Cam Member 397 Member For: 21y 10m 15d Location: Brisbane Posted 07/05/03 09:36 PM Share Posted 07/05/03 09:36 PM The SMD resistors I have are from Jaycar Part No. KK2060. This is a nice plastic box with 50 of each of 72 values from 0R0 to 10M.The SMD LEDs are also from Jaycar, they are Part no ZD2020. They come in stips of 6 LEDs - so you will need 3 packs and will have 4 left over when finished. Link to comment Share on other sites More sharing options...
Cam Member 397 Member For: 21y 10m 15d Location: Brisbane Posted 07/05/03 09:39 PM Share Posted 07/05/03 09:39 PM One other thing, unless you already have suitable tweesers (very fine point, anti static, non magnetic) then you should get Jaycar Part no TS1754 (SMD Tweesers).These tweesers are shown in the SMD photos I posted yesterday. Link to comment Share on other sites More sharing options...
XR6TK1W1 Member 435 Member For: 21y 8m 20d Location: Wellington NZ Posted 08/05/03 04:30 AM Author Share Posted 08/05/03 04:30 AM Cam good to see all woks fine. I was sweating for a while I had put you crook. The fairmont switches light up white and would cost alot more than the home done way. And to top it off the single switches are more expensivce than the drivers swtich, go figure. I think the Aussie price is $150 drivers $175 single. Where its mostlikely $80 done yourself. And Potai if you find SM LED's let me know where from as I have to redo my drivers switch due to the auto window failing. Warrenty job but Metro will just supply the switch and let me mod it myself. Link to comment Share on other sites More sharing options...
XR6TK1W1 Member 435 Member For: 21y 8m 20d Location: Wellington NZ Posted 08/05/03 04:33 AM Author Share Posted 08/05/03 04:33 AM Staggerlee its not hard mate as long as you are carefull and follow either NT Turbos tech sheet for non premium sound or mine for Premium sound you should be right. Now that others have done it we know that we are correct so just go line by line from the sheet and waaalaaaaa blue lights. Link to comment Share on other sites More sharing options...
Cam Member 397 Member For: 21y 10m 15d Location: Brisbane Posted 08/05/03 05:11 AM Share Posted 08/05/03 05:11 AM And Potai if you find SM LED's let me know where from as I have to redo my drivers switch Jaycar has a Wellington store (and others in NZ as well)Here are details for wellington store (found at www.jaycar.com.au)WELLINGTON23 Kent TerracePh. 04 801 9005Also I believe you can order online from Jaycar. Link to comment Share on other sites More sharing options...
XR6TK1W1 Member 435 Member For: 21y 8m 20d Location: Wellington NZ Posted 08/05/03 05:16 AM Author Share Posted 08/05/03 05:16 AM Cheers Cam!!!! I just looked up Jaycar here and it only lists an Auckland one but you came through with the info. Guess I'm off to redo the whole lot now. Link to comment Share on other sites More sharing options...
NT TURBO Member 1,128 Member For: 21y 9m Gender: Male Location: Darwin NT Posted 08/05/03 05:35 AM Share Posted 08/05/03 05:35 AM As you are required to alter the original circuit slightly, I think the SMD's will quite difficult to fit to non premium sound window switches?? Link to comment Share on other sites More sharing options...
Cam Member 397 Member For: 21y 10m 15d Location: Brisbane Posted 08/05/03 08:00 AM Share Posted 08/05/03 08:00 AM As you are required to alter the original circuit slightly, I think the SMD's will quite difficult to fit to non premium sound window switches?? Your probably right Link to comment Share on other sites More sharing options...
XR6TK1W1 Member 435 Member For: 21y 8m 20d Location: Wellington NZ Posted 08/05/03 08:06 AM Author Share Posted 08/05/03 08:06 AM Alter the circuit abit? If done right NT it should fit right to the points on the board designed to have surface mounted LED. The only diff with non premium and premium sound seems only to be the polarity. Follow my mount points on the drivers switch and it should be sweet. Plus the SMD should work properly on the top left drivers switch which is designed to be mounted under the contact rockers. Will let you know when I have done mine. Link to comment Share on other sites More sharing options...
NT TURBO Member 1,128 Member For: 21y 9m Gender: Male Location: Darwin NT Posted 08/05/03 08:18 AM Share Posted 08/05/03 08:18 AM K!W!, I TRIED THAT!!!, trust me the way I did it was the only way it would work as +pos in to +pos at the end of the circuit doesn't give a potential difference. My last post was a note for those without premium sound contemplating it. (You have a -neg pin in, yeah. The rest of my switch wiring is the same I think) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now