ktford FORD FORD FORD Donating Members 9,390 Member For: 21y 10m 26d Gender: Male Location: Victoria Point In Brissy's eastern side Posted 18/10/04 10:24 PM Share Posted 18/10/04 10:24 PM Hey Jeff,I got some 19mm Garden hose if you want, 400rwkw ya crazy kid. Ya better get a drop tank fitted while you are at it, what capacity do the fuel lines carry tank to donk?Scotty Link to comment Share on other sites More sharing options...
Lawsy Wanabe mechanical engineer Donating Members 960 Member For: 20y 4m 26d Gender: Male Location: At the computer, obviously..... Posted 18/10/04 11:28 PM Share Posted 18/10/04 11:28 PM Dunno, but I bet those lines would need to be the diameter of a drain pipe just to get enough fuel up there!lol :D Link to comment Share on other sites More sharing options...
xlr8ed Phantom lives Member 1,417 Member For: 20y 9m 22d Gender: Male Location: who knows Posted 20/10/04 03:50 AM Author Share Posted 20/10/04 03:50 AM Hey Jeff,I got some 19mm Garden hose if you want, 400rwkw ya crazy kid. Ya better get a drop tank fitted while you are at it, what capacity do the fuel lines carry tank to donk?Scotty So far I have to run a 600hp in tank pump to a surge tank then a 7-800hp pump to the injector rail.. But as for injectors I may have to use the bosch 363,s...jeff Link to comment Share on other sites More sharing options...
10sec_rx7 Member 13 Member For: 20y 5m 30d Posted 21/10/04 01:25 AM Share Posted 21/10/04 01:25 AM you should have a look around instead of just sticking with bosch stuff, there are a lot of brand around that will fit in the T's with out any mods, I can pretty much get anything from 500cc to 1600cc that will fit straight in, my pick would be the MSD 720cc jobs.dale Link to comment Share on other sites More sharing options...
xlr8ed Phantom lives Member 1,417 Member For: 20y 9m 22d Gender: Male Location: who knows Posted 21/10/04 02:03 AM Author Share Posted 21/10/04 02:03 AM you should have a look around instead of just sticking with bosch stuff, there are a lot of brand around that will fit in the T's with out any mods, I can pretty much get anything from 500cc to 1600cc that will fit straight in, my pick would be the MSD 720cc jobs.dale Thanks Dale I did that and I got some Rochester 750cc injectors which is getting fitted as I type...Thanks to all for sound advice..Except Scotty's garden hose trick, my misses attacked me for chopping up the hose... jeff Link to comment Share on other sites More sharing options...
thebrunks Member 665 Member For: 20y 7m 2d Location: Gold Coast Posted 21/10/04 06:08 AM Share Posted 21/10/04 06:08 AM Hey Jeff ya wanta sell your old injectors???Russ Link to comment Share on other sites More sharing options...
xlr8ed Phantom lives Member 1,417 Member For: 20y 9m 22d Gender: Male Location: who knows Posted 21/10/04 01:06 PM Author Share Posted 21/10/04 01:06 PM I will have to get back to you Russ,, Other guys have put dibbs on them so I will have to check with them first..jeff Link to comment Share on other sites More sharing options...
10sec_rx7 Member 13 Member For: 20y 5m 30d Posted 21/10/04 11:20 PM Share Posted 21/10/04 11:20 PM you should have a look around instead of just sticking with bosch stuff, there are a lot of brand around that will fit in the T's with out any mods, I can pretty much get anything from 500cc to 1600cc that will fit straight in, my pick would be the MSD 720cc jobs.daleThanks Dale I did that and I got some Rochester 750cc injectors which is getting fitted as I type...Thanks to all for sound advice..Except Scotty's garden hose trick, my misses attacked me for chopping up the hose... jeff rochester-MSD = same MSD branded ones are cheaper for some reason! Link to comment Share on other sites More sharing options...
xlr8ed Phantom lives Member 1,417 Member For: 20y 9m 22d Gender: Male Location: who knows Posted 22/10/04 04:23 PM Author Share Posted 22/10/04 04:23 PM Ok tried the rochesters and they are no good..Cant take enough fuel out of them to run on idle.. So now fitting the 363's...jeff Link to comment Share on other sites More sharing options...
10sec_rx7 Member 13 Member For: 20y 5m 30d Posted 24/10/04 11:08 PM Share Posted 24/10/04 11:08 PM Ok tried the rochesters and they are no good..Cant take enough fuel out of them to run on idle.. So now fitting the 363's...jeff<{POST_SNAPBACK}>the uni chip couldnt pull enough fuel out?? I have seen this before with uni chips on other cars,when you start making big power you are going to need bigger squirters than the 363's, you might have to look at a managment upgradeDale Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now