauge cable. Link to comment Share on other sites More sharing options...
xr6turboman Donating Members 588 Member For: 16y 8m 12d Gender: Male Location: New Zealand, Palmerston North Posted 11/09/08 12:08 AM Share Posted 11/09/08 12:08 AM the other day I went to pop bonnet to check the normals... and hello broken bonnet release thingy. what do I have to do to fix it... and how much will it cost me roughly..? and another thing... (don't think I'm a rough guy) lol but in my utes seat the leaver you pull to fold the chair forward has also broken I've had a pretty good look at it in and its like a little white clip has broken. been to ford and they didn't have a clue what the part was - the guy said you probably have to buy the base of the seat for $1100 lol need I say its still broken lol I could go buy 2 seats in leather from a wrecker for that and still have change any ideas? warrants comming up fast and it will fail. thanks ben Link to comment Share on other sites More sharing options...
Jafxr6t Member 89 Member For: 17y 7m 3d Gender: Male Location: West Lake Macquarie Posted 11/09/08 02:34 AM Share Posted 11/09/08 02:34 AM Mine broke once. Fraud replaced it under warrenty. Aparently they had "revised" the system and replaced the whole bonnet release system. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now