Jump to content

Recommended Posts

  • Member
  • Member For: 21y 8m 16d
  • Location: Broken Hill

Just wondering what affect the unichip has on the ECU tuning wise.

Basically I just had mycomputer wiped clear of errors and stuff, and now the car is playing up big time!!

The car revs to like 2500 revs when I first start it in the morning and stays there for ages!!! When I selected reverse for the first time the car seeming runs out of petrol, making huge thumping noises!! But once its warm it all runs fine!!

Just wondering if wiping the ECU would affect the unichip in anyway??

  • My new toy
  • Lifetime Members
  • Member For: 22y 14d
  • Gender: Male
  • Location: stanthorpe wine capital of qld.

The unichip should not effect the computor in this way.

Does the engine light come on when this happens.

It may be a throttle body probelm.

what codes were in there to begin with.

Ian

  • Good for nothing member
  • Donating Members
  • Member For: 20y 10m 11d
  • Location: Sydney
  HUSTLER said:
Just wondering what affect the unichip has on the ECU tuning wise.

Basically I just had mycomputer wiped clear of errors and stuff, and now the car is playing up big time!!

The car revs to like 2500 revs when I first start it in the morning and stays there for ages!!! When I selected reverse for the first time the car seeming runs out of petrol, making huge thumping noises!! But once its warm it all runs fine!!

Just wondering if wiping the ECU would affect the unichip in anyway??

hustler I think there was a thread on this site a couple of months ago where someone said they had theyre ECU reflashed and the T started playing due to all the tuning going out of whack. the problem was fixed when they got they're car retuned at there unichip dealer. the car was fitted with a chip sory if I didnt already mention that

  • Member
  • Member For: 21y 8m 16d
  • Location: Broken Hill

Yeah the throttle fault light comes on when it happens!

I have had an ss inductions throttle body on for a few months now with no problems, but the first time I put the car into reverse after having the computer wiped clean, its done this weird stuff!! The fact that after the car warms up I can stick ti in reverse as many times as I like without any trouble!!

The other thing the guys at ford did was fix a fuel line near the tank, they had to drop the whole back end out to fix it!! It as if the car is running out of petrol and then stalling! Its the exact feeling you get when u try to roll start a car with a flat batt, just goes thump thunp thump!!

  • Member
  • Member For: 21y 8m 16d
  • Location: Broken Hill
  Trough Lolly said:
might be the dodgy mechanic that put the throttle body on darren..

just a guess?

:)

Well keep it to yaself I dunt wanna hear ya crap!!

Funny how its worked perfect till ford touched it!!

  • Member
  • Member For: 20y 10m 27d
  GOLDIE said:
The unichip should not effect the computor in this way.

Does the engine light come on when this happens.

It may be a throttle body probelm.

what codes were in there to begin with.

Ian

Ian

Re: throttle body prob. I too have high idle on cold start up. Ford did'nt believe it would be a throttle body problem and did a flash upgrade instead which hasn't helped. Whats involved in cleaning the throttle body and does it have to be done by Ford?

By the way - SSinduction / Filter and Centre Muffler mods only, no chip

Steve

  • My new toy
  • Lifetime Members
  • Member For: 22y 14d
  • Gender: Male
  • Location: stanthorpe wine capital of qld.

Throottle body can be cleaned using a clean rag and opening the butterfly and wiping it out this may help but I think you will find it is the electrics in the throttle body itself.

I have seen 2 xr8's in the last week with the same problem and that's what they needed.

Ian

  • Member
  • Member For: 20y 7m 28d
  • Gender: Male
  • Location: Mildura

when u take the car for a re-tune try and run local petrol instead of the city fuel.. just incase it differs.. (which it shouldnt but you never know)

try spraying some of that throttle body cleaner inside (retails about $8 a can).. just unhook your intake pipe and spray while holding revs at about 2500/3000.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'