ktford FORD FORD FORD Donating Members 9,390 Member For: 21y 11m 23d Gender: Male Location: Victoria Point In Brissy's eastern side Posted 03/04/05 10:01 PM Share Posted 03/04/05 10:01 PM Hey Phil,I'm sure your pillow will be happy for the reprieveScottyp.s. Menace, you full of hot air man Link to comment Share on other sites More sharing options...
Flukey Seriously Flukey Member Donating Members 4,354 Member For: 20y 11m 19d Gender: Male Location: Melbourne Posted 04/04/05 07:12 AM Share Posted 04/04/05 07:12 AM 10.351 seconds138.6 mph 6 speed15 psi slicks455 kw at wheelsOK I'll bite. *cough* bullsh*t *cough*When, where, and who were the witnesses.Is it a T or something else? Link to comment Share on other sites More sharing options...
geea Site protagonist Lifetime Members 4,320 Member For: 21y 10m Gender: Male Location: At the lights, waiting for you. Posted 04/04/05 07:17 AM Share Posted 04/04/05 07:17 AM 10.351 seconds138.6 mph 6 speed15 psi slicks455 kw at wheels<{POST_SNAPBACK}>OK I'll bite. *cough* bullsh*t *cough*When, where, and who were the witnesses.<{POST_SNAPBACK}>Is it a T or something else?<{POST_SNAPBACK}>I'd think that with 15psi and 455rwkw's it would probably be a twin turbo'd V8 of some sort.I've heard of a very powerful XR8 that could be making those numbers. last I heard though it hadn't been down the 1/4 yet.Geea. Link to comment Share on other sites More sharing options...
FPV TRANNY Im the one and only Donating Members 3,557 Member For: 20y 2m 5d Gender: Male Location: In my house Posted 04/04/05 07:28 AM Share Posted 04/04/05 07:28 AM 10.351 seconds138.6 mph 6 speed15 psi slicks455 kw at wheelsYeah my T made that to. NOT!!!!!!!!!! Link to comment Share on other sites More sharing options...
blueboost Member 1,204 Member For: 20y 9m 13d Gender: Male Location: Mackay NorthQueensland Posted 04/04/05 09:39 AM Share Posted 04/04/05 09:39 AM Hi, I just got my xr6t's power lifted on the weekend, I have put a PWR cooler on since last tune, my car has standed exhaust, injecters, and exede, (the cat flows free ) and it pulled 273.6rkw, in north QLD, inlet temp in air box was 36 degrees, out side temp was about 31degrees, I ran 12.6 @107 with 240 rkw, so when I go to the drags next month I hope to run a high 11. I know I am pushing my luck, but I have a 3000 stall and I ran a 1.8 60 ft last time, so if I can dip into the 1.7's I think it will be close. I think it will be the first T into the 11's in NQ. is that right , I would like to talk anyone that has, up here if I am wrong, ( just had to tell someone) Link to comment Share on other sites More sharing options...
FPV TRANNY Im the one and only Donating Members 3,557 Member For: 20y 2m 5d Gender: Male Location: In my house Posted 04/04/05 09:46 AM Share Posted 04/04/05 09:46 AM Hi, I just got my xr6t's power lifted on the weekend, I have put a PWR cooler on since last tune, my car has standed exhaust, injecters, and exede, (the cat flows free ) and it pulled 273.6rkw, in north QLD, inlet temp in air box was 36 degrees, out side temp was about 31degrees, I ran 12.6 @107 with 240 rkw, so when I go to the drags next month I hope to run a high 11. I know I am pushing my luck, but I have a 3000 stall and I ran a 1.8 60 ft last time, so if I can dip into the 1.7's I think it will be close. I think it will be the first T into the 11's in NQ. is that right , I would like to talk anyone that has, up here if I am wrong, ( just had to tell someone)Blue boost whats your car like with the stall in it.Im thinking of a 3000 stall as well but people are telling me no.I think with it I can do better 60 footers cause that's why im lacking a good 1/4 time Link to comment Share on other sites More sharing options...
xrdreaming Lifetime Members 1,693 Member For: 22y 1m 11d Gender: Male Location: Melbourne Posted 04/04/05 09:55 AM Share Posted 04/04/05 09:55 AM Have you had an edit done? Cause there are plenty of people in Melbourne who have high stalls but the car goes into limp mode if you try and stall it up with your foot on the brake Link to comment Share on other sites More sharing options...
FPV TRANNY Im the one and only Donating Members 3,557 Member For: 20y 2m 5d Gender: Male Location: In my house Posted 04/04/05 09:59 AM Share Posted 04/04/05 09:59 AM Have you had an edit done? Cause there are plenty of people in Melbourne who have high stalls but the car goes into limp mode if you try and stall it up with your foot on the brakeYes unichip Link to comment Share on other sites More sharing options...
blueboost Member 1,204 Member For: 20y 9m 13d Gender: Male Location: Mackay NorthQueensland Posted 04/04/05 10:10 AM Share Posted 04/04/05 10:10 AM My stall is good, it is too big if I am on the street with out the nitto's , but good driving and you can still get a quick take off, it doubles the touque down low. very easy to pull 1.8's 60ft on drag strip. ( with nitto's). driving around town it rev's up abit , because it stays in higher gear , under light load, but I like it and it has power like a big block any time, if I drive it in manual mode, you don't even notice it , untill you put your foot down, and it made the hit from the higher preasures I have put in the auto a lot smoother. I think an auto with just stage 1 will pull 12's with nitto's, and 3000 stall. hope this helps. Link to comment Share on other sites More sharing options...
blueboost Member 1,204 Member For: 20y 9m 13d Gender: Male Location: Mackay NorthQueensland Posted 04/04/05 10:18 AM Share Posted 04/04/05 10:18 AM Xdreaming the xr6t does not go into limp mode with stall. xr8's , and GT's , and non turbo xr6's will. I think it is because the xr6t does not lock up like the other ones, it has the solinoid in it but the computer does not lock it. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now