geea Site protagonist Lifetime Members 4,320 Member For: 21y 7m 8d Gender: Male Location: At the lights, waiting for you. Posted 26/03/05 05:33 AM Share Posted 26/03/05 05:33 AM Just got back from EasterNats and I'm a little disappointed. I was hoping to do ok in the dyno comp but the car didn't read very high. The dyno comp is run by Mike's Dyno Tuning in Dandenong and they apparently can measure fwkw's on a chassis dyno. He said it was real acurate on manuals but was sometimes a little out on autos. He gave me a reading of 339.6fwkw's. I believe that I have 328.7rwkw's.If this is correct then I must be a legend to be able to get 1850kg (car fuel and me) down the 1/4 mile with a 123mph. I tried explaining that the car must have more and that the dyno was reading wrong. He said there is a small margin for error in the auto's. I pointed out what the car had done on the track and said if he still thought what the dyno said was correct. He said if that's what the dyno said that's what the car has. I pointed out that the car also had a 2700stall and he said that would have a little affect but that 339.6fwkw's would still be pretty acurate.Talk about a complete idiot. He even had a mate there trying to support him and telling me about various other cars that were also running mid 11's with 340fwkw's. Wghen I asked what sort he said VL Commadore's and similar. I pointed out that my car was 400kg heavier and he just said that the dyno is correct.I'm not happy and would like to be able to do something to rectify this but don't think I have any options. What are peoples thoughts?Geea. Link to comment Share on other sites More sharing options...
jetute Donating Members 4,553 Member For: 20y 10m 19d Gender: Male Location: brisbane Posted 26/03/05 05:44 AM Share Posted 26/03/05 05:44 AM 339fwkw I have been in this car and it definately has a crapload more then that!!!to the guy that ran the dyno Link to comment Share on other sites More sharing options...
maximum_velocity Lemming No #5 Member 1,991 Member For: 20y 27d Gender: Male Location: Endeavour Hills, Victoria Posted 26/03/05 05:45 AM Share Posted 26/03/05 05:45 AM Craig I have had Mikes dyno tuning do some work on my car in the past and I tell you now dont listen to wat they have to say.I dont know sh*t all about dynos but I still think I know more than them.I think a good way to shut him up would be to bring your byno sheets and show them to him and see wat he says.Remember to point out that HPF are a very credited place (alot more so then mikes dyno tuning that's for sure).I had my car dynoed there a while ago just after I ran a 13.56 second pass and the dyno read 121 rwkw. I havent had my car drynoed since but I know it takes alot more power than that to run a mid 13 sec pass.Hope this helps and look forward to seeing you at the nats Link to comment Share on other sites More sharing options...
xrdreaming Lifetime Members 1,693 Member For: 21y 10m 21d Gender: Male Location: Melbourne Posted 26/03/05 05:47 AM Share Posted 26/03/05 05:47 AM I think you should have taken Nick and his dyno! Link to comment Share on other sites More sharing options...
Guest xrtwpn Guests Posted 26/03/05 06:00 AM Share Posted 26/03/05 06:00 AM LOL what a dickDont worry about it criag you know what your car can do you have nothing to prove to themvl's only needs about 300fwkw to run a high 10 so they are wrong everywhere Link to comment Share on other sites More sharing options...
thebrunks Member 665 Member For: 20y 5m 10d Location: Gold Coast Posted 26/03/05 07:05 AM Share Posted 26/03/05 07:05 AM This guy must be a tosser, 10kw loss through the drive train in an auto!!!Just common sense will tell you that you lose at least 30-40 kw.Russ Link to comment Share on other sites More sharing options...
Guest TRACK Guests Posted 26/03/05 07:15 AM Share Posted 26/03/05 07:15 AM He sounds like some of the clowns down at Ford CRC. Full of Sh1t, and contiues to stick to his storey even though you point out plain logic says he's wrong!Maybe he used to work for Ford? Link to comment Share on other sites More sharing options...
macka'sxr6t Member 1,480 Member For: 20y 6m 23d Location: Mildura Posted 26/03/05 07:23 AM Share Posted 26/03/05 07:23 AM Maybe he used to work for Ford?<{POST_SNAPBACK}> macka Link to comment Share on other sites More sharing options...
geea Site protagonist Lifetime Members 4,320 Member For: 21y 7m 8d Gender: Male Location: At the lights, waiting for you. Posted 26/03/05 07:28 AM Author Share Posted 26/03/05 07:28 AM I know that I shouldn't let it get to me, but I am. I hate being hard done by. Usually when I'm hard done by I'm able to rectify the situation. I don't see any way where I can do that in this instance, too many witnesses. Geea. Link to comment Share on other sites More sharing options...
FPVPSI Member 503 Member For: 21y 10m 4d Gender: Male Location: Victoria Posted 26/03/05 09:26 AM Share Posted 26/03/05 09:26 AM (edited) Saw the run...thought it was abit weird...I was thinking oohh this is going to put down some sweet numbers (not that 339 is bad) but it didnt do what I was expecting...Another weird senario was with the white Corty with the blower hanging out...number plates "Tuf-TF" or sumthing...anyways he only managed to get 330fwkw's and only 530nm!!! I mean come on...this is a supercharged 378 with all the go fast bits under the sun...and it only manged 330... ...I say their dyno's wayyyyy off...Hey V8_FRD what plates you got on ya car mate? Asking cause theres afew XE utes and stuff...just thought I introduce maself...P.S - I was going to say hi Geea but u looked abit peed off (and so u should be!)......I'll come say hi if I see ya tomorrow...and hopefully get a better look at your monster.... Edited 26/03/05 09:31 AM by FPVPSI Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now