GlennAUII Former XT pilot Lifetime Members 4,791 Member For: 21y 7m 1d Gender: Male Location: The Womb Posted 29/01/05 01:23 AM Share Posted 29/01/05 01:23 AM There's a little kit you can get from bunnings....It's in a red plastic thingy?? sorry, technical I know.. But you get torx bits and phillips, straight etc and they are all hex drive socket jobbies..I'll post a photo later on so you can seee..cost about $5/7..<{POST_SNAPBACK}>thanks, $5/7 sound more reasonable than $90+ Link to comment Share on other sites More sharing options...
F6 UTE - Track Bound EVO III - Member 3,367 Member For: 20y 2m 9d Gender: Male Location: Strapped in and holding on Posted 30/01/05 03:53 AM Share Posted 30/01/05 03:53 AM Here you go.... I think you find it in the 'tool shop' at Bunnings.. Link to comment Share on other sites More sharing options...
GlennAUII Former XT pilot Lifetime Members 4,791 Member For: 21y 7m 1d Gender: Male Location: The Womb Posted 30/01/05 04:03 AM Share Posted 30/01/05 04:03 AM Ripper! thanks man! /me adds xrt ute to christmas card list Link to comment Share on other sites More sharing options...
saleen Big Gun Donating Members 4,170 Member For: 22y 4m 14d Gender: Male Location: NSW Posted 30/01/05 05:41 AM Share Posted 30/01/05 05:41 AM im an ameture when it comes to cars ChrisAre you related to Goldie? :lol: ScottyNoI said cars not girls :lol:Sharp as chips!!!!!!!Well said. Link to comment Share on other sites More sharing options...
GlennAUII Former XT pilot Lifetime Members 4,791 Member For: 21y 7m 1d Gender: Male Location: The Womb Posted 30/01/05 07:40 AM Share Posted 30/01/05 07:40 AM I went to bunnings and they had only 1 set large enough. I bought them and got them hom realising I needed 5 point ones.. these were 6 point! FARKING HELL!! Link to comment Share on other sites More sharing options...
F6 UTE - Track Bound EVO III - Member 3,367 Member For: 20y 2m 9d Gender: Male Location: Strapped in and holding on Posted 30/01/05 02:31 PM Share Posted 30/01/05 02:31 PM Well that sux.. Maybe try a different bunnings, coz I got mine and maybe it was a fluke, but they fit o.k... Murphys law though aint it..Still on teh chrissy card list though??????????????????????? Link to comment Share on other sites More sharing options...
GlennAUII Former XT pilot Lifetime Members 4,791 Member For: 21y 7m 1d Gender: Male Location: The Womb Posted 31/01/05 07:03 AM Share Posted 31/01/05 07:03 AM Well that sux.. Maybe try a different bunnings, coz I got mine and maybe it was a fluke, but they fit o.k... Murphys law though aint it..Still on teh chrissy card list though???????????????????????<{POST_SNAPBACK}>Yeh your still on it. I think I'll get it done through Q ford @ springwood. I've got a few quotes:Metro Ford @ the valley- $93Southside ford @ the gabba- $85Bryan Byrt ford @ Mt Gravatt- $70Q Ford @ springwood- $30-$50. Link to comment Share on other sites More sharing options...
ms700 Moderating Team 10,170 Member For: 22y 24d Gender: Male Location: Sydney Posted 31/01/05 08:22 AM Share Posted 31/01/05 08:22 AM Whatever you's do, if you are using your own TORX bits, make sure you use the correct one! If you use a slightly smaller one, it may still grip the bolt, but will strip the head of the bolt completely, making removal of that TORX bolt extremely difficult. You will need to drill out the bolt, and considering how close the air bag is, it can get rather dangerous! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now