XtRmn8 570Nm @1800rpm Donating Members 2,441 Member For: 21y 5m 3d Gender: Male Location: Perth, WA Posted 06/02/05 02:25 PM Share Posted 06/02/05 02:25 PM (edited) One questions to start! How much is the complete APS intercooler kit for the XR Turbo??What other options are there in terms of bigger intercoolers and what sort of money are we talking??Also can people who have done the following give an indication of cost (parts only)- Injectors ($500?)- Fuel pump ($350?)Cheers! Edited 06/02/05 02:38 PM by XtRmn8 Link to comment Share on other sites More sharing options...
tupperware Member 113 Member For: 22y 1m 28d Location: South Brizzy Posted 06/02/05 06:49 PM Share Posted 06/02/05 06:49 PM Intercoolers:Stock ....370 x 175 x 55 = 3,500cm3APS .......508 x 351 x 89 = 16,000cm3 AVO ......457 x 355 x 89 = 14,500cm3 Nizpro .. 450 x 365 x 57 = 9,400cm3PWR .....375 x 345 x 57 = 7,400cm3APS:$1897 inc piping, power steering cooler & extras (excludes wastgate valve & actuator - add ~$200)AVO:$1700 approx, inc piping & extras -includes piping over rocker cover to throttlebody. Has just been released ie currently only 1 in stockNizpro:$?? Core by PWRPWR:$880, single pass core, direct replacement (<2psi across core vs 4psi stock). No piping changes required. This core is different from their first one which many people didn't like. The first IC was a twin pass designed for a stock or very slightly modded car. It's still available at $825, but not really worth the effortChiptorque:IC coming soon. Core by PWRARE:Nothing yetDNA:Nothing yetRedcliffe Dyno:They have one available, don't know anything about it - best speak direct to himDynoWog:He's importing cores I believe -best speak direct to himCAPA:Water to air unit for around $3500There are others out there. Personally I'm chasing another stockist. It seems a few are using PWR of varying sizes and end tanks. Unfortunately there is a lot more to ICs than just dimensions. This is only a guide & info is from what I've been told & will probably be correctly by othersHope that helps a little & might save a few phone calls. Good luckRegards,Cameron Link to comment Share on other sites More sharing options...
Flukey Seriously Flukey Member Donating Members 4,354 Member For: 20y 11m 3d Gender: Male Location: Melbourne Posted 06/02/05 09:21 PM Share Posted 06/02/05 09:21 PM Cameron, you are a wealth of information mate. Link to comment Share on other sites More sharing options...
XtRmn8 570Nm @1800rpm Donating Members 2,441 Member For: 21y 5m 3d Gender: Male Location: Perth, WA Posted 07/02/05 01:10 AM Author Share Posted 07/02/05 01:10 AM Intercoolers:Stock ....370 x 175 x 55 = 3,500cm3APS .......508 x 351 x 89 = 16,000cm3 AVO ......457 x 355 x 89 = 14,500cm3 Nizpro .. 450 x 365 x 57 = 9,400cm3PWR .....375 x 345 x 57 = 7,400cm3APS:$1897 inc piping, power steering cooler & extras (excludes wastgate valve & actuator - add ~$200)AVO:$1700 approx, inc piping & extras -includes piping over rocker cover to throttlebody. Has just been released ie currently only 1 in stockNizpro:$?? Core by PWRPWR:$880, single pass core, direct replacement (<2psi across core vs 4psi stock). No piping changes required. This core is different from their first one which many people didn't like. The first IC was a twin pass designed for a stock or very slightly modded car. It's still available at $825, but not really worth the effortChiptorque:IC coming soon. Core by PWRARE:Nothing yetDNA:Nothing yetRedcliffe Dyno:They have one available, don't know anything about it - best speak direct to himDynoWog:He's importing cores I believe -best speak direct to himCAPA:Water to air unit for around $3500There are others out there. Personally I'm chasing another stockist. It seems a few are using PWR of varying sizes and end tanks. Unfortunately there is a lot more to ICs than just dimensions. This is only a guide & info is from what I've been told & will probably be correctly by othersHope that helps a little & might save a few phone calls. Good luckRegards,CameronThanks mate!! So I gather that APS and AVO look the goods! AVO being better value! Link to comment Share on other sites More sharing options...
fordboy1981 Donating Members 2,075 Member For: 22y 1m 7d Gender: Male Location: Sydney, NSW Posted 07/02/05 01:30 AM Share Posted 07/02/05 01:30 AM Can we get a some pics of the new PWR??I think the older PWR intercooler isn't too bad...it would definately be able to handle more boost/power then the stocko and at $825, it's a bargain!!!Dave. Link to comment Share on other sites More sharing options...
fordboy1981 Donating Members 2,075 Member For: 22y 1m 7d Gender: Male Location: Sydney, NSW Posted 07/02/05 01:47 AM Share Posted 07/02/05 01:47 AM I think this is the bigger XR6T intercooler from PWR...Fecking nice!!Dave. Link to comment Share on other sites More sharing options...
XtRmn8 570Nm @1800rpm Donating Members 2,441 Member For: 21y 5m 3d Gender: Male Location: Perth, WA Posted 07/02/05 02:06 AM Author Share Posted 07/02/05 02:06 AM I think this is the bigger XR6T intercooler from PWR...Fecking nice!!Dave.NICE!!! $880 is a very good price but is it good?Would something like this be sufficient for the 10PSI edit map??? Tuna?? Link to comment Share on other sites More sharing options...
JB Forum Superhero Donating Members 3,109 Member For: 21y 2m 29d Location: Eastern Suburbs of Mexico Posted 07/02/05 02:35 AM Share Posted 07/02/05 02:35 AM I think this is the bigger XR6T intercooler from PWR...Fecking nice!!Dave.Dave apparently there have been members that have fitted the PWR cooler and have gone backwards in power. It has not had glowing reviews. Link to comment Share on other sites More sharing options...
Blown BA In Your Face Member 6,195 Member For: 21y 11m 16d Gender: Male Location: Peninsula Posted 07/02/05 05:25 AM Share Posted 07/02/05 05:25 AM I think this is the bigger XR6T intercooler from PWR...Fecking nice!!Dave.<{POST_SNAPBACK}>Dave apparently there have been members that have fitted the PWR cooler and have gone backwards in power. It has not had glowing reviews. <{POST_SNAPBACK}>Wouldn't touch them Link to comment Share on other sites More sharing options...
ms700 Moderating Team 10,170 Member For: 22y 24d Gender: Male Location: Sydney Posted 07/02/05 09:28 AM Share Posted 07/02/05 09:28 AM I think this is the bigger XR6T intercooler from PWR...Fecking nice!!Dave.<{POST_SNAPBACK}>Dave apparently there have been members that have fitted the PWR cooler and have gone backwards in power. It has not had glowing reviews. <{POST_SNAPBACK}>Wouldn't touch them <{POST_SNAPBACK}>I believe it was their old "twin pass" cooler that a few members fitted to the ir T's, and removed them just as quick. It will be interesting to see how the new "single pass" goes. Twin pass = twice as much restriction.I run a PWR core in the XC, it seems to work very well. We designed our own end tanks to TIG onto it. I usually run about 8 degrees above ambient in the XC. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now