Tyre Pressures

[Cashie]

Now that I have been running the ute for a couple of weeks I am keen to experiment a bit with the tyre pressures.

What pressures front and rear have all you ute guys found to be best?

[Turbo6man]

Start with 40 psi front and 36 psi rear - if you put it down the strip drop your rears to 20 psi.

If you are towing or load her up put 40 psi in the rears.

Keep a close eye on your rear tyre wear - if they start to wear in the centres drop the pressure by 2 - 4 psi. And, if you do this you may then also have to drop your fronts to 38 psi.

[THEMESHMAN260]

Put nitrigen in your tyres about $5.00 a tyre and you will not have any problumes

that is what I have done with my GT-P 36psi it seems to ride better

[XR6_ED]

running 36 psi front and rear

tyre wear is even across the tyre

rears have less tread than the front..I wonder why

[Mr_GT]

I run 35 psi all round in my ute, and I carry a big load in it everyday.

I was running 32psi, but found it scraping the front bar everywhere, too low.