GR8XR6 ANGEL EYES Silver Donating Members 1,683 Member For: 16y 4m Gender: Male Location: SE Suburbs, Melbourne Posted 21/07/09 03:58 PM Share Posted 21/07/09 03:58 PM I can feel more illumination coming once the coolers installed. LOL Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 16y 11m 29d Gender: Male Location: Probably above atmospheric pressure Posted 23/07/09 02:40 PM Share Posted 23/07/09 02:40 PM The more the merrier! Link to comment Share on other sites More sharing options...
RHR BOOST Moderating Team 5,698 Member For: 21y 2m 17d Gender: Male Location: Southern Highlands NSW Posted 31/01/10 08:04 AM Share Posted 31/01/10 08:04 AM So can we confirm if an Fg with premo sound has them like the Ba-f's Link to comment Share on other sites More sharing options...
XR64T Are we there yet? Donating Members 703 Member For: 21y 1m 23d Gender: Male Location: Sydney, NSW Posted 01/02/10 12:40 PM Share Posted 01/02/10 12:40 PM Just check mine and they sure do Robbo Drivers side is in the same place (under the fuse panel), but the passengers one is a little different. In my old BA it was under the glovebox but in the FG it is behind the glovebox. You have to release the top catch on the glovebox so that it drops down and the connector and socket are behind it. Looks like the light would shine down through a small hole in the plastic to iluminate the footwell area.I am guessing it won't light up as much as the BA ones did on the passenger side as it only comes through a small hole in the plastic. I only had one spare bulb and I already installed it in the drivers side so I couldn't be arsed to pull it out and stick in the passengers side to check how it looks.I will get some from the servo tomorrow... I think if I remember from my BA the 3W are a bit dull and you need 5W to work well.Cheers,Aaron Link to comment Share on other sites More sharing options...
Stazza_Brendan Donating Members 686 Member For: 15y 1m 11d Gender: Male Location: Mackay QLD Posted 05/02/10 01:49 PM Share Posted 05/02/10 01:49 PM I have a BF mk2 ute with premium sound, dual zone climate control, leather pack, and no footwell illumination. Anyone know if theres a wiring loom you can connect into or is the footwell illumination built into the loom. Link to comment Share on other sites More sharing options...
Dillby777 Member 6 Member For: 15y 24d Gender: Male Posted 28/09/10 06:46 AM Share Posted 28/09/10 06:46 AM My T doesn't seem to have the globe socket so I was wondering if any one can tell me what colour wires are feeding into the back of the socket. I presume that the wire's are in the harness without the globe socket. If that is the case it is just the matter of ordering a socket from Ford and soldering it into position.Thanks for your help.Robfor those who are interested, I installed some more lighting in my 05 bf xr6t ute with standard sound, the colour of the wires were:green with yellow stripe and gray dots = hot/constantblack with blue stripe and gray dots = triger ( its not earthed still treat is as an cold/neg/earth)mine were located behind drivers side kick panelif you want to double check the colours that the cover off the dome light and you should be able to see the two. Link to comment Share on other sites More sharing options...
Banned1 Banned Banned 734 Member For: 14y 2m 10d Gender: Male Location: Caloundra Posted 28/09/10 07:35 AM Share Posted 28/09/10 07:35 AM just found this ! went and checked mine ! all specced up and no floor light bulbs ? put blue ones in and looks nice ! passenger side is a little obscured where it is but still works... to the bloke that found this put on the FG ! Link to comment Share on other sites More sharing options...
hawlass Silver Donating Members 1,161 Member For: 17y 13d Gender: Male Location: left right out Posted 28/09/10 07:41 AM Share Posted 28/09/10 07:41 AM Anyone tried extending the wire/bulb holder on the passengers side to get the bulb lower , allowing more light onto the footwell? Link to comment Share on other sites More sharing options...
DashMatt Member 3 Member For: 14y 8m 27d Posted 28/09/10 08:20 AM Share Posted 28/09/10 08:20 AM I disconnected the bulb holder from the dash by a half turn, then let the holder hang down behind the glove box. You could cable tie but mine just sits next to loom (you dont want it swinging)Did it to both sides as I use 1W Blue Leds and the location didn't suit the spread of light from the LED... Link to comment Share on other sites More sharing options...
hawlass Silver Donating Members 1,161 Member For: 17y 13d Gender: Male Location: left right out Posted 28/09/10 08:35 AM Share Posted 28/09/10 08:35 AM Did that on the drivers side of the bf-- looks a better light Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now