XR6_ED Member 1,517 Member For: 21y 9m 26d Posted 17/09/04 09:12 AM Author Share Posted 17/09/04 09:12 AM Clutch mod 3 is now completeafter testing different pressure plates and clutch plates I have now settled onAluminium flywheel with steel insertcushion ceramic clutch plate with thicker buttonsuprated pressure plate rated at 1000kg load instead of factory 800kgThere is little to no clutch shudder as it depend on how much revs and clutch release...The factory used to shudder accordingly under the same conditionsNow the weakest link is fixed its time to find the next one with a horespower increase If anyone wants info on this clutch upgrade just PM me and I will point you in the right direction Link to comment Share on other sites More sharing options...
JB Forum Superhero Donating Members 3,109 Member For: 21y 1m 13d Location: Eastern Suburbs of Mexico Posted 17/09/04 09:25 AM Share Posted 17/09/04 09:25 AM there isnt anything keeping you to only using the kits to mod your car, you can look at Geea for example, although he doesnt use a unichip.I will be getting a phase 1 and doing my own intake/exhaust/intercooler work and getting a retune on that. It wouldnt look as good as the APS product I am sure but it could work out to be a cheaper option and yield similar results. Hey Turb06 have you been looking over my fence? Stay tuned in the next couple of weeks!What you have just described will be represented in power figures shortly. All I can say is there is a unichip involved and the legacy of BOOF. Just need to iron out some bugs Link to comment Share on other sites More sharing options...
XR6_ED Member 1,517 Member For: 21y 9m 26d Posted 17/09/04 09:35 AM Author Share Posted 17/09/04 09:35 AM there isnt anything keeping you to only using the kits to mod your car, you can look at Geea for example, although he doesnt use a unichip.I will be getting a phase 1 and doing my own intake/exhaust/intercooler work and getting a retune on that. It wouldnt look as good as the APS product I am sure but it could work out to be a cheaper option and yield similar results.Hey Turb06 have you been looking over my fence? Stay tuned in the next couple of weeks!What you have just described will be represented in power figures shortly. All I can say is there is a unichip involved and the legacy of BOOF. Just need to iron out some bugs :w00t: this could be interesting Link to comment Share on other sites More sharing options...
macka'sxr6t Member 1,480 Member For: 20y 7m 13d Location: Mildura Posted 17/09/04 09:52 AM Share Posted 17/09/04 09:52 AM I will be getting a phase 1 and doing my own intake/exhaust/intercooler work and getting a retune on that. It wouldnt look as good as the APS product I am sure but it could work out to be a cheaper option and yield similar results.I have just finished my intake piping mod to go with my shaker intake. It is ready now for my custom made intercooler.Nothing wrong with APS products but I'm glad that I'm doing my own thing. My Hp will rate with the best of them and will look a lot better than most.That is the good thing about these cars there is so many ways to get them to perform well.macka Link to comment Share on other sites More sharing options...
XR6_ED Member 1,517 Member For: 21y 9m 26d Posted 17/09/04 10:02 AM Author Share Posted 17/09/04 10:02 AM That is the good thing about these cars there is so many ways to get them to perform well. The trouble is ,you get so used to the power gain and then you have to do more mods to get that "just bought it feel" again Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now